• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.89-96
• /
• 2015

This paper presents a high efficiency, PSM/DCM/CCM triple mode boost DC-DC converter for mobile application. This device operates at Pulse-Skipping Mode(PSM) when it enters light load, and otherwise operate the operating frequency of 1.4MHz with Pulse-Width Modulation(PWM) mode. Especially in order to improve the efficiency during the Discontinuous-Conduction Mode(DCM) operation period, the reverse current prevention circuit and oscillations caused by the inductor and the parasitic capacitor to prevent the Ringing killer circuit is added. The input voltage of the boost converter ranges from 2.5V ~ 4.2V and it generates the output of 4.8V. The measurement results show that the boost converter provides a peak efficiency of 92% on CCM and 87% on DCM. And an efficiency-improving PWM operation raises the efficiency drop because of transition from PWM to PFM. The converter has been fabricated with a 0.18um Dongbu BCDMOS technology.

• The Korean Journal of Financial Management
• /
• v.20 no.1
• /
• pp.261-277
• /
• 2003

The Korean Stock Market Surveillance System is desinged to control the volatility of stocks by drawing investor's attention and suppressing disguised demand, when stocks run up so rapidly in short period of time. Yet the Surveillance System has not been under empirical examination about its role and evolved in line with the Price Limit System. This study looks at the security returns under surveillance designation for 1995 -2001 period. The results indicate that the volatility of stocks has not been affected after surveillance designation. The constraints against the disguised demand, however, seems to limit the security returns rather than volatilities. These findings raises a question about the role of The Korean Stock Market Surveillance System for the control of volatility. The Surveillance System needs to be examined thoroughly about its role, function, and its conditions. Otherwise, the shareholders with less information could be placed at a disadvantage. This paper suggests that the system should be amended in an effort to make the volatility of stocks under control.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.921-932
• /
• 2010

This paper presents a dual-band array antenna based on a modified Sierpinski fractal structure. Array structure is mirror symmetric, and forms broadside radiation pattern for dual frequency band if the ports are fed with $180^{\circ}C$ phase difference between upper and lower $2{\times}1$ array. To use in-phase corporate feeding circuit, the phase inversion structure is designed by changing the position of patch and ground for upper and lower array. The dimensions of the array antenna is $28{\times}30{\times}5\;cm^3$ and the bandwidth of 855~1,380 MHz(47 %), 1,770~2,330 MHz(27 %) were achieved for -10 dB return loss. The measured gain is 9.06~12.44 dBi for the first band and 11.76~14.84 dBi for the second band. The half power beam width is $57^{\circ}$ for x-z plane and $46^{\circ}$ for y-z plane at 1,100 MHz and $43^{\circ}$ and $28^{\circ}$ at 2,050 MHz, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.836-840
• /
• 2007

