• 제목/요약/키워드: 폴리머콘크리트

검색결과 536건 처리시간 0.032초

폴리머계로 보수한 철근콘크리트 보의 휨성능 평가 (An Evaluation on the Flexural Strength of Concrete Beams Repaired by Polymer Resin)

  • 김병국;신영수;홍기섭;홍영균;최완철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제1권1호
    • /
    • pp.107-112
    • /
    • 1997
  • A series of reinforced concrete beams was tested to evaluate the flexural performance of the repaired RC beams. The key parameters for this study were the size and location of the patch, and the repair materials, including polymer, polymer-cementitious and cementitious materials. The repaired specimens failed by a typical flexural mode with minor interfacial bond failure. Beams repaired with polymer, polymer-cementitious and cementitious materials recover 100%, 91%, and 97% of the flexural strength respectively, while beams with cement mortar lose approximately 30% of the strength. Compared with the pressure injection techniques the specimens repaired with patching techniques show low flexural strength, with significant interfacial bond failure. Location and size of the repaired part do not affect the recovering performance. Interfacial behavior between repair and strengthening materials is the major influencing factor for the composite structures.

  • PDF

첨가제를 이용한 중온형 폴리머 개질 아스팔트 콘크리트 혼합물의 실용화 연구 (A Study on Field Applications of Polymer-Modified Warm Asphalt Concrete Mixture using Admixture)

  • 김낙석;이진구;박석순
    • 한국재난정보학회 논문집
    • /
    • 제6권1호
    • /
    • pp.28-43
    • /
    • 2010
  • This paper presents the field applications of polymer-modified warm asphalt mixture which can reduce the temperature during the production and field constructions. The amount of fuel consumptions and $CO_2$ diffusions can be reduced by much using the polymer-modified warm asphalt mixture instead of the conventional polymer-modified asphalt mixture. According to the research results, the polymer-modified warm asphalt mixture can be utilized without additional temperature increasement and performance sacrifice during the plant production and public service, respectively. As a result, it is considered that the application of the polymer-modified warm asphalt mixture has the potential of convenience in constructions management and reducing the environmental damages.

적산온도법에 의한 에폭시 모르터의 초기강도 예측 (The Early Strength Prediction of Epoxy Mortars by the Maturity Method)

  • 연규석
    • 한국농공학회지
    • /
    • 제42권2호
    • /
    • pp.99-107
    • /
    • 2000
  • The objective of this study are to compare the development of compressive strength of epoxy mortars used as repairing materials with respect to maturity , and to propose a model predicting strength development of epoxy mortars. A series of tests are carried out for the hardener contents of 30, 40 and 50 percentage of epoxy resin and compressive strengths are measured at the age of 6, 12, 24, 72, 120 and 168 hours respectively under the cure temperature of 0, 10, 20 and 3$0^{\circ}C$. The datum temperature is estimated by measured strengths, and the maturity is calculated with the estimated datum temperature. The compressive strength of epoxy mortars can be predicted by regression analysis from the maturity-compressive strength relationship.

  • PDF

결합재량에 따른 포러스 폴리머 콘크리트의 공극률과 강도 및 식생 블록 내 초기 생장 특성 (Void Ratio and Strength of Porous Polymer Concrete and Initial Growth Properties within Planting Block with Binder Contents)

  • 성찬용;김영익
    • 한국농공학회논문집
    • /
    • 제52권6호
    • /
    • pp.101-110
    • /
    • 2010
  • This study was performed to evaluate the void ratio and strength of porous polymer concrete used coarse aggregates and unsaturated polyester resin to find optimum mix design of porous polymer concrete for planting block. Also, this study was performed to evaluate the planting properties of herbaceous plant and cool-season grass in porous polymer blocks based on the experimental results of porous polymer concrete to develop environmentally friendly planting blocks. Tests for the void ratio and compressive strength of porous polymer concrete were performed at the curing age 7 days. Also, kinds of plants such as Tall fescue, Perennial ryegrass, Lespedeza and Alfalfa for planting were applied to porous polymer blocks. Within 6 weeks after seed, initial germination ratio, cover view and growth length for planting blocks were estimated by various methods.

에폭시 섬유판넬과 폴리머 모르타르로 단면보수된 수중구조물의 거동에 관한 실험적 연구 (An Experimental Study about Behavior of a Repaired Underwater Structure with an Epoxy Fiber Panel and Polymer Mortar)

  • 홍성남;박준명;유충준;한경봉;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권1호통권53호
    • /
    • pp.69-77
    • /
    • 2009
  • 수중구조물은 특수한 환경적 요인에 의하여 심한 열화상태에 놓이게 되며, 이러한 열화현상이 지속되게 되면 구조물은 철근의 부식과 콘크리트단면의 손실로 인하여 구조적으로 심각한 문제를 발생하게 된다. 수중구조물은 기중환경에서의 보수작업보다 매우 어려우며, 보수효과에 대한 증명도 불확실한 것이 현실이며, 기존의 보수공법은 외국의 사례를 보수효과의 검증없이 그대로 적용하거나, 경험에 의하여 시공되어져 왔다. 본 연구에서는 수중구조물에 대한 보수공법을 제안하고, 실험체의 거동특성과 보수재와 피보수재의 계면파괴를 관찰하여 제안된 보수공법의 효과를 비교 분석하였다.

