• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.214-214
• /
• 2010

Indium-tin-oxide(ITO)는 평판디스플레이 산업이 성장함에 따라 그 수요는 계속 늘고 있지만 세계적으로 In의 매장량의 한계로 그 단가가 매우 높다. 또한 ITO는 플렉시블 디스플레이에 적용함에 있어서 고온 공정으로 인해 많은 단점을 보이고 있어 이를 대체할 새로운 투명전극의 개발이 활발히 진행되고 있다. 본 연구에서는 IZTO($In_2O_3$:ZnO:$SnO_2$=80:10:10 wt.%)의 In 량을 절감한 조성의 타겟을 제조하였다. 그리고 유리기판 위에 IZTO 박막을 펄스 DC 마그네트론 스퍼터링을 이용하여 증착압력과 활성 산소의 분압을 변화시키며 증착하였다. 증착압력의 변화는 3mTorr~8mTorr 범위에서 제어하였고 활성 산소의 분압은 0%~3% 범위에서 제어하였으며 기판의 온도의 제어 없이 상온에서 증착하였다. 증착한 박막은 전기적, 광학적 및 구조적 특성 등을 조사하였다. 증착압력 6mTorr와 산소분압 2%의 조건에서 비저항은 $5.07{\times}10^{-4}\;({\Omega}{\cdot}cm)$, 캐리어 농도는 $2.96{\times}10^{20}(cm^{-3})$, 이동도는 $41.6(cm^{-2}/Vs)$로 가장 좋은 전기적 특성을 보였다. 박막의 투과율을 측정한 결과 평균 85% (400nm~800nm)이상의 우수한 광학적 특성을 보였다. 또한 이 IZTO 박막을 이용하여 OLED 소자를 제작하여 그 특성을 조사하였다. 조사 결과 플렉시블 디스플레이 분야에서 IZTO 박막은 In 절감효과와 상온 공정에서 우수한 투명전극 특성을 보여 ITO를 대체할 물질로 가능성을 보여주었다.

• Smart Media Journal
• /
• v.12 no.3
• /
• pp.93-101
• /
• 2023

In this paper, we investigate the relationship between a company's Intellectual Property (IP) portfolio strength and its success in obtaining venture funding in the Korean digital media & entertainment industry. Using data from 685 Korean digital media & entertainment companies registered in Crunchbase, a global database provider of venture funding information, we found that a strong IP portfolio is positively associated with funding success. Furthermore, our study revealed that the effect of IP portfolio strength on funding success is stronger for younger companies, suggesting that IP portfolio is more critical for firms that have less reputation and track record.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.94-104
• /
• 2009

It is urgently required to develop the production of fermentation-heat energy from the waste agricultural and forest biomass and its effective heat exchanging system for the supply of warm water to rural households and greenhouses. In this study 3 helical-type and 1 plate-type heat exchangers using 3 different waste biomasses [e.g. hardwood (HW) sawdust (100%), softwood (SW) sawdust : HW sawdust (50 : 50) and HW sawdust : grass (90 : 10)] were applied in order to find out the best heat recovery system. The heat exchanger was basically considered to improve the overall heat recovery efficiency, to minimize heat loss and to simplify manufacturing, assembling and breaking up the fermenting beds. The helical-type heat exchanger (HX-H3) installed in fermenting bed of HW sawdust : grass (90 : 10) showed relatively higher temperature profiles, in particular mid- and upper-parts than lower and surface parts during 45-day fermentation process. The maximum temperature was ranged from $40^{\circ}C$ to $65^{\circ}C$ with average $60^{\circ}C$. The water temperature of tank outlet was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. By the way plate-type one (HX-P) installed in same biomass compositional fermenting bed showed $64.5{\sim}76.5^{\circ}C$ at center part, and $43{\sim}56^{\circ}C$ and $42{\sim}58^{\circ}C$, water tank and tank outlet temperatures, respectively, during 100 day measurement. It could be concluded that the plate-type heat exchanger (HX-P) provides not only the effective heating for the rural households and greenhouses, but also having the best heat recovery performance, easy manufacturing, assembling and breaking up the systems.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.1-14
• /
• 2018

