• The Journal of the Acoustical Society of Korea
• /
• v.12 no.6
• /
• pp.53-61
• /
• 1993

이 논문은 접은 도체박판의 단순한 구조가 전자유도형 변환기 역할을 한다는 것을 기술하고 있다. Endoh 등은 볼록한 나선코일과 동박판으로 구성된 볼록한 방사면 모양을 한 전자유도형 변환기가 시간적으로 짧은 충격파를 발생할 수 있기 때문에 뚜렷한 초음파 영상을 얻을 목적으로 Eisenmenger에 이어 전자유도형 EMAT를 보고한 바 있다. 여기서는 코일이 없는 EMAT를 소개한다. 이것은 두께 0.05mm, 폭 5cm 길이 임의의 동박판으로 구성되며 동박판은 절연도료를 칠한 종이로 절연되고 접어서 견고하게 밀착시키며, 여러번 접는 경우는 손부채처럼 접는 방향은 교대로 반대방향으로 접는다. 그리고는 엷은 고무판을 표면에 밀착시키고 연변을 실리콘 충전제등으로 고정시키거나, polyester molding을 하여 표면을 concave형으로 하여 완성하였다. 완성된 EMAT들은 수조에서 축전기방전방식으로 실험을 하였으나 EMAT에서 발생되는 으파의 진폭은 접는 회수에 비례하였으녀, 단접형 EMAT보다 다접형 EMAT의 발생음파가 보다 강력하였다. Concave형 EMAT의 음속은 예견한 바와 같이 잘 집속되었다. 그러나 평판형의 경우는 지향성은 100도로서 넓은 지향각을 나타내었다. 2μF, 600Volt의 축전기 방전에 의한 집속형 concave EMAT를 여기시키기 위한 축전기의 용량이 작을수록 대역폭은 더욱 넓었다.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.2
• /
• pp.7-12
• /
• 2008

It is attempted, in this study, to analyze the movement of the fluidity of polar magnetic fluid and to relate Newtonian fluid with the Inlet Length of infinity plates when distance between parallel plates is L. A numerical analysis is performed for the variation of inlet length when magnetic effect parameter and polar effect parameter which give special advantages to magnetic fluid are increased. From the result of numerical analysis, we confirmed that the inlet length shortens as the flux around the center axis is accelerated and the flux around the surface of a wall is controlled as the magnetic effect parameter and the polar effect parameter are increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.249-250
• /
• 2006

Recently FPD(Flat Panel Display) is used in various field to display enormous information. So cutting technique of flat panel display is needed for producing variety display merchandises. In present, cutting methods of flat panel glass includes breaking process. But this process occurs many glass particles. This glass particles are directly related badness of merchandise and falling productivity. In this paper, to cut front substrate glass of LCD and to get optimized cutting condition are tried fur eliminating breaking process with developed glass cutting machine using a Piezoelectric ceramics actuator. It is known that the vibration of Piezoelectric Ceramic have effect in crack proceeding through the analysis of fracture section.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.227-230
• /
• 2000

본 논문에서는 외부방사 문제에 널리 사용되는 음향경계 요소 법(Acoustic Boundary Element Method)을 확장하여 저주파수 대역은 기존의 방법을 이용하고 고주파수 대역에서는 경계요소의 특성길이에 의한 고주파수 상한을 극복할 수 있는 방법을 제시한다. 밴드를 대표하는 음압 레벨을 직접 계산하도록 상호상관도 가정을 통하여 간략화 하였다. 간단한 음향방사 모델인 배플이 있는 빔과 평판에 대하여 Rayleigh 적분식의 계산결과와 제안된 방법을 비교하여 적용효능성을 검토하였다. 적용을 위한 조건으로는 방사면 진동의 상호상관도가 작아야 하므로, 이를 만족시키기 위한 일반적인 조건식을 제시하여 이로부터 경계요소의 특성길이를 정하는 기준을 제시하였다.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.268-273
• /
• 2014

