• Title/Summary/Keyword: 평로

Search Result 2,554, Processing Time 0.036 seconds

A Study on Combustion Gas Toxicity of Architecture Surface Material (건축용 외장재의 연소가스 독성평가)

  • Park, Young-Ju;Lee, Hae-Pyeong;Kim, Hae-Rim;Lee, Won-Seok;Yang, Young-Suk;Lee, Mi-Li
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.04a
    • /
    • pp.441-446
    • /
    • 2011
  • 본 연구에서는 건축물에 화재가 발생 시, 건축용 외장재로부터 발생하는 연소가스의 독성을 분석함으로써 소방관을 비롯한 건물 재실자들에게 미치는 영향에 대해서 고찰하였다. 실험 방법은 건물의 외장재로 많이 사용되는 일반스티로폼, 강화스티로폼, 우레탄폼 그리고 유리섬유 재질의 외장재를 대상으로 NES 713 방법을 이용하였다. 실험 결과를 살펴보면, 대부분의 시료들로부터 CO, $CO_2$, HCHO, $CH_2CHCN$, $NO_x$ 등이 검출되었으며, 우레판폼의 경우, 다른 시료들과 달리 HCl과 HCN이 추가적으로 검출되었다. 하지만 대부분의 시료들로부터 검출된 독성가스들은 치사농도에는 훨씬 못미치는 것으로 나타났으며, 독성지수 값들을 살펴보면, 일반스티로폼<강화스티로폼<유리섬유<우레판폼의 순으로 나타났다.

  • PDF

Analysis of Forest Fire Conditions on Forest Structure Changing Annually (산불연료 조건에 따른 산불특성 분석)

  • Kwon, Chun-Geun;Lee, Si-Young;Lee, Hae-Pyeong
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.04a
    • /
    • pp.421-425
    • /
    • 2011
  • 산불연료 조건에 따른 산불특성 분석을 위하여 산불피해의 조사지역은 2009년, 2010년 산불이 발생했던 강원도 고성지역과 양양지역, 강릉지역과 삼척지역을 조사 대상지역으로 선정하였으며, 고성군의 경우 활엽수림이 4개소, 칩엽수림 1개소, 양양군은 침엽수림이 3개소, 삼척시의 경우는 침엽수림이 2개소, 강릉시의 경우 침엽수림이 3개소 총 13개소를 각각 대상지로 선정하였다. 산불사례 현장조사를 통해 임목고사여부, 편면연소, 수간피해율, 수관피해율 등의 산불피해 특성을 분석한 결과 연료의 임상구조에 따른 편면연소율은 침엽수림은 67.4%, 활엽수림 47.9%로 침엽수림의 편면연소율이 활엽수림보다 19.5% 더 피해를 받는 것으로 나타났으며, 수관피해율은 침엽수림은 51.1%, 활엽수림 44.2%로 침엽수림의 수관피해율이 활엽수림보다 6.9% 더 피해를 받는 것으로 나타났다. 또한 임목고사율은 침엽수림은 44.0%, 활엽수림은 42.3%로 침엽수림의 임목고사율이 활엽수림보다 1.7% 더 피해를 받는 것으로 분석 되었다.

  • PDF

A Study on Thermal Characteristics and Ignitability of Dead Leaves and Living Leaves for Main Species of Trees in Youngdong Areas (영동지역의 주요 수종별 낙엽과 생업의 열적특성 및 발화특성에 관한 연구)

  • Lee, Hae-Pyeong;Lee, Si-Young;Park, Young-Ju
    • Fire Science and Engineering
    • /
    • v.23 no.1
    • /
    • pp.21-32
    • /
    • 2009
  • In order to inspect the danger of forest fires, the thermal characteristics and the ignitability of the dead leaves and the living leaves for the main species of trees in Youngdong areas have been studied by the TG/DTA and the group flammability tester. From this work, the thermal delay has been increased with the increase of the heating rate. The fractions of the thermal weight loss for the dead leaves and the living leaves of the coniferous trees were higher than those of the broadleaf trees. Also, it was confirmed that the ignitable dangers of the dead leaves and the coniferous trees were higher than those of the living leaves and the broadleaf trees, due to the low auto ignition temperature and thermal resistance.