As interest and consumption of luxury goods have become more popular, luxury goods market is growing rapidly. Consumers can acquire psychological satisfaction with material abundance by purchasing and using luxury goods. Also, from the view of corporations, luxury goods have price inelastic characteristics, so they can enjoy price premium and it is good to produce good performance. That is the reason why they should pay much attention to securing luxuriousness. This study examined the establishment of brands luxuriousness in Korean SMEs. First, it examined the world market of luxury goods industry and the present condition of Korean market. Then it identified the constituents of luxuriousness by examining the prior studies and related literatures, and designed a research model based on the theoretical grounds to suggest the methods of brand luxuriousness building of Korean SMEs. Luxuriousness can be defined as the attribute of product that distinguishes luxury goods from other products by consumers' perceptions, and the factor that provides situational benefits that motivate consumers' purchasing behavior. In this study, I identified the sub-dimensions of luxuriousness according to whether there are product related attributes and consumers' benefit in consideration of the problems of existing studies. Product related luxuriousness are classified into superiority(functional benefit) and scarcity(experiential benefit), while non-product related luxuriousness are classified into differentiation(symbolic benefit) and traditionality(exclusive benefit). The following are the ways to build brand luxuriousness. First, company can use product factors. High quality, excellent design, high recognized brand with strong, favorable and unique images can enhance the luxuriousness of brand. Second, company can use price factors. Consumers tend to perceive luxury goods as high-priced items, so lowering the price of product can undermine the luxuriousness of product. Third, company can use distribution factors. It is effective for making consumers to perceive the differentiation and scarcity of luxuriousness through limited distribution channel. In addition, store atmosphere suitable for luxury brands should be created. Fourth, company can use promotion factors. The more consumers are exposed to advertisements, the more positive attitudes toward luxury brands are made, and consumers recognize luxuriousness higher. Price promotion negatively affects consumers' perception of luxuriousness. Fifth, company can use corporate factors. Consumer evaluations of products are influenced not only by the product attributes but also by the corporate association and corporate image surrounding the product. Considering the existing researches, it is possible to enhance the brand luxuriousness through high corporate competence and good corporate reputation. In order to increase the competence of the enterprise, it is useful to approach multidimensionally in relation with the knowledge creation capability. In corporate reputation, the external stakeholders' reputation is important, but the internal members' reputation is also important. Korean SMEs will be able to build brand luxuriousness by establishing marketing strategies as above and/or mix(integrate) them according to the situation.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.77-85
• /
• 2003

The lifting and lowering supports method makes up for the weak points in the classical method and provides makes construction economical effect to construction. The application of pre-compression to continuous steel box girder bridges makes it possible to reduce the amount of steel, the height of girders and consequently, the cost consequentlyof the bridges' construction by through the process of concrete filling- up and the lifting-lowering of the inner supports. The lifting and lowering supports method is apt to cause local buckling in the lower flange and web plates by due to the process of the lifting of the inner supports. Therefore iln this study, therefore, the possibility of local buckling could be decreased, in consideration of the lifting force and the buckling strength of stiffened plates, by increasing the number of longitudinal stiffeners and the installation of extended longitudinal stiffeners on the lower flange and the web plates in the range of positive moment.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fibers were treated by passing on the plate heater to study the annealing effect on the change of morphological structure and physical properties. In the X-ray diffraction curves of PTT annealed, a sharp peak at 2$\theta$=15.6$^{\circ}$ appeared and the peak intensity became stronger with the increase of annealing temperature and time. This peak was based on the (010) plane of PTT crystals. The crystallinity determined by density measurement was also increased by annealing. With the increases of temperature and time, the dynamic viscoelastic behaviors were shown to be a large reduction in T(tan $\delta$$_{max}$). The birefringence and $T_g$ were also reduced, but the melting temperature was the same. These results mean that the molecular chains in armorphous region are transfered into the crystalline legion, making the remained chains relaxed during annealing at tensionless state.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.53.2-53.2
• /
• 2010

