• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2012

As old concrete pavements of over 20years in age are increasing in expressways, the repair and rehabilitation of concrete pavement have become an important issue. Although asphalt overlay is widely used as an alternative to rehabilitate the old concrete pavement, problems due to infiltrated water such as reflection crack and pothole are imposing a very serious threat to its performance. This study proposes waterproof membrane as a solution to minimize the damage due to reflection crack and infiltrated water, and accelerated pavement testing was carried out for the performance comparison of composite pavement with waterproof membrane and ordinary tack coating. The experiment used water spraying to simulate rainfall, and the behavior and moisture resistance characteristics of overlay pavement were analyzed. The experimental result indicated that the strain pattern of waterproof membrane section differed from ordinary tack coating section because waterproof membrane caused the asphalt pavement and concrete pavement to move together. Additionally, since waterproof membrane minimized the infiltration of water and delayed the occurrence of reflection crack by about 70% in comparison to ordinary tack coating method. Moreover, the damage due to infiltrated water also decreased.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.19-28
• /
• 2012

A measuring technique for tire-pavement interaction noise that uses a proposed noble close proximity(NCPX) method, which has been proofed in terms of the reliability and consistency of interaction noise measurement through several researches, equipped with surface microphones has been adopted in order to perform bridge deck pavement noise evaluations on four different pavement surfaces. Through field testing measurement of bridge deck pavement in Seoul inner ring road, the appropriate noise-measuring procedures have been used for evaluating the noise characteristics of four different surfaces. Measuring results show that tire-pavement noise levels vary depending on the surface types and vehicle speeds. Furthermore, the different characteristics of tire-pavement interaction noise can be found before and after the new surface construction of bridge deck pavements in terms of the 1/3 octave band analysis of vehicle speed.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.539-548
• /
• 2007

The study was carried out to examine combined effects of packaging and electron-beam irradiation on lipid oxidation and meat color of fermented sausages during storage. Fermented and aged sausages were exposed to electron-beam at 2 kGy. The samples were vacuum or aerobic-packaged with the non-irradiated samples at 4±1℃. Regardless of irradiation, the pH values of vacuum-packaged samples was lower than those of aerobic-packaged ones at 14 day (p<0.05). Total microbes and lactic acid bacteria counts significantly decreased during the storage period (p<0.05). And counts of non-irradiated samples were significantly higher than those of irradiated (2 kGy) samples with aerobic packaging. The TBARS values of 2 kGy-irradiated samples were significantly higher than those of non-irradiated samples. The TBARS values of vacuum packaged samples had lower than those of aerobic-packaged ones (p<0.05). Colors (parameters L*, a* and b* values) tended to decrease as the storage period increased. Redness(a*) and yellowness (b*) of 2 kGy irradiated samples were higher than those of non-irradiated ones (p<0.05). In sensory analysis, irradiated (2 kGy) samples with aerobic packaging had higher off-flavor than non-irradiated ones (p<0.05). Therefore, results indicated that irradiation coupled with vacuum packaging may minimize TBARS values of irradiated sausages during storage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.717-724
• /
• 2020

In general, the factors affecting the heat transfer of asphalt pavement are divided into weather factors and pavement materials. Among them, material factors include the thermophysical and surface properties. An experiment was conducted on the thermal-physical factors of asphalt, which are the basis for the pavement failure model. The thermal conductivity, specific heat capacity, thermal diffusivity, and thermal emissivity were evaluated as the thermo-physical properties of asphalt. The specimens (WC-2 & PA-13) used in the experiment were compacted with a Gyratory Compactor. The experimental results of WC-2 and PA-13 showed a thermal conductivity of 1.18W/m·K and 0.9W/m·K, specific heat capacity of 970.8J/kg·K and 960.1J/kg·K, thermal emissivity of 0.9 and 0.91, and thermal diffusivity of 5.15㎡/s and 4.66㎡/s, respectively. Experiments on the heat transfer characteristics (thermo-physical properties) of asphalt pavement that can be used for thermal failure modeling of asphalt were conducted.

