Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Statistical Verification of Acoustic Emissions Detected during Polymerization Shrinkage of Resin Restoration in Dental Ring

치아/복합레진 수복부의 중합 수축시 검출된 음향방출의 통계적 검증

  • 구자욱 (한양대학교 기계공학과 대학원) ;
  • 최낙삼 (한양대학교 기계공학과) ;
  • Published : 2010.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Acoustic emission (AE) signals are detected during the polymerization shrinkage of composite resin restoration in artificial dental ring according to various interfacial treatment conditions. AE amplitudes and the number of AE hit events were compared through the non-parametric statistics of Mann-Whitney method and Kruskal-Wallis method. The AE amplitudes detected from the PMMA and human tooth ring specimens were not significantly different according to adhesive conditions. The stainless steel ring specimen, meanwhile, had a difference in AE amplitude (p<0.05). The quantity of hit events for the human molar dentin specimens of the good bonding state was much less than that for the steel ring specimen but more than that for the PMMA ring specimen. For the same substrate, the better the bonding state, the less the AE hit events (p<0.05). The degree of marginal disintegration measured by SEM was proportional to the amount of AE hit events detected.

치아의 와동에 수복된 치과용 복합레진을 광(LED) 조사를 통해 정화 수축시키면서 음향방출(acoustic emission, AE) 신호를 검출하였다. 비모수 통계법인 Mann-Whitney법과 Kruskal-Wallis법을 이용하여 시편의 재질과 계면의 접착조건에 따른 AE hit event 수와 최대진폭을 비교 평가하였다. PMMA와 치아시편으로부터 검출된 선호의 최대진폭은 정착조건에 따른 차이가 없었지만 스테인리스 시편으로부터 검출된 신호는 접착조건에 따라 최대 진폭의 차이가 있었다(p<0.05). AE hit event 수는 양호한 접착조건에서 시편의 재질에 따라 차이가 있었고(p<0.05), 세가지 재질의 시편 모두 접착조건이 양호한 실험에서 AE 신호가 적게 검출되었다. SEM을 이용하여 계면에 생성된 캡을 측정한 결과 AE가 많이 검출되고 검출된 신호의 최대 진폭이 큰 시편에서 갱의 폭이 넓고 형성 비율이 높았다.

Keywords

References

  1. Bausch JR de Lange K, Davidson CL., "Clinical significance of polymerization shrinkage of composite resins". Journal of Prosthetic Dentistry, Vol. 48, issue 1, 1982, pp. 59-67. https://doi.org/10.1016/0022-3913(82)90048-8
  2. KleverlaanCJ, FeilzerAJ "Polymerization shrinkage and contraction stress of dental resin composites", Dental Materials, Vol. 21, issue 12, 2005, pp. 1150-1157. https://doi.org/10.1016/j.dental.2005.02.004
  3. Ilie N, Kunzelmann KH, Hickel R, "Evaluation of microtensile bond strengths of composite materials in comparison to their polymerization shrinkage", Dental Materials, Vol. 22, issue 7, 2006, pp. 593-601. https://doi.org/10.1016/j.dental.2005.05.014
  4. H. Sano, T. Shono, H. Sonoda, T. Takatsu, Bernard Ciucchi, Ricardo Carvalho, David H. Pashley., "Relationship between stuface area for adhesion and tensile bond strength-Evaluation of a micro-tensile bond test," Dental Materials, Vol. 10 (4), 1994, pp. 236-240. https://doi.org/10.1016/0109-5641(94)90067-1
  5. T. Takemori, H. Chigira, K. Itoh, H. Hisamitsu, "Factors affecting tensile bond strength of composite to dentin," Dental Materials. Vol. 9 (2), 1993, pp. 136-138. https://doi.org/10.1016/0109-5641(93)90090-D
  6. Krejci I, Besek M, Lutz F, "Clinical and SEM study of Tetric resin composite in posterior teeth: 12-month results", American journal of Dentistry, Vol. 7 (1), 1999, pp. 27-30.
  7. Tay F, Pang KM, Gwinnett AJ, Wei SH, "A method for microleakage evaluation along the dentin/restorative interface", American Journal of Dentistry, Vol. 8, 1995, pp. 105-108.
  8. Bedran de Castro AK, Pimenta LA, Amaral CM, Ambrosano GM, "Evaluation of microleakage in cervical margins of various posterior restorative systems", Journal of Esthetic and Restorative Dentistry, Vol. 14, 2002, pp. 107-114. https://doi.org/10.1111/j.1708-8240.2002.tb00159.x
  9. 구자욱, 최낙삼, Kazuo Arakawa, "음향방출법을 이용한 치아/복합레진 수복재의 계면부 파괴해석," 한국복합재료학회지, 제22권 제6호, 2009, pp. 45-51.
  10. Mann H.B., Whitney D. R., "On a test of whether one of two random variables is stochastically larger than the other", Annals of Mathematical Statistics, Vol. 18, 1947, pp. 50-60. https://doi.org/10.1214/aoms/1177730491
  11. William H. Kruskal, W. Allen Wallis, "Use of ranks in one-criterion variance analysis", Journal of the American statistical association, Vol. 47 (260), 1952, pp. 583-621. https://doi.org/10.2307/2280779
  12. Nak-Sam Choi, Sung-Choong Woo, Kyong-Yop Rhee, "Effect of fiber orientation on the acoustic emission and fracture characteristics of composite laminates", Journal of Materials Science, Vol. 42, 2007, pp. 1162-1168. https://doi.org/10.1007/s10853-006-1445-1

Cited by

  1. A Study on the Structural Design of Effective Composite Joint and Light Weight in Body Floor vol.21, pp.6, 2012, https://doi.org/10.7735/ksmte.2012.21.6.920
  2. 치아 와동의 복합레진 수복시 음향방출의 시간적 발생 특성 vol.35, pp.2, 2011, https://doi.org/10.3795/ksme-a.2011.35.2.169