• Title/Summary/Keyword: 폭수축

Search Result 94, Processing Time 0.028 seconds

Efficient QRS Detection and PVC(Premature Ventricular Contraction) Classification based on Profiling Method (효율적인 QRS 검출과 프로파일링 기법을 통한 심실조기수축(PVC) 분류)

  • Cho, Ik-Sung;Kwon, Hyeog-Soong
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.3
    • /
    • pp.705-711
    • /
    • 2013
  • QRS detection of ECG is the most popular and easy way to detect cardiac-disease. But it is difficult to analyze the ECG signal because of various noise types. Also in the healthcare system that must continuously monitor people's situation, it is necessary to process ECG signal in realtime. In other words, the design of algorithm that exactly detects QRS wave using minimal computation and classifies PVC by analyzing the persons's physical condition and/or environment is needed. Thus, efficient QRS detection and PVC classification based on profiling method is presented in this paper. For this purpose, we detected QRS through the preprocessing method using morphological filter, adaptive threshold, and window. Also, we applied profiling method to classify each patient's normal cardiac behavior through hash function. The performance of R wave detection, normal beat and PVC classification is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.77% in R wave detection and the rate of 0.65% in normal beat classification error and 93.29% in PVC classification.

Studies on Wood Quality and Growth of Alnus glutinosa (L.) Gaertn. in Korea - Physical Properties - (글루티노사오리나무의 생장과 재질에 관한 연구 - 물리적 성질 -)

  • Han, Ju-Hwan;Jeong, Jae-Hun;Lee, Gooi-Yong;Kim, Byung-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • v.43 no.1
    • /
    • pp.1-8
    • /
    • 2015
  • Relationship between annual ring width and physical properties of 24-year old alder woods (Alnus glutinosa L.) that had different seed origins from four provenances such as Bulgary, Italy, United Kindom, and Yugoslavia was investigated. No difference among different origins of seeds was found for the moisture content, density, and shrinkage or tangential radial (T/R) ratio. These properties had also no relationship with the growth rate. As important parameters among wood quality indices, no difference in the density or shrinkage on wood that has different growth rates was detected among alder woods from four different origins of seeds. Therefore, it is considered that higher growth rate might be a key factor for selecting the seed origin of the alder tree.

Statistical Verification of Acoustic Emissions Detected during Polymerization Shrinkage of Resin Restoration in Dental Ring (치아/복합레진 수복부의 중합 수축시 검출된 음향방출의 통계적 검증)

  • Gu, Ja-Uk;Choi, Nak-Sam;Arakawa, Kazuo
    • Composites Research
    • /
    • v.23 no.6
    • /
    • pp.39-46
    • /
    • 2010
  • Acoustic emission (AE) signals are detected during the polymerization shrinkage of composite resin restoration in artificial dental ring according to various interfacial treatment conditions. AE amplitudes and the number of AE hit events were compared through the non-parametric statistics of Mann-Whitney method and Kruskal-Wallis method. The AE amplitudes detected from the PMMA and human tooth ring specimens were not significantly different according to adhesive conditions. The stainless steel ring specimen, meanwhile, had a difference in AE amplitude (p<0.05). The quantity of hit events for the human molar dentin specimens of the good bonding state was much less than that for the steel ring specimen but more than that for the PMMA ring specimen. For the same substrate, the better the bonding state, the less the AE hit events (p<0.05). The degree of marginal disintegration measured by SEM was proportional to the amount of AE hit events detected.