성능 평가에 근거한 LB-DECK의 설계 (Design of LB-DECK Based on Performance Evaluation)

  • 조규대;노병철;조현철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권4호
    • /
    • pp.99-106
    • /
    • 2011
  • 본 연구는 LB-DECK의 합성 전과 후 적절한 설계방법을 적용하기 위하여 PBD의 기초 개념에 근거하여 성능향상을 위한 연구를 수행하였다. 그 결과, 합성 전 폴리머 콘크리트를 활용함에 따라 휨 인장강도를 증가시켜 미세균열을 감소시킬 수 있으며, 심미적인 효과를 기대할 수 있고, 낮은 침투성으로 인하여 내구성을 향상시키고, 이에 따른 피복두께를 감소시킬 수 있을 것으로 평가되었다. 또한 합성 후 경험적 설계법을 적용한 LB-DECK 바닥판은 일반적인 바닥판보다 하중 저항능력이 우수하여 안전성이 증가되며, 강도설계법 적용시와 달리 지간이 증가되어도 철근배근방법과 철근배근량이 일정하기 때문에 시공성과 경제성을 동시에 확보할 것으로 기대된다.

장경간 강바닥판 케이블교량에 적용하기 위한 폴리우레탄 폴리머콘크리트의 공용특성 연구 (A Study to Evaluate Performance of Poly-Urethane Polymer Concrete for Long-Span Orthotropic Steel Bridge)

  • 박희영;이정훈;곽병석;최이현;김태우
    • 한국도로학회논문집
    • /
    • 제15권1호
    • /
    • pp.1-9
    • /
    • 2013
  • PURPOSES: The purpose of this study is to evaluate physical properties, durability, fatigue resistance, and long-term performance of poly-urethane concrete (PU) which can be possible application of thin layer on long-span orthotropic steel bridge and to check structural stability of bridge structure. METHODS : Various tests of physical properties, such as flexural strength, tensile strength, bond strength and coefficient of thermal expansion tests were conducted for physical property evaluation using two types of poly urethane concrete which have different curing time. Freezing and thawing test, accelerated weathering test and chloride ion penetration test were performed to evaluate the effect of exposed to marine environment. Beam fatigue test and small scale accelerated pavement test were performed to assess the resistance of PU against fatigue damage and long-term performance. Structural analysis were conducted to figure out structural stability of bridge structure and thin bridge deck pavement system. RESULTS: The property tests results showed that similar results were observed overall however the flexural strength of PUa was higher than those of PUb. It was also found that PU materials showed durability at marine environment. Beam fatigue test results showed that the resistances of the PUa against fatigue damage were two times higher than those of the PUb. It was found form small scale accelerated pavement test to evaluate long-term performance that there is no distress observed after 800,000 load applications. Structural analysis to figure out structural stability of bridge structure and thin bridge deck pavement system indicated that bridge structures were needed to increase thickness of steel deck plate or to improve longitudinal rib shape. CONCLUSIONS: It has been known that the use of PU can be positively considered to thin layer on long-span orthotropic steel bridge in terms of properties considered marine environment, resistance of fatigue damage and long-term performance.

아스팔트 콘크리트의 노화 후 추출한 바인더의 물리적 특성 변화 (Change of Physical Properties of Binder Extracted from after Artificial Aging of Asphalt Concretes)

