• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.141-146
• /
• 1999

본 연구는 평면곡선부의 차량속도변화와 교통사고에 대한 영향을 분석하기 위해 수행되었으며, 이를 위해 곡선반경별로 진입부 직선도로 - 곡선부 - 이탈부 직선도로로 구분하여 각 주행속도를 산정하였다. 본 연구에서는 선행차량에 의해 영향을 받지 않는 속도를 이용하여 평면곡선부 기하구조의 영향을 분석하였다. 이러한 곡선부의 주행 속도를 분석한 결과, 곡선반경별 최저속도와 그 속도가 나타나는 위치를 분석하였고, 해당 도로구간의 교통사고자료를 분석하여 평면곡선부의 차량주행속도변화와 교통사고 발생간의 관계를 규명하였다. 연구 결과는 다음과 같다. 첫째, 운전자들은 곡선시작지점에 도착하기 전에 충분히 속도를 줄이고, 곡선부에서 가장 낮은 속도가 나타나는 위치는 곡선시점의 후방에서 나타나고 이는 운전자의 시거에 의한 영향이다. 둘째, 곡선부에서의 속도변화폭이 클수록 사고위험성은 크고 실제 교통사고의 발생건수는 높다. 본 연구의 결과에 의해 도로 주행의 안전성을 고려한 평가지표를 개발할 수 있으며, 이에 의한 일관성 있는 도로설계를 유도할 수 있다.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.589-594
• /
• 2010

Superimposition of horizontal and vertical curves may hamper the ride comfort and running stability of train and largely affect the maintenance costs. However, in many cases, it is not easy to make a track alignment plan because of the geographic conditions or undesirable environmental factors. In this paper, a comparative study on the effect of superimposition of vertical and horizontal curve on the ride comfort and optimum horizontal curve conditions was performed. That is, optimal cant and ride comfort analysis with and without a vertical curve superimposed on the horizontal curve were evaluated. Also the superimposition effect on ride comfort and alignment conditions in high speed zone were evaluated. From the analysis results, it was found that the ride comfort is similar to that at the only horizontal curves when applying the compensation cant for the superimposed site.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2008

Achieving consistent geometric design is an important goal in highway design to ensure obtaining safe, economical and smooth traffic operation. Most evaluation of consistency is based on 'speed change' in speed profile. According to literature, the speed depends on geometric elements, speed on tangent section prior to a curve, and background around roads. Especially, the radius is the most main element mentioned in various literature. Therefore, this paper shows two ways of calculating horizontal radius on real road, that is, three-dimensional road. First of all, the radius of horizontal curve is calculated based on physical method. The calculated radius contains not only superelevation but also longitudinal grade while the current minimum radius is calculated by considering superelevation and side friction according to the point-mass equation. Secondly, the problem of composed curves with distorted appearance by overlaying sag or crest vertical alignment has been known. To quantify the extent of distortion effects, the method of calculation of real seen so called 'Perspective Radius' is developed. The paper presents the perspective radius and recommended perspective radius.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.3
• /
• pp.28-33
• /
• 2004

본 논문에서는 자유곡면 간의 교차곡선이 갖는 위상 구조를 분석하는 방법을 제시하며, 또한 이를 이용하여 교차곡선을 효율적이고 안정적으로 계산하는 알고리즘을 제안한다. 자유곡면 간의 교차곡선 계산은 현재까지 난문제로 알려져 있으며, 그러한 가장 큰 원인 중의 하나로서 교차곡선의 위상 구조를 분석하기 어렵다는 점을 들 수 있다. 본 논문에서는 입력으로 주어지는 자유곡면 중의 하나가 매개변수 곡면 F(u, v) 이라는 가정 하에 음함수 곡면 g(x, y, z) = 0 과의 교차곡선, 그리고 또 다른 매개변수 곡면 G(s, t)와의 교차곡선 계산방법을 제시한다. 교차곡선은 uv-평면 상의 평면 곡선으로 고려되며, 이 평면곡선에서 u-방향에 대한 극점(critical point)을 먼저 계산한 뒤 이를 이용하여 위상구조를 분석한다. 또한, 분석된 위상구조를 기반으로 전체 교차곡선을 추적(tracing)하는 알고리즘을 제시한다.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2000

