• Resources Recycling
• /
• v.28 no.1
• /
• pp.32-39
• /
• 2019

The present study investigated hydration of alkali activated slag incorporating sulfate as a form of anhydrite by employing thermodynamic modeling using the Gibbs free energy minimization approach. Various parameters were evaluated in the thermodynamic calculations, such as presence of sulfide, precipitation/dissolution of AFt/AFm phase, and the effect of oxic condition on the predicted reaction. The calculations suggested no significant difference in the void volume and chemical shrinkage, which might influence the performance of the mixtures, in spite of various changes of the parameters. Although the types of hydration products and their amount varied according to the input conditions, their variations were smaller range than that induced by water-to-binder ratio. Moreover, it did not affect the amount of C-(N-)A-S-H which was the most important hydration product.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.179.2-180
• /
• 2003

본 연구에서는 과채류의 냉동냉장시 내부압력에 따른 조직파괴를 방지하기 위한 기초연구로 동결방법에 따른 내부압력 변화에 대하여 조사하였다. 과채류의 동결에 의한 중량감소율은 침지식 동결방식에서 0.44∼l.38% 수준으로 가장 적게 나타났으며, 동결방식에 따른 중량감소율 차이는 수박에서 가장 심하여 수분함량에 클수록 동결속도에 따른 효과가 비교적 크다는 것을 알 수 있었다. 동결속도에 따른 내부압력은 배, 사과 및 메론에 있어 침지식 방법에 의한 동결시 체적팽창 및 수축에 따른 내부압력 차가 가장 적게 나타났으며, 송풍식 동결에서 가장 크게 나타나 동결속도가 빠를수록 내압의 크기는 적다는 것을 알 수 있었으나 딸기 및 수박의 경우는 오히려 침지식에서 내압이 가장 크게 나타났다. 균온 처리하지 않은 동결에 있어 과일의 내부압력 변화는 약 2 psig수준인 반면에 균온 처리한 수박의 내부압력 변화는 균온 처리하지 않은 수박의 내부압력 변화 경향과 유사하지만 일정한 수준의 내압을 발생시킴으로써 내부압력의 크기도 약 1.3 psig수준으로 상당히 적게 나타났다. 또한, 해동시에 있어서도 균온처리한 시료의 내부압력 크기가 균온처리하지 않은 내부압력 크기보다 상대적으로 적게 나타났다. 균온처리 동결시, 다단계 처리보다는 3∼4회 수준의 일정한 균온 처리가 내부압력의 증감 폭을 줄일 수 있었다.

• Conservation Science in Museum
• /
• v.11
• /
• pp.49-52
• /
• 2010

A wooden Comb excavated at Shinchang-dong wetland site was treated with cetylalcohol as a reinforcing agent. The conservation process was done by freeze drying the wooden artifact after substituting it with no.3 butyl alcohol and impregnating with 40wt% cetylalcohol solution. Consequently there was no noticeable surface damage. Also it showed 54% of remaining weight and a shrinkage of length 3.3%, width 2.1% and thickness 3.1%. Therefore using cetylalcohol for conservation of waterlogged archeological wood was effective dimensional stability and remaining weight.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.285-286
• /
• 2020

본 논문은 농수축산물 및 도·소매 시장 자료를 통해 데이터베이스를 구축하여 시장별 상품의 가격, 장소, 기간 등의 정보를 일자별로 제공하는 시스템이다. 농수축산물의 경우, 크기, 신선도, 보관기간 등의 다양한 기준에 따라 가격이 형성되는데 상품 특성상 기상 변화와 계절 변화에 따른 생산량 및 상품의 질 차이가 매우 크기 때문에 상품의 공급량과 가격의 안정성을 보장하기 힘들다. 기존의 농수축산물 가격 제공 사례의 경우 정보 제공 범위가 좁아 정보의 유용성에 한계점이 존재하였다. 이를 보완하여 시장 위치와 제품 정보의 구체성 확보, 실시간 가격 정보 제공으로 정보의 폭을 넓혀 경제 주체에게 실질적으로 도움을 주고자 하였다. 이를 통해, 소비자들은 원하는 상품의 정보를 제공받아 가격, 거리, 품질 등의 주관적인 기준에 근거한 합리적 소비를 할 수 있다.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.17-30
• /
• 1978