Change of isometric contractile force and muscle activity applying ice and hot according to the time on biceps brachii muscle (온열 및 한랭의 적용시간에 따른 상완이두근의 등척성 수축력과 근활성도 변화)

  • Lee, Joon-Hee;Jeon, Jae-Keun
    • Journal of Digital Convergence
    • /
    • v.10 no.11
    • /
    • pp.459-465
    • /
    • 2012
  • This study has investigated the effect of isometric contractile force and muscle activity applying ice and hot according to the time from the biceps brachii muscle. In this study, 20 university students participants without musculoskeletal and neurological disorders. By applying a hot pack 5 min, 10 min, 20 min and 30 min respectively and ice pack for 5 min, 10 min, and 20 min respectively. After that measurement are skin temperature, contractile force and muscle activity. Skin temperature of the hot and cold 5 min applied that rapidly changing. Increasing the time it takes to apply a variance has been reduced(p<.001). Isometric contractile force was not statistically significant but highest when applying the hot pack 5 minutes and lowest when applying the hot pack 30 minutes(p<.001). Muscle activity and median frequency was highest when applying the hot pack 5 minutes. To analyze the above results, it was found that isometric contractile force and muscle activity changed according to the applying time. These result lead us to the conclusion that this study will be more evidence for changes in muscle contraction to apply hot pack and ice pack on clinic.

A STUDY ON THE POLYMERIZATION SHRINKAGE OF COMPOSITE RESIN ACCORDING TO VARIOUS LIGHT-CURING METHODS (광조사 방법에 따른 복합레진의 중합수축에 관한 연구)

  • Kwon, Oh-Jin;Kim, Jong-Soo;Kwon, Soon-Won
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.30 no.1
    • /
    • pp.102-109
    • /
    • 2003
  • The purpose of this study was to evaluate the linear polymerization shrinkage(%) and microhardness of composite resin(Z-100, 3M, USA) according to 2-step light curing method. Conventional light curing unit(Curing Light 2500, 3M USA) and 2-step light curing unit(Elipar Highlight, ESPE, Germany) were used as light source. The strain gauge method was used for determination of polymerization shrinkage(%). Samples were divided by 3 groups according to light curing methods (Group I : $450mW/cm^2$, 40sec, Group II : $650mW/cm^2$, 40sec, Group III : $150mW/cm^2$, 10sec & $650mW/cm^2$, 30sec). Preparations of acrylic molds were followed by filling and curing. Strain gauges attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Ore-way ANOVA and/or Scheffe test. The results of the present study can be summarized as follows: 1. Composite resin in acrylic molds showed the initial expansion at the early phase of polymerization. This was followed by the contraction with the rapid increase in volume during the first 60 seconds and gradually diminished as curing process continued. 2. The lowest linear polymerization shrinkage(%) was found in group III followed by group I, II during the measuring periods. 3. Group III using 2-step curing method showed statistically significant reduction of linear polymerization shrinkage(%) compared with group I, II at 1 minute and 10 minutes from light irradiation(p<0.05). 4. The microhardness values of each group not revealed significant difference.

  • PDF

Semi-Empirical Prediction of Crack Width of the Strengthened Bridge Deck with External Bonding Plastic (외부부착 보강된 교량 바닥판 균열폭의 반경험적인 예측)

  • 심종성;오홍섭
    • Journal of the Korea Concrete Institute
    • /
    • v.14 no.2
    • /
    • pp.231-238
    • /
    • 2002
  • Dry shrinkage md temperature change cause to develope concrete bridge decks on main girders have initial unidirectional cracks in longitudinal or transverse direction. As they receive traffic loads, the crack gradually propagate in different directions depending on the concrete dimension and reinforcement ratio. Since existing equations that predict crack width are mostly based on the one directional bond-slip theory, it is difficult to determine the actual crack width of a bridge deck with varying the spacing of rebar or strengthening material and to estimate the improvement rate in serviceability of the strengthened bridge deck. In this study, crack propagation mechanism is identified based on the test results and a new crack prediction equation is proposed for evaluation of serviceability. Although more accurate results are derived using the proposed equation, the extent of error is increased as the strain of the rebar or the strengthening material increases after the yielding of rebar Therefore, further research is required to better predict the crack width after the rebar yields under fatigue loading condition.

