• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.34-38
• /
• 1978

In this Paper, the saturation behavior in the electrical phenomena of the DH Laser diode is explained theoretically using rate equnations. The carrier density approaches to ns gradually well above the threshold and theoretically expected curve of and calculated value of $\Delta$Vj are exactly equal to the experimental results which was observed, as shown. The carrier saturation factor If is proposed and we show k$\beta$ is a measure of the ideality of the sample diode. In the light of relation, the sample diode's idoality increases as f decreases.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1932-1933
• /
• 2007

본 연구에서는 sustain 펄스의 개수와 폭의 변화에 따른 sustain 방전의 휘도특성을 측정하였다. 실험을 위하여 PDP 구동실험장치에 사용하는 디지털 시스템과 고전압 펄스 driver 회로부를 개발하였다. 실험결과, 1TV-field 동안 인가되는 sustain 펄스의 개수가 증가할수록 휘도는 완만한 포화곡선을 나타내며 증가하였고 펄스의 폭이 좁아질수록 휘도가 증가하였다. 그리고 펄스폭에 대한 휘도의 증가 정도는 펄스의 개수가 증가할수록 커졌다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.441-441
• /
• 2010

Hyperthermal neutral beam (HNB)은 박막 성장에 필요한 에너지와 반응 입자들을 동시에 공급할 수 있기 때문에 특히, 저온에서 박막을 성장시킬 때 매우 유용하다. 이와 같은 목적으로 race track 형태의 자기장 구조를 갖고 있는 2.45 GHz electron cyclotron resonance (ECR) plasma를 이용한 HNB 소스를 개발하였다. HNB 소스에서 인출되는 입자들은 중성 입자 뿐만 아니라 이온이나 전자와 같은 하전 입자들로 구성되어 있다. 그러나 양질의 HNB를 얻기 위해서는 하전 입자들의 구성 비율을 최소화해야 한다. HNB 소스는 하전 입자의 구성 비율을 1 % ($1{\mu}A/cm^2$) 이하가 되도록 설계되었다. 이것을 위해서 영구 자석의 자기장을 이용한 plasma limiter를 설계하였다. 대부분의 전자는 limiter 앞에 형성된 자기장의 구조와 반응하여 주로 gradient B drift와 curvature drift를 통하여 차단되고, 이온은 로렌츠 힘을 받아 빔 축으로 부터 벗어나도록 하였다. Limiter의 특성을 연구하기 위해서 정전탐침을 limiter에서 빔 축 방향으로 이동시키면서 I-V 곡선과 이온 포화 전류 및 전자 포화 전류를 측정하였다. 측정 결과를 바탕으로 plasma limiter의 성능을 검증하였고 문제점을 논의하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.231-238
• /
• 2008

A column testing device capable of measuring the electrical resistivity of soil at 3 different locations was developed to verify applicability of bulk electrical conductivity (BEC) breakthrough curves in monitoring contaminant transport. Tracer injection tests were conducted with three different types of saturated sands to obtain average linear velocities and longitudinal hydrodynamic dispersion coefficients based on BEC breakthrough curves and effluent solute breakthrough curves. Comparative analysis of transport parameters obtained from curve fitting the results into the analytical solutions confirmed the validity of resistance measurements in estimating time-continuous resident solute concentration. Under the assumption that a linear relationship exists between ${\sigma}_{sat}-{\sigma}_w-C$, the BEC breakthrough curves are able to effectively reduce the laborious and time-consuming processes involved in the conventional method of sampling and analysis. In order to reduce possible uncertainties in analyzing the BEC breakthrough curves, it was recommended that resistance measurements take place nearby the effluent boundary. In addition, a sufficient electrical contrast or difference in the electrical conductivity of the influent and the saturating solution is required to conduct reliable analysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.273-278
• /
• 2008

This study was carried out in order to test unsaturated hydraulic conductivity estimation of van Genuchten's and Campbell's models using one-step outflow method through Tempe pressure cell. The undisturbed soil cores (columns) were taken from Ap1, B1 and C horizons of Songjeong series (the fine loamy, mesic family of Typic Hapludults). After the saturated hydraulic conductivity Ks of the cores was determined by constant head method, water outflow rate and retentivity of cores were measured in Tempe pressure cell. Fitted curves by models accorded to measured data except for both end of pressure range. In near-saturated condition, measured water retention characteristics showed a relatively better fitness with Campbell's model than van Genuchten's. The soil unsaturated conductivity estimated by Campbell's model was higher than by van Genuchten's. In Ap1 and B1 horizon, the soil unsaturated conductivities obtained by one-step outflow method went between van Genuchten's and Campbell's hydraulic functions, slightly closer to van Genuchten's. In C horizon, van Genuchten's model had better fitness with the one-step outflow data. Consequently, van Genuchten's model generally had better fitness with measured hydraulic conductivity than Campbell's model at the soil water potential range of -10~-75 kPa, especially in C1 horizon. In near-saturated condition, Campbell's model could be thought as relatively accurate hydraulic model, because of the better fitness of Campbell's model with soil water retention data than van Genuchten's model.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.84-95
• /
• 2008

