• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.151-157
• /
• 2005

For the treatment of regulatory clearance of the soils, a procedure for the radionuclides and radioactivity concentration analysis is under development. A strategy for soil sampling including random sampling after homogenization and standardization was set up. Statistical representativeness is considered for not only sampling strategy but also sample size. In this study, designed sample size was designed with confidence interval and error bound of soil using the pilot samples which were taken following the sampling strategy.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.318-320
• /
• 2011

본 논문은 다중경로 페이딩 채널에서 폐루프 MIMO-OFDM 시스템을 구현할 때 효율적인 피드백 정보를 제공하기 위한 채널 품질 지시자(Channel Quality Indicator, CQI)를 결정하는 방법에 관한 것이다. 다중경로 페이딩에서 OFDM심볼의 부반송파들이 주파수영역에서 서로 다른 채널이득을 경험할 수 있고 여러 채널행렬 중에서 어느 채널행렬에 기반해서 채널 상태를 반영하는 채널대표값을 계산해야 하는지 분명하지 않다. 따라서 수신측에서 송신측으로 피드백하기 위해서 하나의 CQI정보를 생성하는데 필요한 채널 대표값이 필요하다. 채널 대표값을 구할 때 쉽게 생각 할 수 있는 방법인 기준신호의 평균 채널행렬을 이용하는 경우에는 채널상태를 정확히 반영하지 못하고 기준신호의 MMSE검출 후 SNR을 검출하는 방식은 채널상태를 정확히 반영해서 성능을 향상시키지만 많은 연산량을 필요로 한다. 이러한 문제를 해결하기 위해 허미시안 연산된 값을 채널 행렬 평균화해서 채널상태를 정확하게 반영하고 연산량을 줄이는 것에 중점을 두고 있다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.294-299
• /
• 2001

Recently great efforts and investment have been made in order to develop a structural health monitoring technology using fiber optic sensors. Therefore, in this study, we have focused on the development of a fiber optic BOTDA (Brillouin Optical Time Domain Analysis) sensor system in order to measure strains distributed on large structures by an optical fiber. The fiber optic BOTDA sensor was constructed simply, with only two electro-optic modulators. The results of strain measurement tests of an optical fiber showed that the strain can be determined accurately from the Brillouin frequency shift measurement on the strain induced range of 10 m in the total fiber length of 4.8 kIn using 200 averaged signals. Also, the strain sensitivity of Samsung single mode fiber was 4.81 MHz/O.Ol % under the test. test.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.249-255
• /
• 2011

This paper is about the study of a stand-alone photovoltaic power conditioning system with an energy storage system with battery. The paper proposes the appropriate circuit model of stand-alone PV PCS considering the maintenance of the battery system. It also proposes the buck converter modeling by a state-space averaging method considering characteristics of solar cell. Lastly, it shows the way to choose the suitable battery and to design the model of bi-directional converter for charging and discharging battery. PSIM simulation is used to validate the proposed algothim of the system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.74-78
• /
• 2007

Novel concept of sensor mat and its signal processing method is proposed for patient monitoring in medical application. Proposed sensor mat structure has sensing inner layer which has cross-linked arrangement using plastic optical fiber(POF). Large core diameter of plastic optical fiber behaved as band pass filter by averaging the noise component caused by unwanted environmental factors. Signal processor followed by sensor output added noise immune performance by filtering out unwanted component. Fail-proof patient breath monitoring scheme was realized by using intelligent decision algorithm. Unlike the conventional approach by using mechanical sensor, which have high sensitivity both to signal and to environmental noise, our approach provided reliable breath motion detection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.499-502
• /
• 2018

We propose a wireless-powered multihop transmission scheme using inter-node cooperation in a linear network topology. The proposed protocol determines the energy transfer time for each node to make the lifetime of the each node be equal in order to maximize the lifetime of the multihop path. To make the lifetime of each node the same, we apply the flocking algorithm which imitates the behavior of a bird flock flying at the same velocity, so that the lifetime of the nodes is averaged locally. Simulation results show that the proposed algorithm can maximize the lifetime of the multihop path by making all nodes have the same lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.365-369
• /
• 2012

It is very important to control synchronization by inter-network delay compensation in high speed synchronous optcial transmission network systems. In this study we designed a delay measurement system based on OTDR using Rayleigh backscatterer in order to compensate for time delay due to the length of optical fiber line. We observed waveform variations on both averaging time and peak power of laser pulse. Finally, we executed experimental demonstration on its accuracy and test repeatability by comparison to the methods practically used in the industry. Experimental results show maximum error of 0.06usec and standard deviation of 0.021usec, which means it's possibly applied to delay control system for mobile repeaters and stations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1107-1110
• /
• 2002

본 논문에서는 현재 컨텐츠에 대한 저작권보호 기술로 활발히 연구되고 있는 워터마킹 기술과 핑거프린팅 기술에 대해 알아보고 핑거프린팅 기술의 구현시 문제시 되고 있는 공모공격의 유형을 분석한다. 워터마킹 기술은 소유권주장이 목표인 반면 핑거프린팅 기술은 사용자인증을 목표로 하는 것이 다르다. 즉, 판매되는 컨텐츠에 구매자(사용자)의 정보를 워터마크로 삽입한 후 배포하고 후에 불법복제가 의심되는 컨텐츠에 대해 적법구매자의 워터마크를 추출하여 불법재분배를 증명한다. 이는 불법복제가 어느 구매자로부터 이루어졌는지의 추적이 가능하게 한다. 하지만 핑거프린팅 기술은 워터마킹 기술과는 다르게 구매자 정보를 워터마크로 사용하기 때문에 마크가 삽입된 컨텐츠마다 서로 다르다는 특징을 갖는다. 의도적인 공격자는 이 특성을 이용하여 여러개의 핑거프린팅된 컨텐츠를 공모(collusion)하여 워터마크를 제거하기 위한 다양한 공격(attack)을 가할 수 있다. 평균화(averaging)공격과 모자익(mosaiking)공격이 공모공격의 대표적인 방법으로, 본 논문에서는 이러한 공격유형을 분석하고 공모공격에 강인한 핑거프린팅 삽입/추출방법을 고찰한다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.120-125
• /
• 2009

For effective noise removal prior to video processing, noise power or noise variance of an input video sequence needs to be found exactly, but it is actually a very difficult process. This paper presents an accurate noise variance estimation algorithm based on motion compensation between two adjacent noisy pictures. Firstly, motion estimation is performed for each block in a picture, and the residue variance of the best motion-compensated block is calculated. Then, a noise variance estimate of the picture is obtained by adaptively averaging and properly scaling the variances close to the best variance. The simulation results show that the proposed noise estimation algorithm is very accurate and stable irrespective of noise level.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.67-74
• /
• 2004

In this paper, a 3.3V 8-bit 500MSPS based on an interpolation architecture CMOS A/D converter is designed. In order to overcome the problems of high speed operation, a novel pre-amplifier, a circuit for the Reference Fluctuation, and an Averaging Resistor are proposed. The proposed Interpolation A/D Converter consists of Track ＆ Hold, four resistive ladders with 256 taps, 128 comparators, and digital blocks. The proposed A/D Converter is based on 0.35um 2-poly 4-metal N-well CMOS technology. The A/D Converter dissipates 440 mW at a 3.3 Volt single power supply and occupies a chip area of 2250um x 3080um.