• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.13-15
• /
• 2008

LiDAR(Light Detection and Ranging)는 3차원공간정보를 신속하게 구축할 수 있는 최신 측량 기술로써 최근 그 활용도와 중요성이 높아지고 있다. 그러나 LiDAR 관측성과는 시스템 특성상 높은 수직 정확도를 제공하고 있으나 항공사진과 같이 정확한 평면위치를 측정하여 조정할 수 없으므로 상대적으로 낮은 수평 정확도를 가지고 있다. 본 연구에서는 LiDAR 관측에 의한 건물의 벽면 반사파를 이용하여 건물모서리의 평면 좌표(x, y)를 추출하고, 이를 항공삼각측량에 의한 평면좌표와 비교분석하였다. 그 결과 LiDAR의 평면좌표가 항공삼각측량에 의한 평면좌표에 비해 상대적으로 이동되어 있음을 확인할 수 있었다. 따라서, 2차원 좌표변환을 수행하여 LiDAR의 평면좌표를 보정하여 정확도를 향상시킬 수 있었고, 이를 이용하여 향후 LiDAR 관측성과 품질 향상에 도움이 될 것이라 기대한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.3 no.2
• /
• pp.18-31
• /
• 1985

The object of this study is to analize the trilateration adjustment by FEM. FEM is a numerical method for analysis dealing with problems of displacement and variation about the object. Since a plane trilateration net can be likend to a plan structural frame work in stress analysis, the technic of FEM can be used for trilateration adjustment Thus, this study applied FEM and Condition Equation Method to a trilateration adjustment, and investigated precision and characteristics of them.

• Journal of the Korean housing association
• /
• v.24 no.4
• /
• pp.61-73
• /
• 2013

The purpose of this study is to provide information needed to the construction of the co-housing in the urban area. This study focused on the characteristics of co-housing in its planning process of private house & common space; 'economy', 'creativity' & 'sociality'. The object of this study is co-housing in 'Seongmi-san Village' in Seoul, which was built by a coordination company with residents' participation. The methods are investigating interview materials, floor plans of 9 households, & common space plans produced in the coordination process from the basic plan of private house & common space to the final plan. The results are as follows. 1) The size and plan of private house differed from each other. The water pipe location differed from each floor, so that there were difficulties in construction. In conclusion, these made no 'economy', but brought high 'creativity'. 2) The 'sociality' would be estimated as high because there were various types of resident participation; resident interviews on the planning, workshops for private housing plan, and workshops for common space.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.627-637
• /
• 2011

To cope with the high power density and low cost in switching power supply, this paper presents a novel planar transformer, which can regulate the leakage inductance of planar transformer used for LLC resonant converter. Modeling and analysis of a novel planar transformer are discussed in detail and a prototype 200W LLC resonant converter is tested to verify.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.291-292
• /
• 2007

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.319-324
• /
• 2016

In the case of robot and Argument Reality applications using a camera in environments, a technology to estimate planes is a very important technology. A RGB-D camera can get a three-dimensional measurement data even in a flat which has no information of the texture of the plane;, however, there is an enormous amount of computation in order to process the point-cloud data of the image. Furthermore, it could not know the number of planes that are currently observed as an advance, also, there is an additional operation required to estimate a three dimensional plane. In this paper, we proposed the real-time method that decides the number of planes automatically and estimates the three dimensional plane by using the continuous data of an RGB-D camera. As experimental results, the proposed method showed an improvement of approximately 22 times faster speed compared to processing the entire data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.41-49
• /
• 2007

In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.47-51
• /
• 1993

볼랜딩 하는 것은 모든제품의 다양한 형상을 얻어내는데 필수적이라 할 수 있다. 여기에서는 볼랜딩하는 방법에 있어서 형상의 변화가 쉽고 간결하게 할 수 있는 새로운 방법으로서 교차곡선을 구한 후 교차곡선을 따라가며 꼬이지 않는 평면을 설정하여 작업자에 의하여 주어지는 반경과 조정점의 위치를 조정하는 방법으로 볼랜딩하는 방법을 제시한다. 본 논문에서는 자유곡면과 자유곡면의 볼렌딩,자유곡면과 다면체곡면의 볼랜딩하는 방법을 제시한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.37-44
• /
• 1995

Cartesian coordinate systems used in national base map have 3 zones. If these coordinate systems are used at navigable digital maps without modifications, the edge-matching errors will occur near the edge of two zones. Therefore, it's required to eliminate separate zones of national plane coordinates system suitable far navigable digital map, we choose TM projection that is used at national base map but changed the location and the scale distortion of antral meridian.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.297-304
• /
• 2004

In this paper, a mesh simplification algorithm based on wavelet transform and 2D planar sampling is proposed for efficient handling of 3D objects in computer applications. Since 3D vertices are directly transformed with wavelets in conventional mesh compression and simplification algorithms, it is difficult to solve tiling optimization problems which reconnect vertices into faces in the synthesis stage highly demanding vertex connectivities. However, a 3D mesh is sampled onto 2D planes and 2D polygons on the planes are independently simplified in the proposed algorithm. Accordingly, the transform of 2D polygons is very tractable and their connection information Is replaced with a sequence of vertices. The vertex sequence of the 2D polygons on each plane is analyzed with wavelets and the transformed data are simplified by removing small wavelet coefficients which are not dominant in the subjective quality of its shape. Therefore, the proposed algorithm is able to change the mesh level-of-detail simply by controlling the distance of 2D sampling planes and the selective removal of wavelet coefficients. Experimental results show that the proposed algorithm is a simple and efficient simplification technique with less external distortion.