• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.13-25
• /
• 1997

전 세계의 대형 저속 디젤 엔진을 설계.제작하는 회사는 1980년대에 들어오면서 MAN - B&W, SULZER, MITSUBISHI의 3파전 양상을 띠고 있으며, 세계 시장점유율에서는 MAN - B&W가 50%이상을 차지하고 있다. 한국은 현재 한국중공업, 현대중공업, 쌍용중공업 및 삼성중공업에서 대형 저속 디젤 엔진을 생산하고 있다. 국내에서 생산되고 있는 대형 저속 디젤 엔진은 대부분이 MAN - B&W형이고 SULZER형이 약 20%를 차지하고 있다. 기술력은 위의 3사에 거의 의존하고 있으며, 설계보다는 생산에 치중하고 있는 실정이다. 선박용 엔진 구조물은 베드 플레이드(bed plate), 실린더 프레임(cylinder frame), 프레임 박스(frame box)등이 주 스테이 볼트(long stay bolt)에 의하여 체결되어 한 개의 대형 수직 구조물을 이루고 있으며, 프레임 박스의 안내면(guide plate)과 베드 플레이트의 베어링 지지부(bearing support)등은 엔진의 폭발력과 선박의 추진력을 직접적으로 받으므로 구조적 결함과 하자 보수의 문제들이 발생하고 있다. 이와 같은 사용상 및 제작상의 제문제를 해결하기 위해서는 유한요소 구조 해석 능력을 자체 보유하여 구조 설계상의 문제점을 분석하고 엔진 구조물의 취약 부위를 집중 검토하여야하며, 이를 통해 선박의 운항 중에 일어날 수 있는 사고를 미연에 방지할 수 있다. 그러나 국내에서는 이러한 대형 엔진 구조물의 설계/해석 기술이 거의 없고 구조적 문제점이 발생할 경우에는 모든 사항을 설계사(licensor)에 전적으로 의존하고 있는 실정이다. 한편, 설계 기술을 보유하고 있는 MAN - B&W, NEW SULZER DIESEL사 등은 정밀 구조 해석을 통하여 기존 엔진 구조물에 대한 안전성 및 신뢰성을 높임과 동시에 신 모델 개발에 박차를 가하고 있으나, 기술 이전은 회피하고 있어 대형 엔진 구조물에 대한 구조 해석 기술의 개발이 시급하다고 할 수 있다. 본 해설에서는 CAD/CAE(Computer Aided Design/Computer Aided Engineering)를 이용하여 위에서 제시된 대형 엔진 구조물의 구조해석 절차와 방법에 대해 간략히 설명하고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1081-1089
• /
• 2005

In order to examine the application feasibility of Orimulsion fuel in a commercial boiler using heavy fuel oil, a numerical and experimental research efforts have been made especially to figure out the fundamental combustion characteristics of this fuel in a small-scale boiler. One of the notable combustion features of Orimulsion fuel is the delayed appearance of flame location with the flame shape of rather broad distribution, which is found experimentally and confirmed by numerical calculation. This kind of flame characteristics is considered due to the high moisture content included inherently in the process of Orimulsion manufacture together with micro-explosion by the existence of fine water droplets. In order to investigate the effect on the combustion characteristics of Orimulsion, a series of parametric investigation have been made in terms of important design and operational variables such as injected amount of fuel, types of atomization fluid, and phonemenological radiation model employed in the calculation, etc. The delayed feature of peak flame can be alleviated by the adjustment of the flow rate of injected fuel and the generating features of CO, $SO_2$ and NO gases are also evaluated in the boiler. When the steam injection as atomizing fluid is used, the combustion process is stabilized with the reduced region of high flame temperature. In general, the calculation results are physically acceptable and consistent but some refinements of phenomenological models are necessary for the better resolution of pollutant formation. From the results of this small-scale Orimulsion boiler, it is believed that a number of useful information are obtained with the working computer program for the near future application of Orimulsion fuel to a conventional boiler.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.610-619
• /
• 2022

Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.163-170
• /
• 2005

According to the KSLV program of KARI, it is planed to develop various launch vehicle and satellite 10 years hereafter. Large-scale test facilities, such as ReTF and PTA-II, are needed to fulfill this launch vehicle/satellite development project. The authors intend to arrange and describe various indexes that are needed in test facility design, construction and operation process. This technical paper is describing model analysis of damage prediction of accident in KSLV Integrated Propulsion System Test Facility based on propellant storage quantity and layout. In addition, the result can be used to produce safer design of test facility.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.87-94
• /
• 1992

Film boiling heat transfer characteristics in liquid-liquid systems are studied experimentally. Liquid gallium as a heating liquid, n-pentane, freon-113, and ethanol are used as boiling liquids. In gallium-n-pentane and gallium-freon-113 systems the minimum film boiling point occurred at higher temperature than those observed in copper-boiling liquid systems. However MFB point occurred almost at the same temperature for the case of ethanol. This difference are due to the effects of contact angle and interfacial agitations in gallium-boiling liquid systems. Film boiling heat transfer rate, for the gallium-boiling liquid systems considered in this work, found to be approximately 10% higher than those in copper-boiling liquid systems, whose main cause is believed to be gallium-boiling liquid interfacial agitations affected by the density ratio between gallium and boiling liquid.

