• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1196-1201
• /
• 1997

As a basic study to develop low-salted fermented anchovy, rates of salt penetration into anchovy muscle, patterns of protein degradation and changes in water activity and transfer was analyzed after brining at various salt (NaCl) concentration. The salt penetration curves followed first order. kinetics. The rate constant (k) increased from 0.018 (10% NaCl solution) to 0.051 (saturated). Water activity was reduced from 0.93 (10% NaCl solution) to 0.77 (saturated). Protein degradation during brining was Somewhat occurred in 10% NaCl solution but not in satutrated solution. Water content of anchovy muscle were 74% (w/w), 65% and 58% when 10%, 20% and saturated NaCl solution were used, respectively. This result indicated that as NaCl content of brining solution was increased, the amount of water transfer also occurred. Weight of anchovy increased at 10% NaCl solution and decreased at 20% and saturated NaCl solution. The loss of anchovy solid mash during brining was calculated as 30% after 36 hr brining.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.83-89
• /
• 2000

Bentonite has been considered as a liner material to restrict the release of hazardous heavy metals from the landfill. The adsorption of copper onto a domestic bentonite was studied to provide the adsorption isotherm and the effect of solution chemistry and temperature. The copper adsorption was fitted well to a Freundlich isotherm, in which Freundlich constants and correlation coefficient were calculated to be $K_F=1.18$, n=1.65, and $r^2=0.97$, respectively. The distribution coefficients ($K_d$) for the adsorption of copper decreased with increasing initial copper concentration. The $K_d$ increased with increasing the pH of solution, and drastically increased at pH > 5.3 because of precipitation of most copper species. As the ion strength of $Na^+$ in solution increased the $K_d$ decreased, while it increased with increasing the concentration of $SO_4{^{2-}}$ in solution. An increase in the temperature of experimental solution decreased the $K_d$ values.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.138-146
• /
• 2009

The crude polysaccharide fraction from fruit body of Auricularia auricula were obtained by using hot water extraction and ethanol precipitation. As the crude polysaccharide fraction contained the brownish dark colored compounds, the adsorption study of pigments from the crude polysaccharide using activated carbon was carried out. The pigment compounds showed an absorption characteristic with $\lambda_{max}$ of 230 nm and the absorbance at 230 nm was taken as color intensity. Adsorption capacity of pigment depended on increase of the activated carbon to sample loading ratio. The adsorption capacity increased with increase of pH and temperature in the pH range of 3.0-7.0 and temperature range of 25-40$^{\circ}C$, but decreased in the temperature range of 40-70$^{\circ}C$. The optimum capacity was obtained at addition of 16.7 mg activated carbon per mL sample solution (concentration = 3 mg/mL) at pH of 7.0 and temperature of 40$^{\circ}C$. Treatment for 10 min was sufficient to achieve the 80% decolorization and 1.25 fold purification of polysaccharide. Langmuir isotherm and pseudo second-order kinetic model provided the best fitting for adsorption of the brownish dark colored compounds onto powdered active carbon. The activation energies of adsorption from the Langmuir isotherm parameter in the ranges of 25-40$^{\circ}C$ and 40-70$^{\circ}C$ was -2.54 and 4.38 kcal/g, respectively. The results of low activation energy also indicated that the adsorption process was a physical adsorption which was controlled by diffnsion.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.565-573
• /
• 2021

Isotherms, kinetics and thermodynamic properties for adsorption of Brilliant Green(BG), Quinoline Yellow(QY) dyes by activated carbon were carried out using variables such as dose of adsorbent, pH, initial concentration, contact time, temperature and competitive. BG showed the highest adsorption rate of 92.4% at pH 11, and QY was adsorbed at 90.9% at pH 3. BG was in good agreement with the Freundlich isothermal model, and QY was well matched with Langmuir model. The separation coefficients of isotherm model indicated that these dyes could be effectively treated by activated carbon. Estimated adsorption energy by Temkin isotherm model indicated that the adsorption of BG and QY by activated carbon is a physical adsorption. The kinetic experimental results showed that the pseudo second order model had a better fit than the pseudo first order model with a smaller in the equilibrium adsorption amount. It was confirmed that surface diffusion was a rate controlling step by the intraparticle diffusion model. The activation energy and enthalpy change of the adsorption process indicated that the adsorption process was a relatively easy endothermic reaction. The entropy change indicated that the disorder of the adsorption system increased as the adsorption of BG and QY dyes to activated carbon proceeded. Gibbs free energy was found that the adsorption reaction became more spontaneous with increasing temperature. As a result of competitive adsorption of the mixed solution, it was found that QY was disturbed by BG and the adsorption reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.192-199
• /
• 2020