Large-Scale Particle Image Velocimetry (LSPIV)는 Particle Image Velocimetry (PIV)를 자연하천이나 실험실에서 넓은 영역($4m^2{\sim}45,000m^2$)에 적용할 수 있도록 확장시킨 것으로 지난 10여년 이상 세계적으로 널리 이에 대한 연구가 진행되고 있다. PIV는 seeding, illumination, recording 그리고 image processing으로 구성된다. LSPIV(Large Scale PIV)는 PIV의 기본원리를 근거로 하여 기존의 PIV에 비하여 실험실 내에서의 수리모형실험이나 일반 하천에서의 유속측정과 같은 큰 규모의 흐름해석을 할 수 있도록 seeding, illumination에 대한 조정이 필요하고, 촬영된 image에 대한 왜곡을 없애는 작업이 필요하다. LSPIV는 PIV의 네가지 단계를 포함하여 seeding, illumination, recording, image transformation, image processing 및 post-processing의 여섯 단계로 구성되어진다 (Li, 2002). LSPIV를 일반 하천에 적용시, 자연발생적인 tracers - 난류로 인한 표면 교란, 부유물, 수공구조물로 인해서 발생하는 자연 발생되는 거품 - 가 풍부해서 seeding이 불필요한 경우를 제외하고는 정확한 유속장의 해석을 위하여 인공적인 seeding을 필요로 한다. 일반적으로 Seeding 재료로 많이 이용되는 것은 wood mulch, Ecofoam, grain-straw 등이다. 하천에서 자연발생적 혹은 인위적 seeding을 하였을 때 이들 tracers의 물리적인 속성으로 바람에 쉽게 영향을 받고 이로 인하여 실제의 물표면유속을 대표하지 못하는 경우가 있다. 이에 실험실의 개수로에서 여러 가지 이용 가능한 tracers에 대하여 바람에 의한 오차 발생의 정도를 조사하였다. 실험에 사용된 seeding 재료로는 black polypropylene, Ecofoam, white polystyrene의 세가지를 이용하였다. black polypropylene (SG=0.92)과 white polystyrene (SG=0.0125)은 폭 1 m 이내의 개수로 실험 장치에서 유속장의 해석에 많이 이용되고 Ecofoam (SG=0.0065)은 수리 모형실험에서 많이 이용된다. seeding 물질에 따른 바람의 영향을 분석하기 위해서 폭 60cm의 개수로에서 seeding 물질을 변경하면서 펌프의 조작에 의해 3가지 단면평균유속을 발생시키고, 각 평균유속조건에 대해 4가지의 바람세기 - 바람이 없을 때와 팬의 바람세기를 1단, 2단, 3단으로 조정 - 를 발생시켰으며, 개수로위에서 촬영한 이미지의 상류측기준점으로부터 0.3556m 하류 지점을 횡단하는 단면의 표면유속을 측정하여 비교하였고, 그 단면의 중앙에서 물표면 바로 위 지점의 풍속을 측정하였다. 각 Seeding 물질에 대해 팬을 켜지 않았을 때, 즉 바람의 영향이 없을 때 측정한 표면유속을 바람의 세기가 변한 경우의 기준 표면유속으로 이용하였다. 본 연구의 결과 비중이 0.01 내외인 Ecofoam과 white polystyrene에 비해 비중이 0.92인 black polypropylene은 대부분이 물속에 잠겨 있어 흐름과 거의 일치하여 움직임을 알 수 있었다. 또한 흐름의 평균유속이 0.165 m/s의 저유속에서 바람이 tracers에 미치는 영향이 평균유속 0.558m/s인 경우보다 커서, 바람의 세기의 증가에 따라 표면유속 측정값이 급속히 감소되었다. 흐름의 평균유속이 큰 경우에는 바람이 tracer에 마치는 영향이 현격히 줄어듬을 보이고 있다. 결론적으로 유속이 증가함에 따라 바람의 영향은 감소하나, 바람의 영향을 최소화시키기 위해서는 가급적 비중이 큰 물질(0.5

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.855-860
• /
• 2011

We numerically simulated a dissolved air flotation (DAF) tank to predict the performance of the pilot facility. The flow was assumed to be two-dimensional and two-phase. The velocity distributions in the separation zones of differently shaped DAFs were compared to find the effect of the shape on the performance. The results showed that the typical flow pattern that appeared in a well-designed DAF-tank was generated in the separation zone of the base model. This flow pattern could be maintained while the baffle height was sufficiently tall regardless of the other geometric parameters. However, the baffle height and angle, the contact zone width, and the perforated plate affected the uniformity of the downward flow in the separation zone. Except for the baffle height, the base model used in this study showed a better uniformity of downward flow than did other models with different geometric parameters.

