• Resources Recycling
• /
• v.29 no.5
• /
• pp.73-80
• /
• 2020

In order to develop a process for the recovery of valuable metals from spent LiBs, solvent extraction experiments were performed to separate Cu(II) and/or Co(II) from synthetic hydrochloric acid solutions containing Li(I), Mn(II), and Ni(II). Commercial amines (Alamine 336 and Aliquat 336) were employed and the extraction behavior of the metals was investigated as a function of the concentration of HCl and extractants. The results indicate that HCl concentration affected remarkably the extraction efficiency of the metals. Only Cu(II) was selectively at 1 M HCl concentration, while both Co(II) and Cu(II) was extracted by the amines when HCl concentration was higher than 5 M, leaving the other metal ions in the raffinate. Therefore, it was possible to selectively extract either Cu(II) or Co(II)/Cu(II) by adjusting the HCl concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.603-610
• /
• 2016

This work studies the synthesis of birnessite (${\delta}-MnO_2$), a catalyst of oxidative-coupling reactions, from the powder of spent alkaline manganese batteries (SABP, <8 mesh) and evaluate its reactivity for 1-naphthol (1-NP) removals. Manganese oxides using commercial reagents ($MnSO_4$, $MnCl_2$) and the acid birnessite (A-Bir) by McKenzie method were also synthesized, and their crystallinity and reactivity for 1-NP were compared with one another. 96% Mn and 98% Zn were extracted from SABP by acid leaching at the condition of solid/liquid (S/L) ratio 1:10 in $1.0M\;H_2SO_4+10.5%\;H_2O_2$ at $60^{\circ}C$. From the acid leaching solution, 69% (at pH 8) and 94.3% (pH>13) of Mn were separated by hydroxide precipitation. Optimal OH/Mn mixing ratio (mol/mol) for the manganese oxide (MO) synthesis by alkaline (NaOH) hydrothermal techniques was 6.0. Under this condition, the best 1-NP removal efficiency was observed and XRD analysis confirmed that the MOs are corresponding to birnessite. Kinetic constants (k, at pH 6) for the 1-NP removals of the birnessites obtained from Mn recovered at pH 8 (${Mn^{2+}}_{(aq)}$) and pH>13 ($Mn(OH)_{2(s)}$) are 0.112 and $0.106min^{-1}$, respectively, which are similar to that from $MnSO_4$ reagent ($0.117min^{-1}$). The results indicated that the birnessite prepared from the SABP as a raw material could be used as an oxidative-coupling catalyst for removals of trace phenolic compounds in soil and water, and propose the recycle scheme of SAB for the birnessite synthesis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.40-50
• /
• 2012

The electrification of the waste heat of stack is necessary to enhance the efficiency of fuel cell system. For this purpose, the hybrid SOFC/GT/ST system is suitable. The purpose of this work is to predict the performance of methane fueled SOFC/GT/ST hybrid power system and to analyze the influence of operating temperature of stack, current density of stack, and gas turbine pressure ratio. According to the analysis, it is proved that the SOFC/GT/ST hybrid system suppress the rapid decrease in efficiency and lead to the significant improvement of efficiency as compared with SOFC system.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.67-76
• /
• 2017

In order to efficiently recycle waste industrial nickel-cadmium batteries, anodic and cathodic materials were crushed by a cut mill and classified by sieves. We used wet magnetic separation method for eliminating iron components from the crushed powders. In addition, the acid leaching test for the obtained anode and cathode powders was carried out under various conditions by means of the wet process. At the optimum leaching conditions with 2.0 M $H_2SO_4$ at $90^{\circ}C$, 15 wt $H_2O_2$ and L/S=20 for 3 hours, the leaching efficiency of nickel and cadmium was 99%, respectively.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.23-31
• /
• 2019

Cementation is one of economical and efficient recycling method precipitating the metal ion in solution by adding another active metal. In this study for optimizing cadmium recovery efficiency, it was performed as a function of the effect of pH, temperature, particle size, and input amount of zinc in 0.1 M $CdSO_4$ solution and Ni-Cd battery leaching solutions, respectively. The particle size of zinc and temperature were key factors for Cd cementation and it was confirmed that the input amount of 2.6 of Zn/Cd ratio using granular-type zinc was optimal condition for selective Cd recovery efficiency at $25^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.61-67
• /
• 2022