The blower erosion phenomenon was investigated to develop a long-life blower with a volume flow rate of 10,000 ㎥/min with the required total pressure efficiency of 83% or more. The blower performance and blower erosion were predicted through numerical analysis by computational fluid dynamics(CFD). The conditions used for numerical analysis were an air volume of 16,200 ㎥/min, a rotation speed of 893 rpm, and a temperature of 330℃. The specific gravity, particle size, and amount of the dust was 3.15, 90 ㎛~212 ㎛, and is 265 kg/min, respectively. To examine the effects of a dust deflector on erosion, erosion analysis was performed by comparing the models with and without a dust deflector. Numerical analysis showed that when the dust deflector is installed, the average tended to decrease by 167% in the impeller and 133% in the boss. CFD using the Finne's model for erosion revealed a parallel restitution coefficient of 1 and a perpendicular restitution coefficient of 0.1. The blower performance of case 5 was 691.7 mmAq, and the efficiency was 83.3% when the rotation speed and the air volume flow rate were 880 rpm and 16,200 ㎥/min, respectively.

• Journal of The Korean Association For Science Education
• /
• v.27 no.7
• /
• pp.663-675
• /
• 2007

Chemical reactions in cells are so complicated and abstract that students have difficulty in understanding them. In this study, classes with the application of systematic analogies used at the interpretation of experimental results were taught to 10th-grade students in order to help them to understand the concept of enzymes, which play an important role in chemical reactions in cells. Effects of the classes on their understanding of the concept of enzymes and the role of systematic analogies were analyzed. The gap of understanding between the test group and the control group was significant at 0.05, indicating that systematic analogies are effective for students' understanding of the concept of enzymes. Looking into the concept of enzymes by individual element, the effect of systematic analogies was shown to be large for equilibrium-like processes, such as the enzyme structure change caused by temperature and pH; and the continuous and random actions of enzymes, which students have difficulty in understanding. For these processes, systematic analogies played a positive role in improving their conceptual status. The visualizations and familiarity of analogs increased their intelligibility regarding the concept of enzyme. Also, the systematic analogies increases their plausibility by helping to connect phenomena, taking place in the enzyme reaction experiments, with scientific concepts as scaffold. Accordingly, it was possible to explain experimental results as scientific concepts in a consistent manner. In addition, analogies familiar to students played a positive role from the affective perspective by promoting students' interest and helping them to approach hard scientific concepts.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.725-733
• /
• 2012

Effects of postharvest 1-methylcyclopropene (1-MCP) treatment, controlled atmosphere (CA) storage, and shelf temperature on quality of 'Gamhong' apples were analyzed during export simulation. Fruits were harvested at the optimum maturity for long-term storage, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP for 16 hours, and then stored for 6 months under air and CA conditions at $0^{\circ}C$. Poststorage export procedure was performed by applying additional 2-week refrigerated storage and 7-day shelf-life test at 7 and $20^{\circ}C$, which simulated container shipment and local distribution, respectively. After storage and during export simulation, rates of respiration and ethylene evolution were significantly lower in 1-MCP treated and CA-stored apples. For the reduction of respiration, CA storage was more effective than 1-MCP treatment. Soluble solids content was maintained higher in 1-MCP treated apples, while titratable acidity was maintained better both in the 1-MCP treated and CA-stored apples. Effects of 1-MCP treatment and CA storage were highly significant in maintaining flesh firmness and sensory texture ratings. Additive effects from combined application of 1-MCP treatment and CA storage were occasionally observed. Shelf temperature during the local distribution simulation seemed not to significantly influence quality changes only showing limited effects on flesh firmness. Overall results suggest that storage potential of 'Gamhong' apples is shorter than 4 months in control fruit under refrigerated air conditions, whereas the potential can be extended to longer than 6 months by 1-MCP treatment and CA storage. Postharvest program should be provided considering the time of export, i.e. period of storage, and duration of local distribution.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.784-792
• /
• 2010

