• Resources Recycling
• /
• v.19 no.4
• /
• pp.13-18
• /
• 2010

Effort of reducing wastes and their recycling is increasing in worldwide. Especially, extreme care for alkali recycling is required because of its environmental pollution and its corrosive characteristics. In order to manage alkali wastes effectively, it is necessary to make quality standards for recycling products from the alkali wastes because there are no quality specifications yet. In this study, we selected several recycling candidates from the alkali wastes based on the analysis of the most recent data of the various industrial sites. As a result, the recycling candidates from the alkali wastes are sodium hydroxide, aluminum sulfate, poly aluminum chloride. It is believed that the proper management system for waste products is required in governmental point of view and it propagates positively for resolving various environmental issues.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.351-359
• /
• 2013

Blast furnace slag (BFS) have many advantages that are related to effective value improvement on applying to concrete while side effects of blast furnace slag also appear. Thus, research team conducted an experiment with high volume slag to see if the attribute of waste alkali accelerator for mixing rate, mixed use of NaOH and $Na_2SiO_3$, and early strength agent for mixing rate for replacement ratio and for the types of the stimulants in order to increase the use of blast furnace slag1s powder. As the result of the experiment, when it comes to compression strength, all of the alkali stimulants have been improved as the replacement rate increases except for sodium hydroxide. Among the alkali stimulants, sodium silicate was high on dynamic elastic modulus and absorption factor. In case of early strength agent, the mix of mixing 1.5% and blast furnace slag 75% have showed high strength enhancement. In event of Waste Alkali accelerator, it has showed different consequences for each experiment.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.354-359
• /
• 1998

본 연구에서는 분획분자량이 RO막과 UF막 사이에 있는 NF막(Nanofiltration Membrane) 의 특성을 이용하여 앞서의 기초연구$^{1)}$ 를 바탕으로 현장적용을 위한 소현장규모의 실험을 수회 진행하여 실제로 NF막 공정기술의 현장실용화를 위해 검토되어야 할 사항 및 운전시간에 따른 막투과량 거동의 변화 및 온도의존성 등을 검토하였고, 이와 병행하여 염색공장, 염색공단조합, 폐알칼리 수거회사와의 면담을 통하여 머어서 공정 및 머어서 폐수 관련 현황을 조사하여 이를 토대로 분리막 공정의 경제성에 주요 역할을 하는 고농도 가성소다 폐수 수집을 위한 수세방법을 소개하였고 본 기술의 국내 실용화를 위한 문제점 파악 및 현 상황에서의 실용화 최적 방안을 제안하여 보았다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1572-1578
• /
• 2007

The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.