• Journal of Technology Innovation
• /
• v.23 no.4
• /
• pp.245-287
• /
• 2015

Architectural innovation is being regarded as one having major influence on the rate of performance improvement, even if this type of innovation does not show the highest level of technological discontinuity. Radical innovation firms who made a breakthrough product new to an industry, approach a certain point of time in which the speed of performance improvement very slows down, if architectural efficiency is not improved. At this time, this firm's prior experience in developing inferior, but very creative radical product architecture might work as paradoxical impediments to architectural innovation, the following important event. This study intends to understand the relationship between shifts in market needs and technological problem solving strategy, which exist before. after, and during architectural innovation, based on conceptual framework in which both stage and problem solving perspectives are combined. Korean SME, JAHWA Electronics could succeed in diffusion of vibration motor, by overcoming technological mental model locked in seemingly successful first generation architecture of coin type vibration motor. In-depth single case study including interviews and active participative observations was carried out for building longitudinal understanding of this innovation concept.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.165-169
• /
• 2004

In Magnetic Resonance Electrical Impedance Tomography (MREIT), we inject current through electrodes placed on the surface of a subject and measure the induced magnetic flux density distribution using an MRI scanner. This requires a constant current source whose output pulses are synchronized with MR pulse sequences. In this paper, we present a design and performance analysis of a current source used in a 3.0T MREIT system. The developed current source was tested using a saline phantom. We found that its performance is satisfactory for the current MREIT system. We suggest future improvements for better SNR(signal-to-noise ratio).

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.82-91
• /
• 2018

This study analyzed the working conditions and problems of screen fire shutters in the Goyang Bus Terminal fire based on the fire investigation results. At that time, screen fire shutters in the 1st basement, which was under construction, did not work because the power was shut off. Four screen fire shutters in the 1st and 3rd floor did not work despite the power not being shut off. The following problems related to a screen fire shutter were found: shutting off the power to screen fire shutters for the fire compartment on each floor, even when the fire compartments were changed in each area; installing an integral type screen fire shutter without any regulations, installing a two-stage screen fire shutter in a place not related to obstacles during evacuation; stopping the function of the screen fire shutters for a fire compartment on each floor after a combustible sandwich panel was comparted; installing a screen fire shutter over 10 meters in width, in which its performance was not verified; and no safety control standards for reinstalling or maintaining a screen fire shutter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.77-83
• /
• 2010

This paper presents the dual resonance PIFA(Planar Inverted F-Antenna) which satisfies the requirements of the 802.11n standard at both 2.4 GHz and 5 GHz frequency bands. Patch for 2.4 GHz and U-Type slot for 5 GHz were used for dual resonance, respectively. In this paper, the characteristics of an antenna were investigated by varying locations of short plate and feed point, the width of the short plate, the thickness and the location of U-Type slot. To investigate the characteristics of the PIFA, HFSS(High Frequency Structure Simulation) for the simulation was used. And the measurement results of a fabricated PIFA were compared with the simulated ones. The measurement and simulation results show that good dual resonance characteristics as the thickness of U-type slot decreases and when the location of U-type slot is far from the feed point.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2251-2257
• /
• 2006

We fabricated ZnO thin film successfully by using RF magnetron sputtering and investigated its potential for being utilized as the key material of piezoelectric device with the characterization of ZnO thin film such as such as crystallinity, surface morphology, c-axis orientation, film density. In thin study, $Ar/O_2$ gas ratio is fixed 70/30, RF power 125W, working pressure 8mTorr, distance between substrate and target 70mm, but the substrate temperature is varied from room temperature to $400^{\circ}C$. The relative intensity ($I_{(002)}/I_{(100)}$) or (002) peak in ZnO thin film deposited at $300^{\circ}$ was exhibited as 94%, then its FWHM was $0.571^{\circ}C$. Also, from the surface morphology evaluated by SEM and AFM, the film deposited at $300^{\circ}C$ showed uniform particle shape and excellent surface roughness of 4.08 m. The tendency of ZnO thin film density was exhibited to be denser with increasing substrate temperature but slightly decreased at near $400^{\circ}C$.