Study on the Short-Term Hemodynamic Effects of Experimental Cardiomyoplasty in Heart Failure Model (심부전 모델에서 실험적 심근성형술의 단기 혈역학적 효과에 관한 연구)

  • Jeong, Yoon-Seop;Youm, Wook;Lee, Chang-Ha;Kim, Wook-Seong;Lee, Young-Tak;Kim, Won-Gon
    • Journal of Chest Surgery
    • /
    • v.32 no.3
    • /
    • pp.224-236
    • /
    • 1999
  • Background: To evaluate the short-term effect of dynamic cardiomyoplasty on circulatory function and detect the related factors that can affect it, experimental cardiomyoplasties were performed under the state of normal cardiac function and heart failure. Material and Method: A total of 10 mongrel dogs weighing 20 to 30kg were divided arbitrarily into two groups. Five dogs of group A underwent cardiomyoplasty with latissimus dorsi(LD) muscle mobilization followed by a 2-week vascular delay and 6-week muscle training. Then, hemodynamic studies were conducted. In group B, doxorubicin was given to 5 dogs in an IV dose of 1 mg/kg once a week for 8 weeks to induce chronic heart failure, and simultaneous muscle training was given for preconditioning during this period. Then, cardiomyoplasties were performed and hemodynamic studies were conducted immediately after these cardiomyoplasties in group B. Result: In group A, under the state of normal cardiac function, only mean right atrial pressure significantly increased with the pacer-on(p<0.05) and the left ventricular hemodynamic parameters did not change significantly. However, with pacer-on in group B, cardiac output(CO), rate of left ventricular pressure development(dp/dt), stroke volume(SV), and left ventricular stroke work(SW) increased by 16.7${\pm}$7.2%, 9.3${\pm}$3.2%, 16.8${\pm}$8.6%, and 23.1${\pm}$9.7%, respectively, whereas left ventricular end-diastole pressure(LVEDP) and mean pulmonary capillary wedge pressure(mPCWP) decreased by 32.1${\pm}$4.6% and 17.7${\pm}$9.1%, respectively(p<0.05). In group A, imipramine was infused at the rate of 7.5mg/kg/hour for 34${\pm}$2.6 minutes to induce acute heart failure, which resulted in the reduction of cardiac output by 17.5${\pm}$2.7%, systolic left ventricular pressure by 15.8${\pm}$2.5% and the elevation of left ventricular end-diastole pressure by 54.3${\pm}$15.2%(p<0.05). With pacer-on under this state of acute heart failu e, CO, dp/dt, SV, and SW increased by 4.5${\pm}$1.8% and 3.1${\pm}$1.1%, 5.7${\pm}$3.6%, and 6.9${\pm}$4.4%, respectively, whereas LVEDP decreased by 11.7${\pm}$4.7%(p<0.05). Comparing CO, dp/dt, SV, SW and LVEDP that changed significantly with pacer-on, both under the state of acute and chronic heart failure, augmentation widths of these left ventricular hemodynamic parameters were significantly larger under the state of chronic heart failure(group B) than acute heart failure(group A)(p<0.05). On gross inspection, variable degrees of adhesion and inflammation were present in all 5 dogs of group A, including 2 dogs that showed no muscle contraction. No adhesion and inflammation were, however, present in all 5 dogs of group B, which showed vivid muscle contractions. Considering these differences in gross findings along with the following premise that the acute heart failure state was not statistically different from the chronic one in terms of left ventricular parameters(p>0.05), the larger augmentation effect seen in group B is presumed to be mainly attributed to the viability and contractility of the LD muscle. Conclusion: These results indicate that the positive circulatory augmentation effect of cardiomyoplasty is apparent only under the state of heart failure and the preservation of muscle contractility is important to maximize this effect.