A metal salt solution was prepared from valuable metals (Ni, Co, Mn) recovered from a scrap of waste lithium secondary batteries, and an NCM811 precursor was synthesized from the solution. The effect on precursor formation according to reaction time was confirmed by SEM, PSA, and ICP analysis. Based on the analysis results, the electrochemical properties of the synthesized NCM811 precursor and the commercial NCM811 precursor were investigated. The Galvano charge-discharge cycle, rate performance, and Cycle performance were compared, and as a result, there was no significant difference from commercial precursors.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.423-429
• /
• 2011

This paper deals with the observer-based decentralized fuzzy controller design for nonlinear interconnected system for PEMFC. The nonlinear interconnected system is represented by a Takagi-Sugeno (T-S) fuzzy model. Based on T-S fuzzy interconnected system, the fuzzy observer and the decentralized fuzzy controller are designed. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain s are obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.464-468
• /
• 2005

산업활동으로 인해 발생하는 슬래그 등의 폐기물을 적절히 처리하는 방법으로서는 저비용 처리형태와 자연계에서 슬래그 등의 특성을 고려한 Filter 기능을 수행할 수 있도록 수질이 악화된 하천이나 정체수역에 투입시켜 수질을 개선시킬 수 있는 방법의 도입이 필요하다. 현재 POSCO에서 발생하는 슬래그와 폐콘크리트의 화학적 성분은 주로 $CaO,\;SiO_2,\;Al_2O_3,\;Fe_2O_3$ 등으로 이루어져 있으며, 침전유발물질 및 흡착성물질이 공존하고 있다. 다공질 형태의 비표면적을 가지고 있어서 정화용 필터로 이용하기에 좋은 이점을 가지고 있다. 슬래그나 폐콘크리트를 Mattress/Filter 채움재 및 수질정화용 여재로 활용하면 폐기물처리, 자원 재활용 그리고 수질 환경 개선의 세 가지 효과를 동시에 얻을 수 있는 방법이 된다. 본 연구에서는 슬래그와 폐콘크리트를 활용한 정체수역에서 정화시스템의 정화특성을 조사하기 위하여 유입수와 유출수의 pH, 용존산소, 질소, 인 등을 측정하여 비교하였다. 수질개선을 위한 Mattress/Filter 시스템의 기본개념은 하천의 오염된 물이 Mattress/Filter의 공극사이를 통과하면서 채움재에 형성된 생물막이 수질 개선과정에서 나타나는 접촉작용, 생물 흡착작용, 생물산화의 분해작용 등을 촉진시키도록 하였다. Mattress/Filter를 이용한 수중 수질개선시스템에서 채움재로 제철폐기물인 슬래그와 건설폐기물인 폐콘크리트를 사용함으로써 Mattress/Filter의 다공성 및 넓은 표면적이라는 특성에 따른 물리적$\cdot$화학적$\cdot$생물학적 작용이 촉진되고 있음을 확인할 수 있었으며, 그 결과 정체수역에 설치한 Mattress/Filter는 다공질 속에서 쉽게 생물막을 형성시키고 유기물의 흡착을 촉진시켜 오염물질을 정화하는데 필요한 자정작용의 효과 증대와 수질개선을 촉진시킬 수 있는 자연생태적 하천정화시스템임을 확인할 수 있었다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.34-41
• /
• 2022

Smelting reduction of spent lithium-ion batteries results in metallic alloys, slag, and dust containing Li(I). Precipitation of Li₂CO₃ was performed using the synthetic leachate of the dust. Herein, the effects of the precipitant and addition of non-aqueous solvents on the precipitation of Li(I) were investigated. Na₂CO₃ was a more effective precipitating agent than (NH₄)₂CO₃ owing to the hydrolysis reaction of dissolved ammonium and carbonate. The addition of acetone or ethanol improved the Li(I) precipitation percentage for both the precipitants. When using (NH₄)₂CO₃, the Li(I) precipitation percentage increased at a solution pH of 12. Under the same conditions, the Li(I) precipitation percentage using Na₂CO₃ was much higher than that using (NH₄)₂CO₃.