  • 김광우;도영수;김성운
    • 한국도로학회논문집
    • /
    • 제4권4호
    • /
    • pp.53-66
    • /
    • 2002
  • 아스팔트는 노화에 따라 물리적 특성변화가 일어난다. 하지만 같은 수준으로 노화시킨 아스팔트 혼합물들임에도 골재와 결합재 등에 따라 서로 다른 강성이나 취성을 보인다. 이는 노화에 의한 바인더 특성 변화의 차이에 기인한 것인데 이와 같이 혼합물 내에서 바인더의 물리적 특성 변화 차이에 영향을 주는 요인에 대한 연구는 별로 없다. 따라서 본 연구에서는 아스팔트 혼합물의 노화 후추출한 바인더의 물리적 특성을 측정하고 물성 차이에 영향을 미치는 요인을 분석하였다. 폴리머 3종류와 골재 두 종류, 두 가지 입도, 두 종류의 아스팔트를 사용하여 32종류의 혼합물을 제조하고, 이를 장 단기 노화 처리하였다. 각 혼합물의 노화 후 Abson recovery 방법으로 바인더를 추출 회생하고 바인더 물성 시험(침입도, 동점도, 절대점도)을 수행하였다. 이를 SAS를 이용하여 통계 분석하였다. 바인더 시험에서 골재 종류와 폴리머가 노화시 물성변화에 차이를 가져오는 심각한 요인임을 알 수 있었고, 입도는 점도 변화에 큰 영향을 미치는 인자인 것임을 확인할 수 있었다. 본 연구 결과, 혼합물 내의 바인더 물성은 골재 종류, 입도, 개질제의 종류, 바인더의 종류 등의 다양한 요인에 의해 많은 영향을 받는 다는 것을 알 수 있었다.

  • PDF

고유속 조건에서 하상재료의 안정성 평가 기법 개발에 관한 연구 (A Study on the Development of Stability Evaluation Technique for Bed Material Using High Speed Flow Measurement Instruments)

  • 정동규;김광수;김영도;박재현
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2018년도 학술발표회
    • /
    • pp.79-79
    • /
    • 2018
  • 하천시설물 설계, 시공 및 관리에 재료에 따른 호안이나 제방의 보호능력이 저하되어 설계 시 예상하지 못한 조건에서 쉽게 파손될 수 있으며, 하천환경의 변화를 야기시킬 수 있다. 제방 표면재료는 제외 비탈면의 침식 방지를 목적으로 사용되는 재료로 주로 호안블록. 식생 매트, 사석, 돌망태, 식생등이 주로 사용되며 국내에서는 2000년대 이전에는 자연 흙사면의 식생, 돌망태, 단순 돌기형 콘크리트 블록 등이 주로 사용되었으며 2000년대 이후에는 하천환경을 고려하여 식생의 생장이 가능한 친환경 호안 블록 및 식생 매트의 적용이 일반적인 실정이다. 제방의 수리적 설계를 위해서는 표면 재료의 수리 특성, 즉, 조도계수 및 한계 유속, 한계 소류력이 제시되어야 하는데 이는 실험을 통해서 결정되어야 한다. 때문에 본 연구에서는 자연형 하상재료를 이용하여 바이오 폴리머 첨가시 증가하는 방어능력에 대한 향상도를 평가하는 실험적 평가 방법을 제안하기위해 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 유속범위에 따른 세굴 및 침식에 대한 실험을 진행하였다. 본 연구에서는 실험연구를 통해 연구에 사용된 재료 외 추가적인 재료에 대해서도 평가방법이 적용될 수 있도록 제방 재료의 안정성 평가시스템을 개발하였고, 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 이러한 측정 장치를 이용하여 바이오폴리머의 첨가에 유무에 따라 세굴에 대한 방어능력의 향상정도를 측정하고자 세굴 및 침식에 대한 평가 방법을 제시하고 있다.

  • PDF

대나무 재를 혼합한 플라이에쉬 지오폴리머 콘크리트의 물리적 특성에 대한연구 (Mechanical Properties of Fly Ash Geopolymer Concrete Incorporating Bamboo Ash)

  • 샤픽빈이신크;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.33-34
    • /
    • 2019
  • Malaysia, as a tropical rainforest country, enjoys an abundance of bamboo plant that proliferate throughout the country. The application of geopolymer technology has become a trend and preserve the environment from harm. Fly ash geopolymer concrete has low early strength and requires 24 hours for the concrete to harden. Thus, the presence of calcium and potassium content in bamboo ash could remedy this problem. Besides, there is no research regarding the use of bamboo ash as a binder in geopolymer concrete. Therefore, the presence of bamboo ash could improve the research field with the use of agriculture waste in a building construction. This research aim is to use bamboo ash in the production of fly ash geopolymer concrete. The specimens were casted in $100mm{\times}100mm{\times}100mm$ cubes and sodium based activator were used as the alkaline solutions. The binders are formulated with different binder ratio. All test specimens were cured at ambient temperature ($23^{\circ}C-25^{\circ}C$) and 100% fly ash was chosen as control specimen. To determine the mechanical properties of fly sh geopolymer concrete with the presence of bamboo ash, compressive strength test was conducted. The test results depicted that as the percentage of bamboo ash decreases, compressive strength increases. Also, the addition of 5% of bamboo ash into fly ash geopolymer concrete could improve the early strength in 7 days. The results were proven with the result explained by X-ray fluorescence (XRF) and X-ray diffraction (XRD). Therefore, it can be concluded that the addition of bamboo ash improved the properties of fly ash geopolymer concrete at early ages.

  • PDF