지금까지 능동 구동 디스플레이의 TFT backplane에 사용하고 있는 채널 물질로는 수소화된 비정질 실리콘(a-Si:H)과 저온 폴리실리콘(low temperature poly-Si)이 대표적이다. 수소화된 비정질 실리콘은 TFT-LCD 제조에 주로 사용되는 물질로 제조 공정이 비교적 간단하고 안정적이며, 생산 비용이 낮고, 소자 간 특성이 균일하여 대면적 디스플레이 제조에 유리하다. 그러나 a-Si:H TFT의 이동도(mobility)가 1 cm2/Vs이하로 낮아 Full HD 이상의 대화면, 고해상도, 고속 동작을 요구하는 UD(ultra definition)급 디스플레이를 개발하는데 있어 한계 상황에 다다르고 있다. 또한 광 누설 전류(photo leakage current)의 발생을 억제하기 위해서 화소의 개구율(aperture ratio)을 감소시켜야하므로 패널의 투과율이 저하되고, 게이트 전극에 지속적으로 바이어스를 인가 시 TFT의 문턱전압(threshold voltage)이 열화되는 문제점을 가지고 있다. 문제점을 극복하기 위한 대안으로 근래 투명 산화물 반도체(transparent oxide semiconductor)가 많은 관심을 얻고 있다. 투명 산화물 반도체는 3 eV 이상의 높은 밴드갭(band-gap)을 가지고 있어 광 흡수도가 낮아 투명하고, 광 누설 전류의 영향이 작아 화소 설계시 유리하다. 최근 다양한 조성의 산화물 반도체들이 TFT 채널 층으로의 적용을 목적으로 활발하게 연구되고 있으며 ZnO, SnO2, In2O3, IGO(indium-gallium oxide), a-ZTO(amorphous zinc-tin-oxide), a-IZO (amorphous indium-zinc oxide), a-IGZO(amorphous indium-galliumzinc oxide) 등이 그 예이다. 이들은 상온 또는 $200^{\circ}C$ 이하의 낮은 온도에서 PLD(pulsed laser deposition)나 스퍼터링(sputtering)과 같은 물리적 기상 증착법(physical vapor deposition)으로 손쉽게 증착이 가능하다. 특히 이중에서도 a-IGZO는 비정질임에도 불구하고 이동도가 $10\;cm2/V{\cdot}s$ 정도로 a-Si:H에 비해 월등히 높은 이동도를 나타낸다. 이와 같이 a-IGZO는 비정질이 가지는 균일한 특성과 양호한 이동도로 인하여 대화면, 고속, 고화질의 평판 디스플레이용 TFT 제작에 적합하고, 뿐만 아니라 공정 온도가 낮은 장점으로 인해 플렉시블 디스플레이(flexible display)의 backplane 소재로서도 연구되고 있다. 본 실험에서는 rf sputtering을 이용하여 증착한 a-IGZO 박막에 대하여 열처리 조건 변화에 따른 a-IGZO 박막들의 광학적, 전기적 특성변화를 살펴보았고, 이와 더불어 a-IGZO 박막을 TFT에 적용하여 소자의 특성을 분석함으로써, 열처리에 따른 Transfer Curve에서의 우리가 요구하는 Threshold Voltage(Vth)의 변화를 관찰하였다.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.3
• /
• pp.111-115
• /
• 2013

To study the encapsulation method for large-area organic light emitting devices (OLEDs), OLED of ITO / 2-TNATA / NPB / $Alq_3$:Rubrene / $Alq_3$ / LiF / Al structure was fabricated, which on $Alq_3$/LiF/Al as protective layer of OLED was deposited to protect the damage of OLED, and subsequently it was encapsulated using attaching film and flat glass. The current density and luminance of encapsulated OLED using attaching film and flat glass has similar characteristics compared with non-encapsulated OLED when thickness of Al as a protective layer was 1200 nm, otherwise power efficiency of encapsulated OLED was better than non-encapsulated OLED. Encapsulation process using attaching film and flat glass did not have any effects on the emission spectrum and the Commission International de L'Eclairage (CIE) coordinate. The lifetime of encapsulated OLED using attaching film and flat glass was 287 hours in 1200 nm Al thickness, which was increased according to thickness of Al protective layer, and was improved 54% compared with 186 hours in same Al thickness, lifetime of encapsulated OLED using epoxy and flat glass. As a result, it showed the improved efficiency and the long lifetime, because the encapsulation method using attaching film and flat glass could minimize the impact on OLED caused through UV hardening process in case of glass encapsulation using epoxy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.145-153
• /
• 1984

In the present work, a computer simulation is performed employing Hottel-Whillier-Bliss model for thermal performance of solar collectors. The major collector parameters examined in the computer simulation are: number of transparent glass covers(N), thermal emissivity of the absorbing plate surface (.epsilon.$_{P}$), absorptivity of absorber plate (.alpha.$_{p}$), flow rate per unit area of collector (G), $L_{b}$ / $k_{b}$ of insulation material, tilt angle of collector (S), and solar insolation(I). By varying numerical values of the major collector parameters around their typical values, the corresponding variations in thermal efficiency curves are examined. In addition, an experimental investigation has been carried out with a slightly modified KAIST collector test loop under a real sun condition in order to compare with the simulation results, examine the applicability of the mathematical model of the collector thermal performance, and study the effect of variation of flow rate (G) on thermal efficiency and the range of optimum flow rate.e.