• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.34-43
• /
• 1999

Flow-induced voids during resin impregnation and poor fiber wetting have known to be highly detrimental to the performance of composite parts manufactured by resin transfer molding(RTM) process. In this study, in order to overcome these serious problems encountered in RTM, the effects of surface modification by using silane coupling agent as a surface modifier on the flow characteristics, the wetting between resin and fiber, and void content were investigated. For the experiments of microscopic flow visualization and curing in a beam mold, glass fiber mats having plain weaving structure and epoxy resin were used. Modifying the fiber surface was found to result in a significant decrease of dynamic contact angle between resin and fiber and increase of wicking rate. Therefore, it was confirmed that the surface modification employed in this study could improve the wettability of reinforcing fibers as well as micro flow behavior. In addition, It was revealed that high temperature and low penetration rate of the resin are more favorable processing conditions to reduce the dynamic contact angle. However, surface modified fiber mat was found to have lower permeability than the unmodified one, which may be explained in terms of the decrease of contact time between resin and fiber owing to improvement of wetting. It was also exhibited that surface modification had a significant influence on void formation in RTM process, resulting in a decrease of overall void content due to the improvement of wetting in cured composite parts.

• Conservation Science in Museum
• /
• v.15
• /
• pp.96-121
• /
• 2014

Portrait of Sim Huisu is a seventeenth-century Joseon portrait of a meritorious vassal. The National Museum of Korea currently owns two portraits of Sim Huisu, which are the eldest son's family and by the eldest grandson of the family's second eldest son. Both were donated in 1980. Portraits were still in its original mounting, but the supporting silk had been damaged and stained in a flood. Conservation treatment was undertaken to restore the original style, and scientific analysis, such as, X-ray, XRD, XRF and Graff "C" stain, was conducted to study the materials and painting techniques. The support silk was found to be refined fibroin and a plain weave consisting of two weft threads and one warp thread. The lining papers were found to be bamboo fiber paper of first layer in China and Korean traditional mulberry paper in second. Various pigments were identified in the painting, including white lead, cinnabar, atacamite, ink stick, azurite, silver, and gold. The study also confirmed the use of the back painting, with colors such as white ^{White Lead}, green ^Atacamite, orange ^Minium, black ^{Ink Stick}, and yellow ^Dye. Also, it was found that stick ink or dye was used with white lead.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.185-194
• /
• 1998

Flow-induced voids during resin impregnation and poor fiber wetting give serious effects on the mechanical properties of composites in resin transfer molding process. In order to better understand the characteristics of resin flow and to investigate the mechanism of void formation, flow visualization experiment for the resin impregnation was carried out on plain weaving glass fiber mats using silicon oils with various viscosity values. The permeability and the capillary pressure for the fiber mats of different porosities were obtained by measuring the penetration length of the resin with time and with various injection pressure. At low porosity and low operating pressure, the capillary pressure played a significant role in impregnation process. Video-assisted microscopy was used in taking the magnified photograph of the flow front of the resin to investigate the effect of the capillary pressure on the void formation. The results showed that the voids were formed easily when the capillary pressure was relatively high. No voids were detected above the critical capillary number of 2.75$\times$$10^{-3}, and below the critical number the void content increased exponentially with decrease of the capillary number. The content of void formed was independent of the viscosity of the resin. For a given capillary number, the void content reduced with the lower porosity of the fiber mat.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.612-620
• /
• 2019

A woolen tapestry curtain, owned by the Seoul Museum of Craft Art, is composed of tabby by cotton-warp and wool-weft threads and its patterned part is shown as a tapestry; paint with pigment has been added to it. The chromaticity of this curtain was measured and the substances in the deep red color were confirmed as Hg by an analysis of the ingredients through X-ray fluorescence. This is presumed to be cinnabar or vermilion. Analyses were performed on a total of seven fabric samples, including the warp & weft of the fabric, its trimming, and its back fabric. As a result, the warp of the woolen tapestry curtain was determined to be a cotton fiber with a middle hole or lumen in the cross-section. Furthermore, an infrared peak likewise showed O-H and C-O binding. Wool fibers as wefts were identified with circular and oval cross-sections and IR peaks showed N-H/O-H stretching and amide(-CONH-). The animal hair samples used in the wool fiber are believed to have come from long-tailed goral or goats and the possibility of using easy-to-spin sapsal dog hair is also not to be overlooked. This was determined through a contrast analysis by the Cultural Heritage Administration to identify the animal species used in the tapestry.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.51-57
• /
• 2013

