• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.397-402
• /
• 1994

기계적 합금화방법을 이용 실온에서 철분말의 질화물을 얻을 수 있다. 이때 얻어진 준안정 철질화물은 질소농도가 14.9[at. %N]이하에서는 bcc 구조의 과포화 고용체가, 그리고 19.4[at. %N]이상에서는 고온상인 hcp 구조임을 확인할 수 있었다. 또한 bcc상의 Fe원자당 Volume은 문헌에 보고된 N-martensite의 것보다 작은 값을 나타내었다. 제조된 철질화물의 실온 포화 자화값은 질소농도가 증가함에 따라 감소하였으며, 이 결과는 bct 구조의 철질화물에서 질소농도가 증가함에 따라 자화값이 증가하는 것과 대조적이었다.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.69-75
• /
• 1997

Thin films of $Si0_2(1000{\AA})/CoNiCr(400{\AA})/Cr$ were fabricated as a function of Cr thickness by KF magnetron sputtering. The saturation magnetization, coercive force and squareness with annealing temperature for these films were investigated. The values of saturation magnetization of $SiO_2/CoNiCr/Cr$ thin films decreased as the thickness of Cr underlayer increased, whereas coercive force increased as the thickness of Cr underlayer increased. The value of Ms was 600 emu/cc and the maximum value of Hc was 550 Oe. Especially, the value of saturation magnetization was rapidly decreased $SiO_2/CoNiCr/Cr(1700{\AA})$ thin films as the annealing temperature increased And the coercive force increased as the annealing temperature increased When annealing temperature was $650^{\circ}C$, the Ms was reduced to 90 % of the as-deposited film. And the Hc was showed maximum 1600 Oe. It was thought that Cr diffusion into CoNiCr layer reduced the magnetic moment of CoKiCr layer. In addition. Hc might he increased due to grain growth perpendicular to the film plane.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.177-183
• /
• 1999

Ultrafine $CoFe_{1.9}Bi_{0.1}O_4$ particles were fabricated by using a sol-gel method and their magnetic and structural properties were investigated with an x-ray diffractometer (XRD), a vibrating sample magnetometer (VSM), and a M$\"{o}$ssbauer spectrometer. The result of x-ray diffraction and M$\"{o}$ssbauer spectroscopy showed that the powders fired at and above 523 K had only cubic spinel structures. M$\"{o}$ssbauer spectra measurements showed that the powders annealed at 523,723 and 823 K possessed ferrimagnetic nature and paramagnetic nature due to superparamagnetism, simultaneously at room temperature and the powders annealed at and above 923 K behaved ferrimagnetically. In the case of the powder annealed at 923 K, the lattice constant was $a_0=8.398$\pm$0.005{\AA}$ and the hyperfine fields were $H_{hf}(A)=479kOe,\; H_{hf}(B)=502kOe$. The isomer shifts indicate that the iron ions are ferric at tetrahedral[A] and octahedral sites [B], respectively. The magnetization as a function of annealing temperature increased as increasing annealing temperature. The largest coercivity values were $H_C=1368\;Oe$ AT 923 K annealing temperature. In the case of the powder annealed at 1123 K, the magnetization value was $M_S=75\;emu/g$ and this value was similler to that of $CoFe_2O_4$.Fe_2O_4$.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.22-35
• /
• 1995

