• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.109-110
• /
• 2008

본 논문에서는 900MHz RFID 수동형 태그 전치부를 설계하고 검증하였다. 문턱전압(threshold voltage) 제거 구조의 전압 체배기, 전류를 이용한 복조 회로로 설계되었으며 파워다운 회로를 추가하여 정류동작의 안정성에 중점을 두었다. PWM(Pulse Width Modulation)을 이용한 변조기를 구조로 입력단에 용량성 임피던스의 변화로 변조 동작을 검증하였다. 삼성 0.18um 공정을 이용하였고, 인식거리는 15m, 평균 소모 전력은 약 60uW이며, 패드를 포함한 칩 사이즈는 $1.22mm^2$이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.547-549
• /
• 2002

본 논문에서는 웨이블릿(wavelet) 변환된 영상의 압축 방법으로 사용되는 SPIHT(Set Partitioning In Hierarchical Trees)을 이용하여 워터마크를 삽입하는 방법을 제안하였다. 기존의 특정 대역에만 워터마크를 삽입하는 방법은 화질열화와 압축의 두 가지 문제점을 동시에 해결할 수 없었다. 제안된 방법은 웨이블릿 변환된 영상의 계수 값이 동일한 방향을 갖는 부대역 간에 상관관계를 갖는 점을 이용하여 특정 대역이 아닌 중요 계수에만 워터마크를 삽입하므로써 강인성과 비 가시성이 증가되도록 하였다. 워터마크의 추출은 워터마크된 영상과 PN(Pseudo Noise)코드와의 계수 차를 이용하였으며, 워터마크가 삽입된 영상의 인증을 위해 통계학적인 접근 방법을 사용하였다. 실험을 통하여 워터마크가 삽입된 영상에 대해 손실 압축, 잡음, 크로핑, 리사이즈, 콜루션의 공격을 가한 결과 평균 유사도 값이 0.987의 높은 추출율을 보여 강인성을 입증하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.209-210
• /
• 2018

본 논문에서는 IIoT 환경에서 효율적인 긴급 데이터 패킷 처리를 위한 스케쥴링 방식을 제안한다. 이는 weighted round robin 스케쥴링에 기반하고, 비선점형 시스템에 적용하는 방식으로 처리한다. 긴급 데이터의 평균 큐 사이즈에 따라 적응형으로 중요도를 조절함으로써 최적화시킨다. 이는 적은 패킷 손실률과 작은 딜레이로 이어진다. 이 적응형 스케쥴링 방식은 갑작스런 처리량의 변화에 많은 패킷 손실률과 딜레이 증가량 없이 대처하는 것에 효율적인 해결책이 될 것으로 기대된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.625-628
• /
• 2002

동영상의 장면 전환의 검출은 특정 객체의 검출, 비디오 압축 또는 비디오 문서의 군집화, 비디오 데이터베이스 시스템 등 많은 응용프로그램에서 유용하게 다루어진다. 특히 멀티미디어 데이터베이스에서 이미지를 검출하는 처음 단계로서 Shot Change 검출은 아주 중요하다. 이미 장면 전환의 검출을 위한 여러 알고리즘이 개발되어 발표되었다. 본 논문에서는 대용량의 영상 데이터 사이즈를 고려하여 검출에 소요되는 시간과 검출의 정확도의 상쇄관계를 알아보기 위해서 히스토그램의 분포에 의한 알고리즘과 이미지의 평균과 분산을 이용한 알고리즘을 구현하고 그 알고리즘 간의 성능의 차이를 비교하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.114-129
• /
• 2005

