• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.660-662
• /
• 2009

Purpose: There are several modalities to reattach the amputated auricle. Microvascular replantation can achieve the best outcome, but technically difficult. Conventional composite graft is technically easy, but uniformly unsuccessful. Our successful experience of reattachment using postauricular subcutaneous pocket is presented. Methods: The amputated tissue was placed in its anatomical position with buried sutures. The amputated part is dermabraded to remove the epidermis and outer layer of dermis(Fig. 1, Center, left). Postauricular skin flap was then raised and the reattached dermabraded ear was buried beneath the flap(Fig. 1, Center, right). Two weeks after the original surgery, the buried ear was removed from its pocket (Fig. 1, Below, left). Results: The ear was reepithelialized spontaneously in 7 days. At 3 months, the reattached ear has satisfactory appearance without contour deformity(Fig. 1, Below, right). Conclusion: This technique provides increase in contact surface between the amputated segment and the surrounding tissues which supply blood, serum, oxygen and nutrients, maximizing the probability of "take". Minimally injured dermis can be healed from spontaneous reepithelialization and provides minimal contour deformity. We have used this non-microsurgical technique with very satisfying outcome.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.43-48
• /
• 2009

It is reported by many researchers that the textured bearing surfaces, where many tiny micro-pockets or enclosed recesses were incorporated, can enhance the load support and reduce friction force. Recently, the basic lubrication mechanism of micro-pocketed parallel surfaces are explained in terms of "inlet suction" using continuity equation and simply cavitation condition. However, it is required that more actual cavitation condition in the pocket region should be applied to estimate exact bearing performance. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the exact lubrication characteristics of infinitely long slider bearing with micro-pockets. The results show that the pressure distributions are highly affected by pocket depths, its positions and numbers. The numerical method adopted in this paper and results can be use in optimal design of textured sliding bearings.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.622-627
• /
• 2007

Purpose: Although the autogenous tissue transfer has been the mainstay of the breast reconstruction, concern for the donor site morbidity can lead to the superseded method using tissue expander with implant or permanent expander-implant. However, the additional procedure of tissue expansion possibly cause discomfort and raise the cost. We tried to verify the efficacy of using the saline-filled breast implant by itself for the safe and convenient immediate breast reconstruction modality if the patients have small, round and non-ptotic breasts and the sufficient breast skin can be saved with mastectomy. Methods: From July 2002 to July 2005, 29 breasts of 26 patients were restored only with the saline-filled breast implant immediately after the skin sparing or nipple-areolar skin sparing mastectomy in Asan Medical Center. A pocket with pectoralis major and serratus anterior muscle was created and the implant was covered with this muscle pocket. Simultaneous contralateral augmentation was performed in patients whose mastectomy specimen weighed less than 100g. Results: Using only the saline-filled breast implant resulted in the successful reconstruction with few complications including partial necrosis of nipple areolar skin (five cases, 17.2%), capsular contracture (three cases, 10.3%), hematoma (one case, 3.4%), depigmentation of areolar skin (one case, 3.4%), hypertrophic scar (one case, 3.4%), which were all healed by conservative management. There were no significant complications such as implant exposure and subsequent removal. Conclusion: Immediate breast reconstruction only with the saline-filled breast implant can be a satisfactory alternative option for the patients whose breast is small, round and non-ptotic, especially when the nipple-areolar skin of the breast is preserved in the mastectomy.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.357-364
• /
• 2015

Because of the unique images of monsters and people curious about the unknown things in the game, gamers escape from ordinary life to explore a whole new world of games in the virtual space. Gamers monster while dealing with characters that are not in the real world, I feel the joy and freshness, much to the popularity of these unique characters are gamers. Is the study of the game Monster character to now is still food that fell short, there is currently many games with the simple design by limiting the monster character design for simple figurative design in the characters monster representation of the figurative simple character designs is fulfilling the week The feed. To analyze the convergence of the monster character design in various ways and to apply the formative apply thoughtful design of the monster characters. This study combines research with a multidisciplinary approach based on the traditional image of the monster character image.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.29-40
• /
• 2004

The performance of the National Highway is raised, but the capacity of the signalized intersection on the National Highway is low. It's operated by TOD(Time Of Day) mode. To evaluate of the performance of COSMOS(Cycle, Offset, Split Model for Seoul), a real time traffic adaptive signal control system, on the National Highway, studied volume, travel time and queuing length at TOD control and TRC(Traffic responsive Control). Consequently, the average travel speed at TRC is high $2.9\~16.7$km/h then the average travel speed at TOD control. And te queuing length at TRC is low $15\~196m$ then the queuing length at TOD control.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.439-447
• /
• 2016

