• Proceedings of the Petrological Society of Korea Conference
• /
• 2001.06a
• /
• pp.4-6
• /
• 2001

• Ceramist
• /
• v.12 no.3
• /
• pp.22-29
• /
• 2009

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.235-241
• /
• 2013

In this study, a mortar was produced using re-dispersible polymer powders that addresses the defects of aqueous polymer and improves the durability of cement mortar. Also, an attempt was made to examine the properties of polymer modified mortars using re-dispersible polymer powders by strength and durability tests between ordinary Portland cement mortars and polymer modified mortars mixed with aqueous dispersion. The test showed that strength and durability are improved considerably compared with ordinary Portland cement mortar, and the performance of aqueous polymer cement mortar was considerably improved. Accordingly, it is expected that high-quality prepackaged polymer modified mortars can be produced using re-dispersible polymer powders.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.216-219
• /
• 2009

$V_2O_5$ nanowire / polyvinyl alcohol (PVA) polymer composite fibers were fabricated by a new simple method. The reaction of PVA and acetone facilitates the formation of the polymer membrane which can be used to make the fiber. Composite fiber is percolative in the conductance because of the low percolation threshold in $V_2O_5$ nanowire networks. The fiber composite can be applied to the electromagnetic shielding originating from the conductive nature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.111-111
• /
• 2010

최근 전자 소자의 집적기술은 기존의 2차원에서 System on package (SOP) 개념에 기반을 둔 3차원 집적 기술로 발전 되어가고 있다. 소자의 3차원 실장을 실현시키는 과정에서 세라믹의 여러 유용성이 언급되어져 왔지만, 취성이 매우 크다는 등의 단점이 있었다. 이러한 이유로 연성을 가지는 폴리머와 세라믹을 합성한 복합체 기판에 대하여 많은 연구가 되고 있다. 그러나 세라믹 제작을 위해서는 높은 공정온도가 요구되고 있고 이러한 높은 공정상에서의 온도는 3차원 실장에 있어서 문제점이 되고 있다. 이러한 문제점을 극복하기 위하여 상온에서 치밀한 세라믹 후막을 제작할 수 있는 공정인 Aerosol Deposition Method (ADM)방법으로 세라믹-폴리머 후막의 제조를 시도하였다. 일반적으로 ADM은 수백 나노의 출발 파우더를 사용하여 치밀한 세라믹 막을 형성하는데 사용된다. 본 연구에서는 ADM으로 100 nm미만의 나노 세라믹 파우더를 사용하여 다공성의 세라믹 후막을 제조한 후 resin을 함침시키는 방법으로 세라믹-폴리머 후막의 제조를 시도하였다. 그 결과 운송가스, aerosol 농도 등의 공정조건을 변화시켜 다공성의 $Al_2O_3$ 후막을 제조하였고, 이 다공성 후막은 반투명의 특성을 보이며 고충전율로 형성되었다. 이렇게 제조된 나노 다공성 $Al_2O_3$ 후막에 cyanate ester resin을 함침시키는 방법을 사용하여 $Al_2O_3$-cyanate ester 복합체 후막을 제조하였으며, 이의 비유전율 및 품질계수는 각각 1 MHz에서 6.7, 1000으로 우수한 유전특성을 보임이 확인되었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.159-160
• /
• 2022

The purpose of this study is to evaluate the adhesion in flexure depending on the cement type, polymer type, polymer-cement ratio, and silica fume ratio of the polymer-cement composites(PCCs) for crack repair in RC structures to induce optimal mix proportions. The adhesion in flexure of PCCs for crack repair of RC structure has a significant effect on the polymer type and polymer-cement ratio, and the adhesion in flexure is generally improved with mixing of silica fume as a mixture. The adhesion in flexure according to the type of polymer is slightly higher in the order of SAE, EVA, and SBR, and it is relatively high at the polymer-cement ratio of 60% or 80%. In addition, the adhesion in flexure of PCCs with silica fume ratio of 10% or 20% to the cement weight is higher than that without silica fume. In order to improve the adhesion in flexure of PCCs for repairing cracks in RC structures, the optimal mix design is to properly adjust the cement type, polymer type, polymer-cement ratio, and silica fume ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.181-182
• /
• 2023

This study is a study on the flexural adhesion performance of polymer cement composites(PCCs) repair section according to the crack depth, and the flexural adhesion strength was obtained through a flexural strength test of cement mortar that was filled into cracks and repaired to a certain thickness using PCCs made of ultra high-early strength cement and polymer dispersion of EVA. As a result of the study, the flexural adhesion performance according to the crack width and crack depth was expected to decrease the flexural adhesion strength as the crack depth increased at the crack width 3.0mm, but the crack width 2.0mm and 1.5mm did not show any tendency according to the crack depth. In addition, even in the final destruction, the fact that the cracks and bottoms filled with PCCs were not cut or dropped proves that PCCs have excellent adhesion and rich toughness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.124-124
• /
• 2005

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.184.1-184
• /
• 2003

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.87-96
• /
• 2004

Polymer/ceramic composites are the most promising embedded capacitor material for organic substrates application. Predicting the effective dielectric constant of polymer/ceramic composites is very important for design of composite materials. In this paper, we measured the dielectric constant of epoxy/$BaTiO_3$ composite embedded capacitor films with various $BaTiO_3$ particles loading for 5 different sizes $BaTiO_3$ powders. Experimental data were fitted to several theoretical equations to find the equation useful for the prediction of the effective dielectric constant of polymer/ceramic composites and also to estimate the dielectric constant of $BaTiO_3$ powders. The Lichtenecker equation and the Jayasundere-Smith equation were useful for the prediction of the effective dielectric constant of epoxy/$BaTiO_3$ composites. And calculated dielectric constants of the $BaTiO_3$ powders were in the range of 100 to 600, which were lower than those of $BaTiO_3$ bulk ceramics.