• Conservation Science in Museum
• /
• v.16
• /
• pp.96-113
• /
• 2015

High-barrier films are used to store cultural heritage objects in a safe environment sealed from oxygen and moisture. One of the high-barrier films use populary E manufactured by Japanese company M from the 1990's. However, this product has stayed in wide use, due to dearth of research on related subjects - including studies comparing it with other similar products-, in spite of the fact that high price information about its characteristics and environmental conditions is largely lacking. This study examines the characteristics of a number of high-barrier films with the goal to establish environmental standards for safer conservation of cultural heritage objects. E by the Japanese manufacturer M is compared with four other films; an electronics packaging films by a Korean firm, a film specially produced for the purposes of experiment in this study and a zipper bag-type film. Experiments were performed to compare the properties and gas blocking ability of the films by looking at their cross-section and measuring the thickness, tensile strength, elongation, absorbance of UV and visible light, yellowing and the permeability for oxygen and vapor. Based on these experiments, there are observed changes under different environmental conditions and depending on the length of use through temparature and humidification reproucing test. The results showed that while the high-barrier film by the Korean manufacturer was suitable for use as a packaging material for cultural heritage objects, the zipper bag-type film (P) was ill-adapted for this purpose. Based on the experiments reproducing the real-world environment, the length of useful life was also determined for each.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1043-1051
• /
• 2017

Asphalt overlay on deteriorated concrete pavement has a problem of early damage due to reflective cracking. There is a need for a new method capable of reducing reflection cracking and ensuring the durability of pavement. The purpose of this study was to obtain durability of asphalt overlay with stress absorbing membrane interlayer (SAMI) using epoxy asphalt binder. The tensile performance, durability, water resistance and bonding performance of Epoxy-SAMI were evaluated by various tests. As a result of tests, Epoxy-SAMI meets the quality standard of the bridge waterproofing material. The repeated direct tensile test was carried out to investigate the effect of reflective cracking reduction. When the Epoxy-SAMI was applied, it had 1.2~1.56 times higher reflective cracking resistance than PSMA asphalt concrete with the thickness of 10cm even if the section thickness decreased. 4-point bending beam test results showed the number of fatigue failures increased 7.5 times when Epoxy-SAMI was applied. The Epoxy-SAMI was found to be effective in improving the durability of the asphalt pavement overlay because it serves to prevent reflective cracking, increase lifespan, and function as a waterproof layer.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.290-297
• /
• 2014

BACKGROUND: The current study purposed to analyse the dissipation levels of a neonicotinoid insecticide and clothianidin in paddy and upland soils and clarify the effects of soil moisture on degradation and persistence of the insecticide. METHODS AND RESULTS: In order to achieve the research purposes, clothianidin 8% SG was applied to the paddy and upland fields at the rate of 0.024 kg a.i./10a, while the analytical standard was treated at 0.25 mg/kg soil under laboratory conditions. Based on the multiple first-order kinetics, total clothianidin in soils was dissipated with $DT_{50}$ of 6.7-16.1 and 6.9-8.2 days in the paddy and upland fields, respectively, whereas the figures under the laboratory condition became larger showing 56.3 and 19.6 days. CONCLUSION: As affected by soil moisture, some differences in degradative pathways were observed. Flooding of soil caused evidently demethylation and delayed cyclization of a major metabolite, thiazolylmethylguanidine (TMG) and methylaminoimidazole(MAI), compared to the aerobic upland condition. More than 80% and 50% of the parent compound was dissipated by the 24th day after the final application in both soils and, transformation products had constituted most of soil residues after that.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.313-313
• /
• 2011