Interest in Augmented Reality (AR) game $Pok{\acute{e}}mon$ GO is getting heightened. However, based on its characteristic, various direct and indirect problems are highlighted, thus increasing concerns. Although the game is not formally released domestically, there are limits in national game classification to apply on such outdoor Augmented Reality game. This paper will examine the problematic cases regarding Pokemon GO and analyze internal and external game classification system to discuss safe gaming measures for domestic users. In result of examining cases, need for adding 'physical danger' in current game classification system for user's safety was shown. As the government's game regulation is being eased, appearance of a variety of games using Augmented Reality technology in near future is predicable. Therefore it is important to prepare improvement of game classification system as a pre-safety measure, and it is expected to bring positive effect on game usage and industrial growth through safe game usage.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.397-402
• /
• 2016

Recently, many ICT companies are trying to expand the ecosystem of VR (Virtual Reality) and AR (Augmented Reality). They are developing a variety of industries such as entertainment, education, e-commerce and so on. There is also contains the power, energy field. And application related with VR/AR will increase in power industry. Thus, Platform is necessary because there are problems such as re-use, interface with legacy system and security. We can expect the convenience and efficiency by developing VR/AR power platform. In this paper, we will discuss the trends of VR/AR technologies, possibilities of VR/AR in energy field, essential elements of VR/AR power platform. In the future, we expect to lead standards of VR/AR in energy and to develop a killer application such as Pokemon GO.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.193-203
• /
• 2008

This study was conducted to investigate the feasibility of the expedite construction of new pavement systems using precast concrete slabs and to develop the design and construction guide based on the results of the experimental construction. Half scale concrete slabs were designed and fabricated and the optimal reinforcement design, linkages between the slabs in the longitudinal and transverse directions, and the grouting methods were investigated. The experimental construction was performed fast and easily by assembling two slabs in the longitudinal direction and the other two in the transverse direction. The slabs were leveled and the pockets and the space between the slab bottom and the underlying layer were grouted. From the experimental construction, details about the design and construction of the precast pavements were acquired. Finally, the design and construction guide for the newly constructed precast concrete pavement systems was developed.

• The Korean Journal of Community Living Science
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2002

This study was conducted to estimate the amounts of the electromagnetic wave penetrating from a cellular phone in a pocket of dress shirt, as well as to test how different the penetration amounts were under the conditions of wearing. It was also investigated the possibilities that the amounts of the electromagnetic wave penetrating could be decreased by using twofold pocket or electromagnetic wave free fabric. The amounts of the electromagnetic wave penetrating were measured in the following five cases; one-layered pocket with 10 different fabrics as dress shirt, a pocket adding a layer of knitted cotton, two-layered pocket with same fabric as dress shirt, two-layered pocket adding a layer of knitted cotton, and one-layered pocket adding a layer of electromagnetic wave free fabric. Each of these five cases were measured using the front and back sides of a cellular phone facing to the body. The results were as follows; 1) The amounts of the electromagnetic wave penetrating were not significantly different in 10 different fabrics and were all above the caution range (0.02mW/$cm^2$). 2) The amounts of the electromagnetic wave penetrating in cases of the back side of the cellular phone to the body, were more than in cases of the front side. 3) There is a significantly differences in part on adding a knitted under wear to one and two layers of the pocket in the case of penetration amount under the wearing conditions. 4) The amounts of the electromagnetic wave penetrating in cases of adding a layer of electromagnetic wave free fabric, were close to the safe standard value of it. The above results suggested that facing the front side of cellular phone to the body and using extra layering with some electromagnetic wave free fabrics might have some protective effects again to the penetration amounts.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.75-88
• /
• 2001

Signal optimization model for alternative use of lanes at a signalized intersection with an stop-line added backward was presented in this paper. The simulation results shot-ed that the traffic fed from the stop-line passed the intersection in each specified phasing interval for left and through traffic. The experimental results indicated that the proposed model was much superior to traditional signal optimization methodology in reducing delay, fuel consumption, and disutility index for delay and stops. The effects for reducing delay were greater than those for doing fuel consumption and disutility index due to the added stop-line. The proposed model is expected to alleviate traffic congestion at intersections, both which have no left turn pocket, and which have large left turn volume. The model is recommended to adapted for intersections spaced long among them with no near driveway.