Press drying was used on italian poplar (Populus euamericana) to find the profitable means of drying. This study was designed to investigate the process of platen drying considering core temperature, drying time, current moisture content, drying rate, shrinkage and recovery, and green volume specific gravity, equilibrium moisture content and dimensional stability of press dried material and air dried material, The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$. The results were summarized as follows. 1. Core temperature was divided into three stages of drying characterized by period initial heating, plateau temperature and rising core temperature. Plateau temperature was 114 to $119^{\circ}C$. 2. The following predicting equations of drying time(y) in different core temperatures were developed for initial thickness($x_1$), initial moisture content ($x_2$) and final moisture content ($x_3$) 3. The predicting equaltion of current moisture content(u) was log u=4.658-0.060t as funtion of drying time(t) and that of drying rate(r) was log r=-2.797-0.049t. Current moisture content and drying rate of air drying were shown in figure 2. 4. The predicting equation of shrinkage in thickness direction(y) was log y=1.933+0.038t as function of drying time(t), and that of expansion in width direction was $y=-0.692+0.043t-0.001t^2$. 5. Thickness shrinkage was increased more than proportional at to pressure increase. Width shrinkage and thickness recovery was greatest at 35psi. 6. Green volume specific gravity of press dried material was 25% greater than that of air dried material. But equilibrium moisture content of press dried material was less 24% than that of air dried material. Antishrinkage efficiency of press dried material were obtained 27.7%.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.281-286
• /
• 1999

Background: The purpose of this study is to analyze the types of complications, the incidences of complications, and preoperative and postoperative risk factors affecting the incidence of the complication. Material and Method: Between August 1990 and August 1997 in Asan Medical Center, 42 patients(24 men and 18 women) underwent surgical resection for pulmonary aspergilloma. The mean age was 46.6${\pm}$11.5 years(range 29 to 69 years). Hemoptysis(90%) was the most common presentation. Pulmonary tuberculosis was the most common predisposing cause(81%). The associated diseases were bronchiectasis(n=11), active puolmonary tuberculosis(n=9), diabetes mellitus(n=8), lung carcinoid(n=1), and acute myeloblastic leukemia(n=1). Lobectomy was done in 32 cases(76%), segmentectomy or wedge resection in 4, pneumonectomy in 2, and lobectomy combined with segmentectomy in 4. Result: Operative mortality was 2%. The most common postoperative complication was persistent air leakage(n=6). The variables such as age, sex, pulmonary function test, amount and duration of hemoptysis, associated diseases(diabetes mellitus, active pulmonary tuberculosis), mode of preoperative management(steroid, antifungal agent, bronchial arterial embolization), and modes of operative procedures were statistically insignificant. The radiologic extent of infiltration to normal lung parenchyme was statistically significant(p=0.04). Conclusion: We conclude that the extent of the infiltration to normal lung parenchyme in preoperative radiologic studies should be carefully evaluated to reduce the postoperative complications in surgery for pulmonary aspergilloma.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Korean journal of food and cookery science
• /
• v.17 no.5
• /
• pp.464-471
• /
• 2001

Physicochemical and sensory properties of Kakdugi prepared with spring cultivars of radish were compared during fermentation. Among 5 cultivars,` ‘Bagkwang’‘Chunhadaehyung’and ‘Bakbong’ were heavier in average weight and longer in length than others. Sugar content and hardness were the highest in ‘91144’and ‘Bakbong’, while moisture content, in ‘Bagkwang’ and ‘Bakbong’, During fermentation at 20$\^{C}$ for 11 days, a great decrease in pH and great increase of acidity were observed in five Kakdugi samples after day 2. The acidity of ‘Bagkwang’ and ‘Housebommoo’ increased rapidly after day 2 until day 5 and then reached around 1.04-1.08% (lactic acid) at day 11, while those of ‘91144’ and ‘Bakbong’ increased slowly until day 5, but after day 7 increased rapidly up to 1.2-1.3%(lactic acid). ‘91144’ showed the highest ‘a’ value(redness), but ‘Bagkwang’, the lowest. Decrease in hardness during fermentation was the least in ‘Bakbong’, while ‘Chunhadaehyung’, the greatest. The result of sensory evaluation suggested that ‘Bakbong’and ‘Housebommoo’ were the best among spring cultivars of radish for Kakdugi preparation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.1 s.20
• /
• pp.59-68
• /
• 2006

Flow separation of recirculation zone by increasing of flow and change of its direction at confluence results in backwater due to conveyance reduction. The hydraulic characteristics of flow separation are analysed by experimental results of flow ratios of tributary and main streams and approaching angles. The boundary of flow separation by dimensionless length and width is defined by the streamline of zero and this definition agrees well to the existing investigation. Because flow separation doesn't appear in small flow ratio and approaching angle of $30^{\circ}$, the equation of flow separation with flow ratio and approaching angle is provided. In flow separation consideration and comparing with previous results, the existing equations of dimensionless length and width ratios by function of approaching angle, flow ratio, and downstream Froude number are modified and also contraction coefficient and shape factor are analysed. Dimensionless length and width ratios are proportional to the flow ratio and approaching angle. In analysis of water surface profiles, the backwater effects are proportional to the flow ratio and approaching angle and the magnitude at outside wall is greater than that of inside wall of main stream. The length, $X_l$ from the beginning of confluence to downstream of uniform flow, where the depth is equal to uniform depth, is characterized by width of stream, flow ratio, approaching angle, and contraction coefficient. The ratios between maximum water depth by backwater and minimum depth at separation are analysed.