In this paper, we examine Interleaved Polling with Adaptive Cycle Time (IPACT) algorithm which was proposed to control upstream traffic for Gigabit Ethernet-PONs, and we analyze the performance of the gated service and the limited service of the IPACT mathematically. For the mathematical performance analysis, we model IPACT algorithm as a polling system and use mean-value analysis. We divide arrival rate λ value into three regions and analyze each region accordingly. We obtain average packet delay, average queue size and average cycle time of both the gated and the limited service. We compare analytical results with simulation to verify the accuracy of the mathematical analysis. Upon now, simulation analysis have been used to evaluate the performance of EPONs, which require much time sud effort. Mathematical analysis can be widely used in the design of EPON systems since system designers can obtain various performance results rapidly.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.264-269
• /
• 2021

In this study, amorphous aluminum silicate powder was prepared using co-precipitation method, and the influence of spray-dried aluminum silicate granular powder was analyzed and optimized by controlling the amount of aluminum silicate powder and dispersant added to the slurry. As a result, granular powder was optimally produced under the conditions of powder content of aluminum silicate slurry of 27.5 wt% or less, dispersant addition amount of 0.8 wt% or more, pH 6~9. An average particle size of granular powder showed approximately 14 ㎛ at the powder contents of 20 and 22.5 wt% of the slurry, and approximately 19 ㎛ at the powder contents of 25 and 27.5 wt% of the slurry.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.69-73
• /
• 2018

Crystal growth of ${\alpha}-Fe_2O_3$ nanosized particles of 80~90 nm in size, which were hydrothermally prepared from 0.03 M $FeCl_3$ solution at $100^{\circ}C$, was investigated in Pb-containing and Pb-free frit. By heating ${\alpha}-Fe_2O_3$ nanosized particles in two frits at $800^{\circ}C$, the average diameter of particles in frits was increased to 200~210 nm and 150~160 nm, respectively, and the crystal growth due to the aggregation and sintering of several ${\alpha}-Fe_2O_3$ particles was observed. Formation ratios of larger particles over 100 nm in diameter were 54 % in Pb-free frit and 85 % in Pb-containing frit. After heating ${\alpha}-Fe_2O_3$ particles in frits at $800^{\circ}C$, 7~9 nm in average diameter of pores were formed in particles. Theses pores were derived from the porous structure of original ${\alpha}-Fe_2O_3$ particles and confined in particles during sintering.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Korean Journal of Weed Science
• /
• v.31 no.4
• /
• pp.384-393
• /
• 2011

Sulfonylurea herbicide-resistant weeds are spreading widely and distributed about 106,951 hectare in paddy rice fields in Korea. Morever all biotype of Scirpus juncoides which were collected at 69 spots all over paddy rice fields in 2008 were identified biotype of sulfonylurea herbicide-resistant. Benzobicyclon is a p-hydroxyphenylpyruvate dioxygenase (HPPD) inhibitor, which is absorbed through root and basal stem of weeds so cause bleaching of newly developing leaves. Benzobicyclon was very effective to control Scirpus juncoides, Monochoria vaginalis, sedges and broadleaves weeds, so it have been developed various formulation like a suspension concentrate (SC), a water dispersible granule (WG), a granule (GR) and a DT (tablet for Direct application). During recently 6 years, benzobicyclon-mixtures herbicides have been registered over than 54 products in paddy fields. Herbicidal efficacy by formulations of benzobicyclon and its mixture herbicides were highest in DT, followed by SC and GR. Herbicidal efficacy of the kaolin and $CaCO_3$ carrier of GR was better and stable than that of talc and bentonite carrier. Growth and yield of rice were not affected much by formulations, application rates and rice cultivation methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.16-23
• /
• 2003

In this paper, we propose a new optical hybrid switching system that takes advantage of both Optical Burst Switching (OBS) and Optical Circuit Switching (OCS) technologies. This system classifies incoming IP traffic flows into short-lived and long-lived flows for hybrid switching. For performance analysis, we model the system as a single server queue in a Markovian environment. The burst generation process is assumed to follow a two-state Markov Modulated Poisson Process (MMPP), and the service rate fluctuates based on the number of concurrent OCS sessions. Results of the mean delay and queue size for OBS bursts are derived.