Mild heat treatment was applied to ginger rhizomes to achieve shelf-life extension for fresh minced ginger. The rhizomes were treated at 45, 50, 55, or $60^{\circ}C$ for different periods of time, minced, and stored at $10^{\circ}C$ for 9 days. Microbial levels in minced fresh ginger decreased with increases in temperature and duration of heat treatment. The non-treated and treated samples did not significantly differ in color at the initial stage of storage. Changes in color were detected after 3 days, and accelerated after that time. The ${\Delta}E$ value of control samples reached 12.42, whereas that of treated samples (except when $45^{\circ}C$ was applied for 60 min) ranged from 7.67 to 10.96, after 9 days. There was no significant difference in initial pH value between control (pH 6.09) and treated (pH 6,046.20) samples. The pH of control samples increased to 8.02 after 9 days, whereas pH values of samples treated at $50^{\circ}C$ and $60^{\circ}C$ ranged from pH 6.807.83 after 9 days. The percentage of control drip was 25.65% at the initial stage of storage, which was lower than those of treated samples. Drip increased to 38.63% in the control and to 34.20~38.44% in treated samples after 9 days. The sensory characteristics of the control samples were similar to those of treated samples at the initial stage of storage. After 6 days, the control and some treated samples developed off-flavors and discoloration. However, samples treated at $50^{\circ}C$ for 60 min retained favorable quality characteristics for 9 days after storage.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.667-675
• /
• 2020

An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.34-45
• /
• 2004

This paper describes the textural relations of mantle xenoliths and fluid inclusions in mantle-derived rocks found in alkaline basalts from Jeju Island which contain abundant ultramafic, felsic, and cumulate xenoliths. Most of the ultramafic xenoliths are spinel-lherzolites, composed of olivine, orthopyroxene, clinopyroxene and spinel. The felsic xenoliths considered as partially molten buchites consist of quartz and plagioclase with black veinlets, which are the product of ultrahigh-temperature metamorphism of lower crustal materials. The cumulate xenoliths, clinopyroxene-rich or clinopyroxene megacrysts, are also present. Textural examination of these xenoliths reveals that the xenoliths are typically coarse grained with metamorphic characteristics, testifying to a complex history of evolution of the lower crust/upper mantle source region. The ultramafic xenoliths contain protogranular, porphyroclastic and equigranular textures with annealing features, indicating the presence of shear regime in upper mantle of the Island. The preferential associations of spinel and olivine with large orthopyroxenes suggest a previous high temperature equilibrium in the high-Al field and the original rock-type was a Al-rich orthopyroxene-bearing peridotite without garnet. Three types of fluid inclusions trapped in mantle-derived xenoliths include CO$_2$-rich fluid (Type I), multiphase silicate melt (glass ${\pm}$ devitrified crystals ${\pm}$ one or more daughter crystals ＋ one or more vapor bubbles) (Type II), and sulfide (melt) inclusions (Type III). C$_2$-rich inclusions are the most abundant volatile species in mantle xenoliths, supporting the presence of a separate CO$_2$-rich phase. These CO$_2$-rich inclusions are spatially associated with silicate and sulfide melts, suggesting immiscibility between them. Most multiphase silicate melt inclusions contain considerable amount of silicic glass. reflecting the formation of silicic melts in the lower crust/upper mantle. Combining fluid and melt inclusion data with conventional petrological and geochemical information will help to constrain the fluid regime, fluid-melt-mineral interaction processes in the mantle of the Korean Peninsula and pressure-temperature history of the host xenoliths in future studies.