Prediction of fuel moisture change on pinus densiflora surface fuels after rainfall in East sea region. (영동지역 봄철 산불기간 중 소나무림 지표연료의 임내 연료습도변화 예측)

  • Lee, Si-Young;Lee, Myung-Woog;Kwon, Chun-Geun;Yeom, Chan-Ho;Lee, Hae-Pyeong
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2008.04a
    • /
    • pp.333-336
    • /
    • 2008
  • This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for each diameter of surface dead fuels in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on the ranges which are less than 0.6cm, 0.6-3.0cm, 3.0-6.0cm, and more than 6.0cm in the forest for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days for surface deads fuels which diameter are less than 3.0cm and the convergence was made more than six days for ones which diameters are more than 3.0cm except the surface dead fuel of 3.0-6.0cm diameter of loose forest density.

  • PDF

Scientific Analysis of Daekumeumja and Pyungwesan by the Metabolism of Hesperidin (Hesperidin 대사에 의한 대금음자(對金飮子)와 평위산(平胃散)의 처방해석)

  • Kim, Nam-Jae;Bae, Eun-Ah;Han, Myung-Joo;Kim, Dong-Hyun
    • Korean Journal of Pharmacognosy
    • /
    • v.29 no.2
    • /
    • pp.136-141
    • /
    • 1998
  • To analyze scientifically the polyprescription principle of Daekumeumja(對金飮子), which has been used for alcoholic damage, and Pyungwesan(平胃散), which has been used for indigestion, the transforming rate of hesperidin of these polyprescriptions to hesperetin was investigated. The transforming rate of the former was higher 3 times than that of the latter. The transforming rate of hesperidin of Aurantii nobilis Pericarpium was inhibited by Magnoliae Cortex, but was activated by Glycyrrhizae Radix. The activity of trypsin was inhibited by Glycyrrhizae Radix and Daekumeuja. However, Aurantii nobilis Pericarpium, Atractylodis Rhizoma, Magnoliae Cortex and Pyungwesan did not inhibited it. When human intestinal microflora were cultured with the media containing Daekumeumja, Pyungwesan and herbal medicines consisting of them, Aurantii nobilis Pericarpium and Magnoliae Cortex inhibited the activity of ${\beta}$-glucosidase. These results suggests that the therapeutic effect of Daekumeumja may be better than that of Pyungwesan on alcoholic damage and the therapeutic effect of Pyungwesan may be better than that of Daekumeumja on indigestion, although these prescriptions are consisted of the same herbal medicines.

  • PDF

Study on the Precise Controlling of Fracture Plane in Smooth Blasting Method (SB발파에서 파단면 제어의 고도화에 관한 연구)

  • Cho, Sang-Ho;Jeong, Yun-Young;Kim, Kwang-Yum;Kaneko, Katsuhiko
    • Tunnel and Underground Space
    • /
    • v.19 no.4
    • /
    • pp.366-372
    • /
    • 2009
  • Recently, in order to achieve smooth fracture plane and minimize the excavation damage zone in rock blasting, controlled blasting methods which utilize new technologies such as electronic delay detonator (EDD) and a notched charge hole have been suggested. In this study, smooth blastings utilizing three wing type notched charge holes are simulated to investigate the influence of explosive initial density on the resultant fracture plane and damage zone using dynamic fracture process analysis (DFPA) code. Finally, based on the dynamic fracture process analyses, novel smooth blasting method, ED-Notch SB (Electronic Detonator Notched Charge Hole Smooth Blasting) is suggested.

Calibration of a Rotating Stereo Line Camera System for Indoor Precise Mapping (실내 정밀 매핑을 위한 회전식 스테레오 라인 카메라 시스템의 캘리브레이션)

  • Oh, Sojung;Shin, Jinsoo;Kang, Jeongin;Lee, Impyeong
    • Korean Journal of Remote Sensing
    • /
    • v.31 no.2
    • /
    • pp.171-182
    • /
    • 2015
  • We propose a camera system to acquire indoor stereo omni-directional images and its calibration method. These images can be utilized for indoor precise mapping and sophisticated imagebased services. The proposed system is configured with a rotating stereo line camera system, providing stereo omni-directional images appropriate to stable stereoscopy and precise derivation of object point coordinates. Based on the projection model, we derive a mathematical model for the system calibration. After performing the system calibration, we can estimate object points with an accuracy of less than ${\pm}16cm$ in indoor space. The proposed system and calibration method will be applied to indoor precise 3D modeling.