  • PDF

Effects of Mold Temperature on the Weldline and Dimensional Stability of Injection-molded Parts (금형온도가 사출성형품의 웰드라인과 치수안정성에 미치는 영향에 관한 연구)

  • 김동학;이재원;김태완
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.4 no.3
    • /
    • pp.172-176
    • /
    • 2003
  • In this paper, we studied the effects of mold temperature on the microstructure of injection molded parts. The weld line decreases in length and width as mold temperature increases. We investigated the dimensional stability of the parts made of two kinds of resin(polypropylene and polystyrene) by varying the mold temperature. As the mold temperature is high, both the shrinkage ratio and the thickness difference for the PS parts decreases. But the observation of PP parts shows a tendency to increase. The easiness of cavity filling and transcription of the mold texture is improved as the mold temperature is high.

  • PDF

Analysis of Land Subsidence and Microwave Penetration on Drying Mudflat by using a Polarimetric Scatterometer Experiment (다편광 산란계 실험을 통한 개펄 건조시의 지반 침하와 마이크로파 침투 분석)

  • Lee Hoon-Yol;Chae Hee-Sam;Cho Seong-Jun
    • Proceedings of the KSRS Conference
    • /
    • 2006.03a
    • /
    • pp.145-148
    • /
    • 2006
  • 새로 조성된 간척지 갯벌이 건조 수축하면 지반 침하와 더불어 토양 내로의 마이크로파의 침투 깊이가 증가한다 따라서 인공위성 DInSAR를 이용하여 지반 침하량을 구하고자 할 때, 건조 시 동시에 발생하는 마이크로파의 개펄 침투 현상을 규명하여 보정해 주어야 한다. 이를 위하여 다편광 산란계(Polarimetric Scatterometer)를 구성하여 건조 개펄에 대한 실내실험을 실시하였다. PolScat의 구성은 5.0-5.6GHz 대역의 dual-polarization square horn antenna를 사용하였으며 Agilent 8753ES 벡터 네트워크 분석기를 사용하였다. 길이 2m, 폭 2m, 높이 20cm의 개펄 샘플을 약 6주 동안 실내에서 건조시켜 위상을 측정한 결과 지반 침하와 함께 약 4mm의 마이크로파 투과현상이 발견되었다. 따라서 인공위성 DInSAR 지반침하량 계산에 있어서 반드시 토양 수분에 따른 마이크로파의 토양 침투 깊이를 보정해 주어야 함이 밝혀졌다.

  • PDF

A Study on Comfort and Antimicrobial Properties of Sports Socks (Part II) -focused on antimicrobial, and shape-retention properties during wear and care- (스포츠 양말의 쾌적성과 항균성에 관한 연구 (제2보) -착용과 관리시에 항균성 밑 형태안정성을 중심으로-)

  • 박명자;김칠순;남영미;임정호
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1998.11a
    • /
    • pp.256-260
    • /
    • 1998
  • 1스포츠 양말의 쾌적성과 항균성에 영향을 주는 인자 중에서 특히 양말의 항균성은 위생적인 쾌적감에 중요한 요소이고, 반복되는 착용과 관리도중 에 발생하는 양말의 형태변화는 착용자의 Fit감에 영향을 준다. 본 연구에서는 20종류의 양말시료를 섬유종류, 실의 굵기, 편성조직, 가공처리를 실험조건에 맞게 고려하여 직접 편성하거나 구입하여 사용하였다. 항균가공된 시판 양말의 항균성과 내세탁성, 양말의 착용과 관리 중에 문제가 되는 형태안정성에 관한 실험결과로서 얻은 결론은 다음과 같다. 1. 시판되는 항균가공양말의 항균성과 내세탁성은 모든 시료에서 매우 우수하게 나타나, 위생적인 의생활을 원하는 소비자들의 쾌적감을 충족시킬 수 있다. 2. 양말의 착용 중 또는 관리 중에 형태안정성을 결과를 보면, 섬유의 종류 편성조직에 영향을 받는데, 특히 면양말의 제작 시에는 착용 중에 발생하는 폭방향의 이완현상과 관리 중에 발생하는 길이수축현상을 고려하여 부위별 크기를 조절해야, Fit 감을 유지하며 이수축에 의한 문제발생을 줄일 수 있다.

  • PDF