To investigate the turbulence characteristics within the boundary layer over a flat plate, an experimental study was performed using a PIV technique in a circular water channel. For two water velocities, 0.92 and 1.99 m/s, the water velocity profiles were taken and analyzed to determine turbulent characteristics such as the Reynolds stress, Taylor micro-length scale, and Kolmogorov length scale within the defect law region of the boundary layer. These analysis methods may be applied to research on the friction drag reduction technology using micro-bubbles or an air sheet over the surface of a ship's hull, because the physical reason for the friction drag reduction could be found by understanding the variation of the turbulence characteristics and structures in the boundary layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.781-787
• /
• 2004

In this paper, a novel dual and wide band aperture stacked patch antenna for Cellular/PCS/IMT-2000 base station is presented. It consists of single microstrip patch having notches along the radiating patch, two dielectric substrates and a form material. To achieve wide band characteristic, we utilize the coupling effect between the notched patch and the resonant aperture in the ground plane and by properly cutting notches on the patch, an aperture stacked patch antenna could be designed to yield dual frequency operation. By the proper choice of resonant aperture size and height of a foam material, dual and wide band characteristic could be realized the measured impedance bandwidth(1:1.5 VSWR) of designed antenna at lower band(860 MHz) reaches 77 MHz and covers the Cellular CDMA band(824∼894 MHz). The measured impedance bandwidth(1:1.5 VSMR) of the designed antenna at upper band(1,960 MHz) is about 550 MHz and covers both the PCS band(1,750∼l,870 MHz) and the for-2000 band(1,920∼2,170 MHz). Good broadside radiation with high gain(5.65∼7.4 dBi) characteristics have also been observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.515-522
• /
• 2010

The objective of this study is to investigate the air-side heat transfer characteristics of a spirally-coiled circular fin-tube heat exchanger for various geometric parameters under non-frosting conditions. The heat transfer characteristics of the heat exchanger were analyzed with respect to heat exchanger geometries, and then, the characteristics were compared with those of rectangular-plate fin-tube heat exchangers with discrete fins. The heat transfer coefficient increased with a decrease in the number of tube rows and an increase in the fin pitch. The optimum length of the L-foot was 2.7 mm. In addition, the heat transfer rate increased with a decrease in the tube pitch and the tube thickness. The heat transfer coefficient of the spirally-coiled circular fin-tube heat exchanger was 24.3% higher than that of the rectangular-plate fin-tube heat exchanger.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2325-2331
• /
• 2012

Planar square-spiral antenna using a strip conductor is proposed and analyzed for RFID system in UHF band operating from 860MHz to 960MHz. By varying the length of common line, detached distance, strip line-space, strip line-width and the number of spiral turn, the optimized antenna are designed and fabricated in compact size without a matching-stub between the input port of the proposed antenna and RFID tag chip. From the optimized results, the frequency bandwidth in VSWR<2 has covered 100MHz in the RFID UHF band. The antenna gain has obtained 3.5dBi at the center frequency of 910MHz and the desired beam pattern has shown directional pattern on elevation and azimuth angle. Therefore, the proposed antenna is suitable for practical RFID applications requiring various tag chips with the specific input impedance.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.447-451
• /
• 2007

A triplexer based on a silica planar lightwave circuit Mach-Zehnder nterferometer(MZI) is proposed and its characteristics are analyzed through simulations. To separate 1310 nm band and $1480{\sim}1560nm$ band properly, the path length difference of an MZI is set to be the multiple and half of the wavelength 1310 nm and the balance of the directional coupler is optimized in the $1480{\sim}1560nm$ band. The same MZI is additionally cascaded to provide good crosstalk characteristics. The 1490 nm band and 1550 nm band are further separated using additional two stage MZI's. A three-dimensional BPM and transfer matrix method analysis predicts the low crosstalk characteristics and the fabrication-error-tolerance of the proposed triplexer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.801-808
• /
• 2004

In this paper, we proposed the grating parallel plate waveguide structure for converting a linearly polarized wave to a circularly polarized wave. For the design of the polarizer, the moment method and Floquet's theorem are applied under two assumptions that the incident wave is a plane wave and the structure is infinitely periodic. In order for the more precise design, we performed the near-field analysis for the finite polarizer structure using MATLAB. By comparing with the measured results obtained by the near-field arrangement, we verified the correctness of our near-field analysis. By taking the ideal assumptions considered in the initial design procedure into account, newly designed modified dimensions for the polarizer was suggested which give improved performance.