In this study, crystal structures and magnetic properties of as-ast, annealed and rapidly solidified Mn-A1-M( M=Cu, Fe) alloys have been investigated. In $Mn_{0.56}Al_{0.44}$ alloys, the largest fraction of $\tau$ phase and values of magnetic properties was obtained in Mnl, i6Alo or alloy. And this alloy was used as the basic composition. In $Mn_{0.56-X}M_{X}Al_{0.44}$ alloys, when annealed, $\tau$- and $\beta$-Mn phase appeared at x< 0.08, $\tau$- and $\kappa$ phase at 0.10 $\leq x \leq$ 0.12 and $\kappa$- phase only at 0.15 $\leq x \leq$0.20 . When rapidly solidified, specimens showed similar phases as when annealed except that $\varepsilon$ phase appeared at x=0.04. In Mnu FexAlo 44 alloys, asyast specimens showed $\tau$-, $\beta$-Mn and $\gamma_2$- phase at x<0.08 and K and $\beta$-Mn phase at x>0.10. When rapidly solidified, Mn-Fe-Al specimens showed $\varepsilon$-, $\gamma_2$- and small amount of $\tau$- and $\kappa$ phase at x<0.08 and $\kappa$- phase only at 0.$\leq x \leq$0.20. All the alloys investigated were ferromagnetic. The Curie temperature of annealed specimens and rapidly solidified of Mno 5sAlu 44 alloy were -650K and -644K. Spontaneous magnetization( UII of annealed and rapidly solidified specimens were 40-45 (emu/g) and 50-52(emu/g), respectively. Remanent (M,) to saturation magnetization( Ms) ratio was -0.7. M, of rapidly solidified specimen was about 48(emu/g). Magnetic properties of $Mn_{0.56}Al_{0.44}$ alloys were found to be determined by the relative fraction of ferromagnetic r- and K- phase. When M= Cu and x=0.15, maximum as($\sigma_{0.0}$) was obtained by about 64.3 emu/g), and when M=Fe and x=0.15, 66.4( emu/g). The Curie temperature decreased as x increased.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.470-474
• /
• 1996

증착법을 이용해 증착시 기판의 온도를 변화시키면서 MnSbPt 합금 박막을 만들고 이를 열처리 한 후 나타나는 자기 및 자기광학적 성질을 조사하였다. Mn45Sb45Pt10조성의 박막에서 0.85$^{\circ}$의 높은 Kerr Rotation Angle값을 나타내고, 또한 광원의 입사파장이 단파장으로 이동하여도 우수한 Kerr Rotation Angle 값을 유지함으로써 자기광 재료로서의 기록밀도 향상가능성이 기대된다. 이 재료가 갖고 있는 열악한 자기적성질도 열처리를 통하여 포화자화값과 보자력의 향상 효과를 얻었지만, 자기광 재료가 갖추어야할 수직자화를 얻기에는 미흡하여 이에 대한 보완이 필요하다.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.9-9
• /
• 2003

최근에 Fe-CU, Fe-Si 등과 같이 자성금속과 비자성금속화합물에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 기계적 합금법으로 제작한 Co/sub 5/C/sub 95/ 나노미립상 합금의 구조와 자기적 성질을 조사하였다. 그림(1)은 EXAFS 스펙트럼의 푸리에변환이다. 이로부터 합금화시간에 따라 Co-Co 결합은 점차적으로 작아지며 Co-C 결합이 진행됨에 알수 있다. 그림(2)은 합금화시간에 따른 포화자화값과 보자력의 크기이다. 포화자화는 합금화 시간에 따라 연속적으로 작아졌으며 보자력은 커지다가 작아지는 경향을 보였다. 포화자화가 작아지는 것은 Co-C 결합이 생기면서 Co의 쌍을 이루지 않은 전자가 C의 전자와 쌍을 이루면서 상쇄되기 때문인 것으로 보인다. 보자력의 거동은 Co 미립자가 다자구영역으로부터 단자구영역으로 전환되기 때문인 것으로 해석될수 있다. Co 미립자는 C의 캡슐형에 싸여있으며 60시간과 100시간에서 Co 미립자의 크기는 X-ray 회절선의 넓어짐으로부터 Scherrerr 공식을 이용하여 계산한 결과 18nm 와 15nm 정도가 됨을 알 수 있었다. 연구를 통하여 Co/sub 5/C/sub 95/ 나노미립상합금을 기계적합금법으로 만들 수 있음을 알 수 있었다. 이론적인 계산에 의하면 초상자성 Co 입자의 크기는 8.2nm 정도가 되었으며 본 실험에서 최종 입자의 크기는 15nm까지 작아졌다.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.56-60
• /
• 1993