Indoor 3D Modeling Using a Rotating Stereo Frame Camera System and Accuracy Evaluation (회전식 프레임 카메라 시스템을 이용한 실내 3차원 모델링 및 정확도 평가)

  • Kang, Jeongin;Lee, Impyeong
    • Korean Journal of Remote Sensing
    • /
    • v.32 no.5
    • /
    • pp.511-527
    • /
    • 2016
  • We propose a rotating stereo frame camera system to acquire indoor images with a low cost. For experiments, we selected a test site and acquired images using the proposed system and control points using a total station. Using these data, we generated various indoor 3D models using commercial photogrammetric software, PhotoScan. We then performed qualitative and quantitative analysis of the generated indoor 3D models to investigate the possibility of the indoor modeling using the proposed system. From the results, it is confirmed that the generated indoor models using the proposed system can be applicable to the services not inquiring high accuracy.

A study on trend of residual changes in blood and eggs of laying hens after oral administration of quinolones (산란계에서 퀴놀론계 약물투여 후 혈장 및 계란내의 잔류함량 변화추이 조사)

  • Sim Ea-Ran;Kim Mi-Hee;Yoo Eun-Ah;Lee Yun-Jung;Chun Soon-Yong;Moon Soo-Pyeong;Hahm Yoo-Sik
    • Korean Journal of Veterinary Service
    • /
    • v.28 no.3
    • /
    • pp.245-251
    • /
    • 2005
  • The purposes of this study were to evaluate the distribution of quinolone and to investigate the effects of quinolones (enrofloxacin, ciprofloxacin) in blood(plasma) and eggs of laying hens. Animals were fed quinolones which supplemented with 20, 50, 80 mg/kg of body weight. Blood and egg samples were collected after oral administration and analyzed for quinolones (enrofloxacin, ciprofloxacin) by HPLC. In laying hens, the residue period of enrofloxacin were longer than that of ciprofloxacin and the levels of residues were elavated by drug dosage.

Fabrication of SOFC cell by transcription-method (전사법을 이용한 SOFC Cell 제작 및 출력특성)

  • Koo, JaBin;Choi, ByeongHyeon;Ji, MiJeong;An, YongTae;Hwang, HaeJin
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.91.1-91.1
    • /
    • 2011
  • 고체산화물 연료전지(Solid Oxide Fuel Cell이하 SOFC)는 연료가 갖는 화학에너지를 연소과정 없이, 공기와 H2, CO, CH4와 같은 환원성 가스를 공급받아 $600{\sim}1000^{\circ}C$에서 전기화학적 반응을 통하여 직접 전기를 얻는 방식이다. SOFC는 $700^{\circ}C$ 이상의 고온에서 고체산화물이 연료와 공기가 반응하여 전기와 열을 동시에 생산하기 때문에 carnot cycle의 제한을 받지 않아 발전효율이 40% 이상으로 고효율이고, NOx 및 SOx를 배출하지 않아 무공해이며, moving parts가 없어 소음이 나지 않고, 건설과 증설이 지역이나 기후 조건에 제약 없이 용이하고, 다양한 용량이 가능하며, 고가의 백금 촉매를 사용하지 않으며, 수소, 석탄가스, 천연가스 등의 연료를 사용할 수 있는 장점이 있음, 또한 다향한 형태로 제작할 수 있으며 전해질이 고체에서 전해질 손실 및 보충에 문제가 없고 타 연료전지에 비해 개질기가 필요 없어 발전시스템이 간단하고 경량화가 가능하다. 전사법은 paste를 제작하여 전사용지에 Screen printing하여 건조 후 coating하는 방법으로 기존의 여러 coating 방법보다 제작이 용이하고 소재의 크기, 두께조절이 간편하며, 구성층의 표면조도나 굴곡에 대응이 용이한 방법이다. 본 실험에서는 paste 제조, 전사법을 이용하여 Anode, AFL, Electrolyte, CFL, Cathode전사지를 제작하고 이를 세라믹 평관형 지지체에 변수로 두께 조건별 Coating 한 후 $1400^{\circ}C$ 소결을 진행하여 SEM 분석으로 미세구조 관찰, 출력특성 및 Impedance을 확인하였다.

  • PDF