• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.225-230
• /
• 2016

Dam is built to supply water necessary for life stably and reduce the damage caused by heavy rains. Recently there has been required the analysis and utilization of spatial information on the area around the dam because construction of the dam gives a great impact on the environment of the surrounding area. In this study, we build spatial information about the submerged district due to dam construction using drone and propose the effective method for analysis of the spatial information. As a result, orthoimage and DSM of study area were constructed effectively. Change of submerged district of this area was calculated according to the analysis of spatial information. Building and analyzing spatial information carried out in this study are expected to be utilized as the basis in related fields.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.4
• /
• pp.74-84
• /
• 1997

최근. 급격한 도시화 현상으로 인한 불투성 지표의 증가는 도시의 생태적 측면에 변화를 일으키고 있으며, 도시의 온난화 현상. 도시의 사막화 현상 등이 그 결과로 나타나고 있다. 특히, 분투수성 지표가 많은 도시에서는 그 수문학적 기능이 투수성 지표에 의존하고 있으며, 도시의 투수성 지표에는 오픈 스페이스와 주변의 생산녹지 등이 있다 이러한 관점에서 투수성 지표에 관한 연구가 필요함에도 불구하고 많지 않았고, 대부분 포인트별 연구였다. 본 연구는 도시 내의 수문기능 환경변화개선에 관한 기초자료로 동경의 대표적 도시공원인 코카네이 (소금정) 공원과 동경 근교의 치바현 (천엽현)위치한 치바(천엽)대학 부속 카시와 (상) 농장을 대상지로 선정 토양환경기능의 간접적 지표가 되는 토양경도를 나카야마식(산중식) 토양경도 계륵 사용하여 5120 Cm의 라인위에 10 Cm간격으로 512개씩 코카네이(소금정) 공원에서 9라인. 카시와(상) 농장에서 7라인을 공간별로 측정하고. 그 측정값을 다중비교검정과 Bartlett's 검정에 의하여 검정후에, 랜덤 데이타분석에 적합한 FFT(Fast Fourier Transform)를 사용하여 분석하였다 본 연구의 측정값을 다중비교검정과 Bartlett's 검정한 결과, 유의타가 없었고, 각 데이터를 분석한 결과. 공원의 9라인과 농장의 7라인은 분석 그래프의 유형에 의해 각각 2가지로 분류되었고, 전체적으로는 3가지로 분류할 수 있었다 특히 공원과 농장의 분석 그래프에서는 수평 방향으로의 변화에 대한 수직방향의 변화가 비슷한 스펙트럼이 공통적으로 나타났고. 각각 최대 값은 다르나 제1주기 부분에서는 답압과 같은 인위적인 요인에 의한 논은 수직방향의 스펙트럼 변화가 관찰되었다. 또한, 강우가 녹지의 경도변화에 미치는 가를 관찰하기 위하여 강우전과 강우후에 같은 라인(Line1과 Line2)을 측정하여 분석한 결과, 측정값의 평균에서는 차이를 보였으나. 주기의 변화는 거의 없었다. 전체적으로 분석 그래프에서는 공간별로 스펙트럼의 수평방향에 대한 수직방향의 변화량의 차이는 보였으나 비슷한 주기를 나타냈고, 가작의 유형은 공원의 녹지공간(lawn-area)과 나지공간(bare-area)으로, 농장을 녹지공간(lawn-area)과 경작공간(field-area)으로 분류할 수있었다. 종합적으로 녹지를 지질학적 구조의 고유한 특징이 아닌. 답압 등과 같은 인위적인 요인에 따른 속성들에 의하여 나타나는 스펙트럼의 분석을 통하여 녹지공간(lawn-area). 나지공간(bare-area)그리고, 경작공간(field-area)으로 분류할 수 있었다..

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.443-449
• /
• 2018

Acquiring indoor point cloud, using SLAM (Simultaneous Localization and Mapping) based mobile mapping system, is an element progress for development of as-build BIM (Building Information Model) for the maintenance of the building. In this research we proposed a simulation-based target geometry determination for extrinsic calibration of multiple 2D laser scanning mobile system. Four different types of calibration sites were designed: (1) circle type; (2) rectangle type; (3) double circle type; and (4) double rectangle type. Based on the measurement values obtained from each simulated calibration site geometry, least squares solution based extrinsic calibration was derived. As a result, the rectangle type geometry is most suitable for extrinsic calibration of this system. Also, correlation values between extrinsic calibration parameters were high, and calibration results were distinct according to the calibration sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.411-416
• /
• 2020

Field investigations of forests are carried out by writing measured data by hand, and it is a hassle to reorganize the results after a field survey. In this study, a method using object modeling and augmented reality (AR) was applied in a test forest to increase the efficiency of a field investigations. Using a 3D laser scanner, data on were acquired 387 trees within an area of 1 ha at the study site. The coordinates, height, and diameter were calculated through object extraction and modeling of a tree. The proposed can reduce the time required to acquire data in the field and can be used as basic data for building related systems. In addition, the modeling results of trees and a survey using GNSS and AR techniques can be used check coordinates, labor, and attribute information, such as the chest height diameter of the trees being surveyed in the field. The shortcomings of the survey method could be improved. In the future, the method could greatly improve the efficiency of tree surveys and monitoring by reducing the manpower and time required for field surveys.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.249-256
• /
• 2022

In the case of Drone Photogrammetry, the "pixel to point tool" module of Metashape, Pix4D Mapper, ContextCapture, and Global MapperGIS, which is a simple software, are widely used. Each SW has its own logic for the analysis of aerial triangulation, but from the user's point of view, it is necessary to select a SW by comparative analysis of the coordinate values of geospatial information for the result. Taking aerial photos for drone photogrammetry, surveying GCP reference points through VRS-GPS Survey, processing the acquired basic data using each SW to construct ortho image and DSM, and GCPSurvey performance and acquisition from each SW The coordinates (X,Y) of the center point of the GCP target on the Ortho-Image and the height value (EL) of the GCP point by DSM were compared. According to the "Public Surveying Work Regulations", the results of each SW are all within the margin of error. It turned out that there is no problem with the regulations no matter which SW is included within the scope.

• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.1-18
• /
• 2010

I'd like to introduce a teaching method to improve learning efficiency. Most students are likely to ignore what they don't understand in the class of a course. The subject of Occlusion is essential to understanding prosthodontic and orthodontic subjects. It is necessary to let students know and review what they don't understand among parts of a chapter in the course of Occlusion. Therefore I look over the examination papers after every examination and input the problems that each student didn't solve into the C-language computer program and print the list of the contents that each student must study particularly. I give the lists to students and let them review and present their own weak parts of a chapter in the course of Occlusion in the next class. This teaching method leads to improvement in learning and is helpful to students as well as lecturers.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.547-553
• /
• 2016

Black carbon (BC) contained in particulate matter (PM) originating from the exhaust gases of ships' diesel engines has been receiving great attention as a cause of glacial melting and warming in the polar regions. In this study, we took samples from various locations of PM emitted from the training ship (T/S) HANBADA's main engine, in cooperation with the Korea Maritime and Ocean University. We analyzed the structure and characteristics of these samples using high-resolution transmission electron microscopy (HR-TEM) and applied our findings as fundamental research for developing PM reduction technology. We also employed our results to determine appropriate preemptive action to meet upcoming PM/BC regulations. In addition, we confirmed the emission trend of pollutants from exhaust gases under various engine operating conditions using an exhaust gas analyzer. Results obtained from the analysis of HR-TEM images showed that the structure of the PM is chain-like wispy agglomerates consisting of a number of individual spherical particles. As the sampling location was moved away from the turbo charger (T/C) towards the funnel, more condensates were observed at a low temperature and the molecular structure of the PM lost its characteristic BC structure as an amorphous structure gradually appeared. Furthermore, through the analysis of exhaust gases, we predicted a decrease in PM concentration in the exhaust stream as engine rpm increase.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.1
• /
• pp.55-88
• /
• 2014

In this study, we examined the use of cosmetics among adolescents in our country and their purchasing behavior, as the use of cosmetics has increasingly been prevailing in the younger generation. The aims of this study were to investigate the state of the youth cosmetics market, to grasp the needs of youth and ultimately to suggest the right directions for the youth cosmetics market. The subjects in this study were 1,092 boys and girls from 10 selected secondary schools in Seoul. After a survey was conducted, the answer sheets from 1,074 respondents were gathered, and the collected data were analyzed by the statistical package (SPSS WIN 18.0). The vast majority of the teens participated in the survey were answered to use basic cosmetics daily, and there was a gradual increase in the frequency that they used color cosmetics. They started to use cosmetics earlier in ages than the older generations. Most of them were in trouble due to acne, and the most dominant way to get rid of their skin troubles was by using cosmetics. The most common place at which they purchased cosmetics were brand shops, and they gave priority to the function of the products when they bought cosmetics. The adolescents were still told by their schools to abstain from using cosmetics, and that was the case for social climate as well. Yet they definitely wanted to be allowed to use cosmetics.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.243-249
• /
• 2019

The purpose of this study is to analyze the reflectance of bed materials according to changes in the water level using a drone-based hyperspectral sensor. For this purpose, we took hyperspectral images of bed materials such as soil, gravel, cobble, reed, and vegetation to compare and analyze the spectral data of each material. To adjust the water level, we constructed an experimental channel to control the discharge and installed the bed materials within the channel. In this study, we configured 3 cases according to the water level (0.0 m, 0.3 m, 0.6 m). After the imaging process, we used the mean value of 10 points for each bed material as analytical data. According to the analysis, each material showed a similar reflectance by wavelength and the intrinsic reflectance characteristics of each material were shown in the visible and near-infrared region. Also, the deeper the water level, the lower the peak reflectance in the visible and near-infrared region, and the rate of decrease differed depending on the bed material. We expect the intrinsic properties of these bed materials to be used as basic research data to evaluate river environments in the future.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.189-194
• /
• 2019

Forest investigation is the basic data for forest preservation and forest resource development, and periodical data acquisition and management have been performed. However, most of the current forest investigations in Korea are surveys to grasp the current status of forests, and various applications have not been made as geospatial information. In this study, the unmanned aerial scanner was used to acquire and process data in the forest area and to present an efficient forest survey method through analysis of the results. Unmanned aerial scanners can extract ground below vegetation, effectively creating DEM for forest management. It can be used as geospatial information for forest investigation and management by generating accurate topographical data that is impossible in conventional photogrammetry. It can also be used to measure distances between power lines and vegetation or manage transmission lines in forest areas. The accurate vertical distance measurement for vegetation surveys can greatly improve the accuracy of labor measurement and work efficiency compared to conventional methods. In the future, the use of unmanned aerial scanners will improve the data acquisition efficiency in forest areas, and will contribute to improved accuracy and economic feasibility compared to conventional methods.