In this study, preconceptions held by chemistry major secondary school science teachers were searched in relation to explanations of water evaporation phenomena with phase equilibrium diagrams. 25 chemistry major science teachers were selected to complete questionnaires developed in this study and 6 among of them were selected to participate in follow-up interviews. Among these, 10 participants were selected for an evaluation of the change of their preconceptions through lessons developed in this study. From the results, it was found that many teachers believed that the phase equilibrium diagram could not explain water evaporation phenomena. They also thought that there was no relation between vapor pressure and the vertical axis of the phase equilibrium diagram. However, after the lessons in earth science, they recognized that the vapor pressure curve of the phase equilibrium diagram could be explained by adopting a saturated vapor curve. Because they had known the process of application the conceptions of saturated situation, nonsaturated situation, process of equilibrium movement in saturated vapor curve. They could understand natural phenomena such as evaporation with the phase equilibrium diagram through a change in their conceptions as guided from science lessons integrating earth science and chemistry.

• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2015

The water saturation ($S_w$), which is very important to estimate hydrocarbon reserves in the reservoir, has been determined from resistivity index (RI) by using the Archie's formula. However, in many cases, it has been reported that n is not constant for a given formation and it could be varied with water saturation. In addition, it frequently happens that the line obtained by linear regression analysis on log-log scale does not pass through the origin. In order to overcome these drawbacks, we suggested a modified Archie's formula, which can handle almost all the RI vs. $S_w$ cross-plots whether the trend is straight or curved and whether it passes through the origin or not. We also demonstrated that how to determine conductivity exponent ${\mu}$, critical water saturation $S_c$, and saturation distribution factor b in the laboratory to use the modified Archie's formula. Since the modified Archie's formula takes into account pore structure, pore water distribution, and wettability of reservoir such as clean sandstone and carbonate rocks, it might improve field applicability.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.34-41
• /
• 1998

We have theoretically investigated torque curve shapes of simple uniaxial magnetic materials by considering conditions for round peaks to exist. These conditions are functions of an applied field, anisotropy field, ans lowest critical field $h_0$ for a domain wall to move or nucleate. The peak having a height of 2h appears when h is lower than h$_1$, the peak having a height of 1 appears when h is higher than h$_2$, ans two peaks having heights of 1 and -1 appear when h is higher than h$_3$. It was found that torque curves of simple uniaxial magnetic materials could be classified into 8 distinct types depending on the existence of hysteresis, the number of the round peaks, and the reversal mechanisms. Simple uniaxial magnetic materials also found to be classifed into the 5 groups depending on $h_0$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.12-12
• /
• 2001

PLZT(10/30/70), PLT(10) 및 PZT(30/70) 와 같은 강유전체 박막의 이력곡선을 field-dependent polarization 모델을 이용하여 시뮬레이션하고, 측정한 실험적 결과와 비교, 분석하였다. PZT(30/70) 박막의 경우, 5V 이상의 인가전압에서 분극의 포화현상이 둔감하게 나타나고 시뮬레이션 값과의 차이도 심해 강유전체 분극이 순수한 dipole 외에도 다양한 전하의 영향을 받아 형성된다는 사실을 알 수 있다. 또, quasi-MFISFET 소자의 드레인 전류는 field-dependent polarization 모델의 강유전체 이력곡선에서 얻은 파라미터를 square-law FET 모델에 적용시켜 효과적으로 추출하였고, 모델링 결과는 실험값과 유사하였다. 그리고, quasi-MFISFET 소자의 gate 에 -10V의 ′write′ 전압을 인가한 상태에서 PZT(30/70) 박막을 사용한 경우, PLZT(10/30/70), PLT(10) 박막 보다 빨리 채널이 형성되었는데, 그 원인은 강유전체 박막에 따른 retention 특성에서 PZT(30/70) 박막의 분극 감소가 PLZT(10/30/70), PLT(10) 박막의 분극 감소 보다 약 3∼4 배 이상 크다는 점에서 찾을 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.61-67
• /
• 2006

We developed a constant current source which is insensitive to threshold voltage variation caused by irregular grain boundary distribution in polycrystalline silicon. The proposed current source has superior saturation characteristics over wide range of input voltages as well as small current error compared to the previously reported Vth compensated sources. We measured the circuit performance and error in current due to parameter variation by using HSPICE.