In order to know the shear performances of a bolted connection in reinforced glulam depending upon the combination of textile glass fiber, a tensile-type shear test was conducted. Textile glass fiber was used as a reinforcement, whose glass fiber arrangement was a plain weaving type or a diagonal cloth type. Reinforced glulam was made up of 5 plies and it was produced by inserting and laminating the plies between laminas depending upon a changed insert position and combination form of textile glass fiber. Tensile-type shear test specimens were a steel plate insert-type and joined at end-distance 7D with bolts whose diameter 12 or 16 mm. In textile glass fiber reinforced glulam, whose volume ratio was 1%, the yield shear strength of a 12 mm bolted connection increased by 10% when a test specimen had reinforced internal layers than when external layers were reinforced. As for textile glass fiber reinforced glulam, whose volume ratio was 2%, the yield shear strength of a 12 mm bolted connection increased significantly by about 22% compared to the bolted connection of non-reinforced glulam, and the yield shear strength of a 16 mm bolted connection was improved by about 20% compared to the bolted connection of non-reinforced glulam.

• Composites Research
• /
• v.29 no.3
• /
• pp.117-124
• /
• 2016

The failure strength of composite single-lap joint repaired using scarf patch was investigated by test and finite element method. A total of 45 specimens were tested changing scarf ratio, stacking pattern, and defect size to study the failure strength and mode. Except for one case, all repaired specimens showed the equal or higher strength than the sound specimens and the effect of considered repair parameters was not remarkable. It was found through the failure mode inspection that the surface treatment for bonding was not enough in the case which failed at the lower load than the sound specimen. Three-dimensional finite element analysis was conducted to verify the test results. It was confirmed that the considered repair parameters do not significantly affect the stress distribution of the specimens. It was also observed that the applied tensile load is relieved passing through the overlapped region thickness of which is almost double. From this study, it is concluded that if the bonding procedure for adherends and patch including surface treatment for fabric layer is thoroughly followed, the strength of repaired single-lap joint can be restored up to the strength of sound one.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.97-104
• /
• 2000

PAN-based activated carbon fibers/phenolic resin matrix composites (ACFCs) were manufactured via molding process with oxidized carbon fabrics (plain-type) and phenolic resin (resole-type) compounded by 70 : 30 wt%. The green body (as molded) was submitted to carbonization (at 100$0^{\circ}C$) in an inert environment and activation (at 700, 800, 900 and 100$0^{\circ}C$) in a $CO_2$ environment. In this work, the influence of activation temperatures was investigated in surface properties, such as pH, acid- and base-values by titration method, and in adsorption properties, i.e., specific surface area and pore structures by BET-method of the composites. Also, the pressure drops of the specimens were calibrated by ASTM. As a result, the activation temperature influenced the surface property of ACFCs. When the activation temperature was higher than 90$0^{\circ}C$, the surface was gradually developed in basic nature. And, the evolutions of specific surface area, total pore volume and pore size distribution of ACFCs could be easily confirmed the dependence on the activation temperature. Among them, well-developed pore structure from adsorption characteristics was changed of the ACFCs activated at 90$0^{\circ}C$. Also, the pressure drop was slightly decreased with increasing the temperature due to increasing the burn-off with heat treatment temperature of ACFCs.