We have investigated the dependence of the magnetization, anisotropy, coercivity, and Kerr rotation on the Fe concentration in FeCo/Pd multilayer thin films, where the Fe concentration in the FeCo sublayer varied between 0 and 100% with maintaining the same sublayer thickness of $2.5\;{\AA}$ FeCo and $10.5\;{\AA}$A Pd. The maximum saturation magnetization was observed at the Fe concentration of about 48at.% in the FeCo sublayer. Perpendicular magnetic anisotropy and coercivity of the FeCo/Pd multilayer thin film decreased monotonically with increasing the Fe con-centration. The Kerr rotation angle also decreased with increasing the Fe concentration and the amount of vari-ation was remarkably changed with decreasing the light wavelength.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1997

$Co_{84}Hf_{16}$ (1300$\AA$, 2150$\AA$) thin films were prepared by dc magnetron sputtering method. To investigate the uniaxial anisotrpy of the sample, the saturation and effective magnetization of the thin films were measured by VSM and FMR, respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For 1300$\AA$, 2150$\AA$, the effective magnetization was measured at the temperatures from T=77K to T=300K. The results were analyzed in terms of Bloch's law $M_s(T)=M_s(0)(1BT^{3/2}CT^{5/2}$. The Bloch coefficient B and C were determined by fitting. $M_{eff}(0)$ was obtained by extrapolating $M_{eff}$ to 0 K. From this result, the spinwave stiffness constants D was also determined and the exchange stiffness constants $A_{eff}$ were calculated by Kittel's resonance conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.681-684
• /
• 2015

Magnetization is very important in the ferro-magnetic physics and provides useful informations in the application field of magnetic devices. Generally, the only first acquired domain pattern is not helpful to recognize domain pattern. Many images are needed to visualize domain pattern through image processing. These images were obtained a 8-bit digital camera. The operation was the subtraction of pixel values of multi domain imanges from the images with 255 of pixel value, which was obtained in the saturated state of magnetic materials. The magnetic domain images was visualized gradually with increasing the number of subtracion operation. LABVIEW was used as an image processing tool and the optic microscope with a polarizer was used in this experiment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.179-179
• /
• 2016

희토류계 영구자석은 높은 보자력과 잔류 자화을 가지고 있어 자기기록저장매체, MEMS(엑츄에이터), 센서 등의 응용 분야에 적용시키기 위해 다양한 연구들이 진행되고 있다. 하지만 희토류계 원소의 수급 및 가격의 문제점으로 친환경자석으로의 전환 및 희토류나 중희토류를 사용하지 않는 비희토류계 영구자석을 개발하는 연구에 대한 필요성이 대두되고 있다. 이 중 Fe-N 계 자성 물질인 $Fe_{16}N_2$는 포화 자화 값이 현재까지의 자성물질 중 가장 높은 값(240emu/g)을 나타내며 상대적으로 높은 결정자기이방성 상수를 가지고 있어 비희토류계 영구자석 물질 중 하나로 주목받고 있다. 본 연구에서는 $Fe_{16}N_2$ 박막을 얻기 위해 DC Magnetron Sputtering 방법을 이용하여 Si wafer 위에 박막을 증착하고 증착공정 조건 중 질소 유량 및 Sputtering Power를 변수로 따른 박막의 성장, 조직변화, 자성 특성을 관찰을 통해 최적의 공정 조건을 찾고자 하였다. $N_2$ 가스 유량 변화에 따른 박막의 성장 속도는 거의 변화가 없었으며 $N_2$ 가스 유량의 증가에 따라 박막 내 Fe의 함유량은 감소하였다. 모든 공정 조건에서 $Fe_3N$, $Fe_4N$, $Fe_{16}N_2$ 상들이 섞여 성장하였으며 XRD를 통한 상분석과 더불어 VSM을 통한 자성 특성을 분석해본 결과 $Fe_{16}N_2$의 분율이 가장 높게 성장된 공정 조건은 Power는 200W, $N_2$ 가스 유량은 20sccm이었으며 이 조건에서 2.45T의 포화 자화 값과 1.4T의 잔류 자화 값을 얻을 수 있었다.