• Explosives and Blasting
• /
• v.34 no.2
• /
• pp.31-38
• /
• 2016

The hydrodynamics code is a numerical tool developed for modeling high velocity impacts where the materials are assumed to behave like fluids. The hydrodynamics code is widely used for solving impact problems, such as rock blasting using explosives. For a realistic simulation of rock blasting, it is necessary to model explosives numerically so that the interaction problem between rock and explosives can be solved in a fully coupled manner. The equation of state of explosives, which describes the state of the material under given physical conditions, should be established. In this paper, we introduced the hydrodynamics code used for explosion process modeling, the equation of state of explosives, and the determination of associated parameters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.402-410
• /
• 2008

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis. The FE model of the heavy duty diesel engine main parts consisting with four half cylinder was selected. The heavy duty diesel engine parts includes with cylinder block, cylinder head, gasket, liner, bearing cap, bearing and bolts. The loading conditions of engine were pre-fit load, assembly load, and gas load. As the results of structural analysis, because the stress values of cylinder block and bearing cap did not exceed the basic design can be satisfied. But on the part which contacts with cylinder block and bearing cap the stress value exceeds the allowable strength of material. In order to decrease the stress at that part, it was optimized with parametric study.

• Nuclear industry
• /
• v.20 no.6 s.208
• /
• pp.31-44
• /
• 2000

본 연구에서 액체금속로의 노심용융(core meltdown)으로 인한 초 즉발 임계(super-prompt critical)의 출력 폭주 사고시, 노심의 반응도 및 열수력 특성 변화와 에너지 방출량등을 계산하기 위하여, Bethe-Tait 방버론을 수정, 보완한 분석 모델이 개발되었다. 주요 보완 내용으로서는, 금속 연료 노심의 단상 액체 영역에서의 선형의(Linear) threshold 형태의 상태 방정식뿐만 아니라 포화 증기(saturated fuel vapor) 영역에서의 상태 방정식이 개발되었고, 이에 따른 노심 붕괴 반응도(disassembly reactivity)의 분석 모델이 개발되었다. 또한 도플러 반응도 효과를 고려하기 위한 분석모델도 아울러 개발되었다. 상기 보완 모델을 실행할 수 있는 수치 해석 프로그램이 개발되었고, 이를 활용하여 KALIMER에서 HCDA가 발생하였을 경우 노심에서의 에너지 방출량 계산이 수행되었다. 분석결과 도플러 효과와 포화 증기 영역에서의 압력 증가 및 노심팽창의 중요성이 확인되었다. 도플러 효과가 고려되지 않을 경우 HCDA는 분석된 모든 반응도 삽입률에 대하여 폭발적인 에너지 방출과 함께 사고가 종결되는 것으로 평가되었다. 그러나 도플러 상수가 최적 평가치인 -0.002인 경우 50$/s이하의 반응도 삽입률에서는 노심은 비등점(0.8KJ/g)에 도달치 않았으며, 설계 기준 사고인 100$/s의 경우에도 노심은 포화 증기 영역에 머물고 압력이 급격히 증가하는 단상(single phase)액체 영역의 threshold 값에 미치지 않기 때문에 사고는 핵연료 증기(vapor)의 점진적인 분산과 함께 종결되는 것으로 분석되며, 총 에너지 발생량은 약 1,800MJ로서 기계적 손상 에너지로 전환되는 분율을 고려할 때 KALIMER 원자로 용기의 구조 설계 기준치에 비해 상당한 여유도를 갖는 것으로 평가되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.279-287
• /
• 2018

This study investigated applicability of the fast running model for damage assessment of underground structures by ground shock. For this reason, the fast running model that consists of two main models such as the ground shock generation and propagation model and the underground structural damage assessment model was developed. The ground shock generation and propagation model was programed using theoretical formula and empirical formula introduced in TM5-855-1(US army manual). The single degree of freedom model of structural components was utilized to predict structural dynamic displacements which are used as index to assess damage level of components. In order to confirm the feasibility of the developed fast running model, underground structural dynamic displacements estimated from the fast running model were compared to displacements obtained from the finite element analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.657-658
• /
• 2006

Although there are many numerical models to simulate fs laser ablation of metals, no model can analyze the ablation phenomena over a wide range of fluence. In this work, a numerical code for simulating the fs laser ablation phenomena of metals has been developed. The two temperature model is employed to predict the ablation rate and the crater shape of metals using phase explosion mechanism in the relatively high fluence regime. Also, the ultrashort thermoelastic model is used for the low fluence regime to account for spallation of the sample by high strain rate. It has been demonstrated that the thermoelastic stress generated within the sample can exceed the yield stress of the material even near the threshold fluence. Numerical computation results are compared with the experiment for Cu and Ni and show good agreement. Discussions are made on the hydrodynamic model considering phase change and hydrodynamic flow.