오염물질은 배출원의 형태에 따라 점오염물질과 비점오염물질로 구분하고 있고 점오염물질은 생활하수, 산업폐수, 축산폐수, 환경기초시설 방류수 등으로 발생원이 명확하고 수집하여 처리 및 관리가 용이하나 비점오염물질은 배출위치가 명확하지 않으며, 강우 시 일시적으로 대량 배출되는 특징을 가진 농경지, 도로, 대지, 임야 등에서 배출되는 오염물질을 말한다. 우리나라에서 비점오염은 전체 수질오염의 42~67%(2003년)를 차지하는 것으로 나타났고, 2015년에는 전체 수질오염의 65~75%에 이를 것으로 예상되고 있다. 이 중 농업 비점오염원은 총 수질 오염량의 30%이상을 차지할 것으로 추정하고 있으나 이를 저감하기 위한 최적관리방법의 효과검증에 관한 연구는 아직 미미한 상태이다. 이에 본 연구에서는 농경지 중 밭에서 발생하는 비점오염을 저감하기 위한 기법으로 다양한 규모와 형태의 Silt Fence/식생밭두렁/침사구를 설치하여 밭 비점오염에 대한 저감효과를 평가하고 제어대책을 개발하여 최적관리기법을 제시하고 이에 대한 매뉴얼을 개발하기 위한 기초연구를 실시하려 한다. Silt Fence는 주로 건설공사현장에서 홍수유출 발생 시 인접한 하천 및 호소 등으로 유사 및 오염물질이 유입되는 것을 방지하기 위해 임시적으로 설치하는 시설로 합성 직물 필터를 나무나 금속 막대로 연결하여 등고선 방향으로 설치하는 것으로 대상 지역의 토양이 교란되기 전에 그 지역 아래쪽에 설치한다. 식생밭두렁은 밭의 이랑의 길이가 길어질수록 강우 시 빗물이 하단에 이를 때 늘어난 유량과 빠른 유속으로 토양침식이 가중되는데, 이때 30~35m간격으로 식생밭두렁을 설치하게 되면 상부와 하부의 침식정도가 유사한 경향을 보여 식생밭두렁을 설치하지 않은 지역에 비해 토양의 침식정도가 작게 나타나게 된다. 이러한 Silt Fence/식생밭두렁/침사구의 밭 비점오염의 저감효과 평가 및 제어대책 개발을 위한 기초 실험을 수행하기 위해 경상남도 사천시 용현면 선진리 일대에 시험포장을 조성 하였으며, 시험포장내에 6개의 Plot을 만들어 하단부에 포장에서의 유출수의 유량을 측정하기 위해 플룸을 설치하였고 실내실험을 통해 플룸의 수위-유량관계 곡선을 작성하였다. 포장의 토양특성을 판별하기 위해 Plot별로 토양시료를 채취하여 특성을 분석 한 결과 6개 Plot모두 모래함량이 많은 점토질 사질토로 분류되었다. 향후 강우 시 시험포장에서 발생하는 유출수의 수질을 분석하고 Silt Fence/식생밭두렁/침사구의 오염물질 저감효과를 분석하여 제어대책을 개발하게 되면 농업수자원확보를 위한 관리방안 선정을 위한 정책수립에 활용될 수 있으며 비점오염 배출을 최소화시켜 수질의 개선에 기여할 뿐만 아니라 우리나라 농업에 적합한 최적영농관리기술을 개발 할 수 있을 것으로 사료된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1095-1103
• /
• 2014

A packaging and distribution system for transferring individual live squids at low temperature was developed and compared to a conventional bulk container system. Ten live squids in individual packages were stored in a large container at low temperature ($0{\sim}10^{\circ}C$). Live squids in individual packages at $6^{\circ}C$ showed a survival rate of 84% up to 72 hours, after which the survival rate decreased. However, the survival rate remained at 60% up to 120 hours. Further, the squids survived up to a maximum of 7 days. Optimum temperature was $5^{\circ}C$, and the survival rate of the packages was 70% when stored at $5^{\circ}C$ for 96 hours. A distribution test was carried out using a refrigerator truck at $5^{\circ}C$, and the results showed a 100% survival rate up to 16 hours and over 90% survival rate after 20 hours. A rectangular container was the most favorable when loading the container into the refrigerator truck. In testing the required volume of supplied seawater, 100% survival rate was observed over 15 hours with 20 L of sea water or more. Therefore, a single squid needed 2 L of seawater. After refrigerator truck transportation, optimum temperature for fish tank storage was $5^{\circ}C$, at which the survival rate was over 90% up to 72 hours. Using a refrigerator truck at $5^{\circ}C$, live squids survived up to 7 days, maintaining marketability.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2011-2013
• /
• 2004

본 논문은 그루빙(grooving),타이닝(tinning),텍스쳐(texture) 등의 포장 도로의 표면 상태를 고성능의 레이저 변위센서를 사용하여 정밀하게 측정하고, 측정한 표면 상태를 객관적으로 평가하는 장비 개발에 관한 논문이다. 본 논문에서는 실제 평가 장비 차량을 만들기에 앞서 전체 시스템을 설계하고, 실내에서 차량과 도로의 모사 장비를 만들어 실험하였다. 본 실험에서는 오실로스코프와 DAQ (Data Aquisition) 보드를 사용하였다. LabView로 선호처리 프로그래밍을 하여 컴퓨터 화면에 GUI 형태로 나타내었다. 측정 데이터는 컴퓨터의 저장 공간에 저장하여 후처리를 가능하게 하였다. 또한, 실제 평가 장비 차량에 장착하게 될, GPS(Global Positioning System) 시스템으로 부터 실시간으로 평가 장비 차량의 이동거리 데이터를 얻었다. 실험 결과 차량이 80km/h로 주행할 때 도로 표면 타이닝의 폭과 깊이가 평균 9.67% 오차를 보였으며, 이동거리는 0.03% 이내의 오차를 보여 만족할 만한 결과를 얻었다.