• Korean Security Journal
• /
• no.18
• /
• pp.39-54
• /
• 2009

The purpose of this research, the importance of security and the means to carry out the spirit of Taekwondo is to identify. First, the target of more than 2 years of taekwondo training has continued to set as a guard, and experience to respond faithfully to the general staff to the administrator from 9 respondents were selected to accomplish this purpose. Through the course of a series of studies which have drawn the following conclusions. First, taekwondo training is created through the politeness, lot of nerve, patience, self-mastery, indefatigable the spirit of taekwondo in the security mission is a positive impact. Typically, the bodyguards make a statement through the body and mind will acquire the spirit of taekwondo. The spirit of taekwondo becomes an important material on the process of security mission as the stress and the occurrence of the situation, such as conflicts within the organization to overcome the negative situation. Second, it requires the right attitude in life, mental health, flexible social attitudes based on the taekwondo spirit. Therefore, the security guards needed in the organization the opportunity to learn the position could get the hierarchy between protection and bodyguard, or supervisor bodyguards and low class bodyguard.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.99-114
• /
• 2018

Saekdong is a unique Korean fabric that has been used since ancient times, and it is woven with the plain or satin weave so that vertical stripes appear by various colored warp threads of equal spacing. Saekdong means pleasure, joy, serenity, heavenly blessing, spirituality, wind, and abundance, expressing the optimistic and positive sentiment of Korea's forefathers. This study investigated how ancient Saekdong occurred with meanings. As a research method, this study used literature review and surfing newspapers and photographs, museum and internet search, even from other fields such as earthenware, bronze, and traditional dance. We collected Saekdong and the lifestyles of ethnic Koreans living in China, investigated the Asuka culture of Japan, and the tomb murals of Takamatsu-Chong, which are Baekje and Goguryeo settlement areas. The results are as follows: First, it expresses happy occasion, pleasure, and joy, and expresses a desire for good things to be repeated and lasting. Second, it symbolizes simple beauty, order, equality and harmony of many tribes. Third, Saekdong is life and power which represent a sacred, heavenly, mysterious bird. Fourth, it symbolizes abundance and wealth, rain, wind or fields. Finally, this study showed the brilliance and pride of Korean hanbok through Saekdong. The significance of this study is to examine the symbolism and inherent aesthetic characteristics of Saekdong and to show the unique value and spiritual heritage of the Korean people.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.1-11
• /
• 1963

This treatise is to set up a fundamental condition of checking silk lousiness and to set up a new improving method of cocoon bave lousiness after super refining treatment. It is also studied whether silk lousiness can be eliminated through the observation of the silk gland, or the lousiness can be able to improve through such a study. The conclusions obtained in this paper are as follows. 1. Silk lousiness is able to be observed most properly when the light direction and the fiber direction are parallel in plan view of the silk cloth and the greater the angle between them is, the less the lousiness is observed. When, however, the angle is greater than some specific angle(30$^{\circ}$), no more lousiness is observed. This specific angle is named by the author as Lousiness Horizontal Critical Angle. 2. Silk lousiness can be observed when the angle of light incidence against the silk cloth is six degrees, while the larger the angle is, the less the lousiness is observed. When, however, the angle is greater than same specific angle(45$^{\circ}$) the lousiness disappears. Such a specific angle is named by the author as Lousiness Vertical Critical Angle. 3. The best textile composition to decrease lousiness defect is plan weave, while twill and satin weave show more lousiness with the same silk fiber. 4. Lousiness was classified as Lousiness A, B, ana C of which A was the general lousiness, B was the group type, and C was the glucose type and the standard photographs for the lousiness grading of these types were prepared. 5. The proper soap-refining hours of silk for lousiness test was eight hours. 6. The greater the difference of fiber diameter between the cocoon single bave and the splitend was, the more lousiness was composed. The normal splitends were measured as 1/4-1/5 of the main fiber. 7. The lousiness was found at the cocoon shape ends more than other parts, and found at the middle cocoon layer than other layer which was imagined to be as a result of poor uniform bave spinning of silk worm. 8. Female cocoon had more lousiness than the male cocoon. 9. It was found that there was a great possibility to have the splitends through the observation of the anatomical silkgland, and the author reached a conclusion that the lousiness can be improved to a certain degree only by the elimination of abnormal silk gland from the breeding aspects. 10. The cocoon bave of the offspring after super refining lousiness test and selection showed more improved lousiness defect than that of the parents.