The Purpose of this Paper was to study the relationship between the change of operating speeds and the accidents on horizontal curves. For this purpose, we divided a horizontal curve section into two parts, a tangent section and a curve section, to estimate the operating speed for each vehicle. For studying relationship between the change of speed and geometric effect, the free-flow speed was used. The location and speed for the lowest speed were studied. Also, we analyzed the relationship between the change of operating speeds and the accidents. The followings are resulted in this study. First, drivers tend to reduce speeds significantly before they reach a curve. And the lowest speed was recorded at the downstream of the Point of curve (PC) due to the limited sight-distance of drivers on curve. Second, the larger the change of operating speeds become, the greater frequency of accident was recorded. These results can be used for developing the safety index on highways to check the design consistency.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.311-317
• /
• 2013

In railway construction, superimposition of horizontal and vertical curves has critical effects on the running stability and the ride comfort of vehicles as well as on construction costs. In this study, running safety, ride comfort, and track acting forces were analyzed by a numerical analysis using the VAMPIRE program according to cases of superimposition of vertical and horizontal curves. From the analysis results, it was found that running safety, riding comfort, and track acting forces in the case of superimposition of vertical and horizontal curves as well as vertical and transition curves meet all of the criteria. Also, in the case of the superimposition of vertical curves and curvature change between horizontal transition curves and circular curves meet all of the criteria.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.309-316
• /
• 2010

When the horizontal and vertical curves are superimposed in railway alignments, which affects the running stability, ride comfort, and track maintenance costs. However, when designing new lines or realigning existing ones, there are many cases of superimposition caused by the existing fixed points (bridge, tunnel, turnout, and catenary system, etc) on the conventional lines and undesirable impacts on the environment, etc. In this study, when the horizontal and vertical curves are superimposed, in order to optimize the horizontal curve in aspect of the ride comfort, the object function was developed and verified by vehicle dynamic analysis. Also, the solution algorithm for simplified evaluation method was presented.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.279-284
• /
• 2010

The plane curve approach which was proposed by Boukharouba et. al. is a multi-threshold selection method through searching peak-valley based on histogram cumulative distribution function. However the method is required to select parameters to compose plane curve, and the shape of plane curve is affected according to parameters. Therefore detection of peak-valley is effected by parameters. In this paper, we propose an entropy maximizing-based method to select optimal plane curve parameters, and propose a multi-thresholding method based on the selected parameters. The effectiveness of the proposed method is demonstrated by multi-thresholding experiments on various images and comparison with other conventional thresholding methods based on histogram.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.195-212
• /
• 1998

본 연구는 새로운 설계일관성 검토기법의 정립을 위하여 수행되었으며, 이를 위해 속도추정 모형을 개발하였다. 본 연구를 통해 개발된 모형은 차량의 주행속도에 가장 큰 영향을 미치는 주 요소를 고려한 장점을 지니고 있다. 즉 평면곡선에서는 운전자의 시각적 판단을 기초로 등판차량의 주행속도를 추정하였다. 또한 이러한 속도추정이 승용차뿐만 아니라 트럭의 경우로 나누어 이루어짐으로써, 차종별 고려가 가능하도록 하였다. 다음은 본 연구를 통해 이루어진 결과이다. 평면곡선에서는 승용차와 트럭의 속도가 같게 추정되었으며, 시거를 통해 산정된 추정속도는 곡선반경과 밀접한 관계를 갖는다. 종단선형에서 승용차의 속도는 구배의 영향을 받지 않으나, 트럭은 구배의 영향으로 속도가 감소한다. 이 때 트럭에 작용되는 가속도는 모두 세 종류로써, 첫째, crawl speed에 도달할 때까지 작용한 가속도$(a_1)$와 둘째, crawl speed 이후 작용한 가속도$(a_2)$ 그리고 셋째, 하향구배 주행시 작용된 가속도$(a_3)$로 구분된다. Watanatade가 제시한 것과 같이 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교 함으로써, 작은 속도의 궤적을 따라 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교함으로써, 작은 속도의 궤적을 따라 합성선형의 속도를 추정하는 것은 합성선형이 차량의 주행속도에 미치는 영향을 간과한 것으로 판단할 수 있다. 그러나 본 모형에서는 합성선형의 영향을 고려하여 승용차와 트럭의 주행속도를 추정함으로써, 보다 현실적으로 주행속도를 추정하였다. 본 연구의 결과는 도로의 설계일관성을 검토하는데 매우 유용한 도구가 될 것이며 향후 운전자의 희망속도 결정, 감속율의 산정, 교통류의 고려, 도로설계의 전산화 자료와 연결 등을 통해 보다 실용적인 결과를 산출할 수 있을 것이다.