• Clinical and Experimental Pediatrics
• /
• v.45 no.11
• /
• pp.1397-1402
• /
• 2002

Purpose : One of the major complication of arterial catheterization is the thrombosis of the iliac or femoral arteries. Tissue loss following femoral artery catheterization is rare. However longterm sequelae such as impaired limb growth and future impairment of vascular access, are also important in pediatric cardiac patients. But standard methods to treat thrombotic complication of arterial catheterization in infants and children is not established. The present study was performed to assess the efficacy of intraarterial catheter-directed urokinase infusion in infants and children with limb ischemia due to arterial thrombosis after cardiac catheterization. Methods : From January 1994 to August 2002, 12 patients with thrombotic femoral artery occlusion after arterial catheterization were treated with catheter-directed urokinase infusion in Dong-A University Hospital. Retrospective analysis of the medical records and angiograms was conducted. Results : The incidence of femoral artery thrombosis after retrograde arterial catheterization, which had not responded to systemic infusion of heparin and/or urokinase, was 2.8 percent. The doses of urokinase were 1,000-4,400 unit/kg/hr and duration of infusion was $50.6{\pm}29.2$ hours(18-110 hours). Clot resolution was complete in all patients who started to receive the intraarterial urokinase infusion within four days after catheterization. Only partial thrombolysis was seen in two patients who were treated with intraarterial urokinase on the 12th and 19th days after thrombus formation. Balloon angioplasty was done for these two patients with partial success. Bleeding complications were seen in two cases. Conclusion : Early use of catheter-directed intraarterial infusion of urokinase is safe and effective in thrombolysis of femoral artery occlusion after cardiac catheterization in infants and children.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.292-292
• /
• 2009

본 연구는 유기종자 안전 생산기술 개발을 위한 효과적인 병해충 제어를 위해 대표적인 찰옥수수 품종인 미백2호와 흑미찰을 대상으로 병?해충 발생양상을 조사하였다. 2008년 유기농 찰옥수수 종자 생산지의 우점 비산포자의 종류 중Alternaria sp., Cladosporium sp., 및 Helminthosoprium sp.,은전 생육기간에 관찰되었다. 또한종자로부터 신초 출현 전후로 종자가 발아하지 않고 부패하거나 유묘의 시들음 증상, 심하면 고사하는 증상과 거세미나방에 의해 지재부가 절단된 전형적인 피해를 관찰할 수 있었고 발병주율은 14~6% 미만이었다. 특히, 포장내 조명나방 발생밀도는 2008년 트랩당 3.5~0.5 마리로 높게 나타났으며, 2009년 트랩당 0.5~6마리로 낮게 나타났다. 또한 피해주율은 2008년은 7.5(미백2호)~21(미흑찰)%였으며, 2009년은 1~46%로 매년 높은 피해주율을 보였으며 수확기까지 지속적으로 증가하였다. 옥수수잎마름병 (Leaf blight)의 발생 양상은 2008년도에 7%(미흑찰)~34%(미백2호)로 높게 나타났으며, 2009년은 6월18일 이후 초발생하여 발병주율이 8월 21일 (59%, 미흑찰)이후 급격히 증가하여 9월 25일이는 미흑찰 (69%)의 발병주율이 미백2호 (56%)보다 높게 나타났다. 옥수수깜부기병(Common Smut)의 발생 양상은 2008년도에 20주 중 2%~15%의 발병주율을 보였으며, 2009년은 초발생 시기가 7월17일로 2008년에 비해 17일 정도 늦추어졌으며 발병주율도 8% 미만 (9월 25일)으로 2008년에 비해 아주 낮게 나타났다. 옥수수깨씨무늬병 (Southern Leaf Spot)의 발생 양상은 2008년 20주 중 초기에 평균 11%(미흑찰)에서 증가하여 9월 19일 조사시에는 두 품종 모두 62%로 높게 나타났다. 2009년은 6월8일 이후 초발생하였으며 9월 25일까지 지속적 발병하여 약 86%의 발병 주율을 보였고 2008년에 비해 24% 이상 발병주율이 높았다.

• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.48-54
• /
• 1997

Between 1987 and 1995, eleven patients with severe chronic corrosive stenosis of the hypopharynx and esophagus underwent surgical restoration of digestive continuity at Inje University Seoul Palk Hospital. There were 7 male and 4 female patients aged from 21 to 47 years (mean, 34 years). The caustic material was acid in 6 patients and alkali in 5 patients. The esophagus was reconstructed using the right colon In 9 and left colon in 2. The cervical approach and the side of proximal anastomosis depended on the status of the pyriform slnus of the hypopharynx. In the neck, J-formed incision was made along the sternocleidomastoid muscle. The sternohyoid and thyrohyoid muscles were divided transversely to expose the thyroid cartilage. Hypopharyngeal opening for proximal anastomosis was made by reverse triangular formed resection of the thyroid cartilage after elevation of perichondrium. Immediately after operation, dysphagia and aspiration into trachea were common, so training of swallowing was required. Feeding gastrostomy was usually maintained for 3 months until restoration of swallowing function was confirmed . There was graft necrosis in 3 patients, who were treated with jejunal free graft. Revisional procedures for stenosis of cervical anastomosis in B patients consisted of widening of pharyngocecostomy site in 2 and resection of adhesive band in one. Return of normal swallowing assuring normal nutrition was obtained in 10 of 11 cases.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.535-543
• /
• 2013

The objective of this study was to analyse the residual stress in Larix kaempferi board during and after kiln-drying. The boards were primarily intended for using as laminar of cross laminated timber (CLT). In this study, the equivalence of moisture content by equalizing treatment was proved and reduction of residual stress by conditioning treatment was quantified. Prong test and slice test were carried out to analyse the residual stress in wood during drying. Transverse casehardening was measured immediately after making prong sample. Residual stress of four parts in wood from surface to center was analyzed quantitatively based on elastic deformation after just cutting slices from board. Tensile stress and compressive stress on the surface of board during drying did not exceed 2.2 MPa when boards were dried by kiln-drying schedule of T10-C4 and T12-D5. Because the tensile strength and compressive strength of transverse direction of Larix kaempferi lumber are 2.65 MPa and 4.60 MPa, application of more severe drying schedule can be recommended. Cup and twist were reduced by about 40% by equalizing and conditioning treatments after drying.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.604-610
• /
• 2005

This study was to evaluate the effects of several light curing units on the microleakage of composite resin restorations in primary teeth. The types of curing units were traditional low intensity halogen light(Optilux 360), plasma arc light(Filpo) low heat plasma arc light(Aurys) and high intensity LED(Freelight 2). After preparing cavities on sound primary teeth, cavities were filled with composite resin(Z100) using the same resin bond agent(Scotchbond Multi-Purpose) and were cured with each curing light system. After storing each specimen in sterile water for 24 hours, thermal circulation was done 1,000 times followed by pigmentation using 2% methylene blue solution. Each specimen was sliced and the degree of pigmentation was graded. When microleakage is graded, the average of Aurys was 0.95 which was the lowest and Freelight 2(1.05), Filpo(1.25), Optilux 360(1.30) followed. But values were not shown statistically significant difference (P>0.05). The results suggest that the newly developed curing units which has advantage in children by decreasing discomfort and procedure time can increase the microleakage of the composite resin.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.41-56
• /
• 2018

The purpose of this study was to provide clinical recommendations for restoration with selection of the most similar zirconia crown by 3-dimensional analysis of the shape of the maxillary primary central and lateral incisors in Korean individuals and prefabricated zirconia crowns. The average shape of the sound maxillary primary central and lateral incisors in 300 children was reproduced by 3-dimensional scanning. Zirconia crowns of 4 manufacturers (NuSmile $ZR^{(R)}$ Crown, Cheng $Crowns^{(R)}$, Kinder $Krowns^{(R)}$, and EZ $Pedo^{(R)}$ Crown) were scanned 3-dimensionally, and coordinates for comparison of the shape were measured to evaluate the similarity between the teeth and crowns. The most similar crowns were selected by comparing the mesiodistal length, crown height, crown shape ratio, distance between the same coordinates of a tooth and crown, the radius of curvature of the labial surface, and the volume. As a result of analysis, Cheng $Crowns^{(R)}$ size 3 and NuSmile $ZR^{(R)}$ Crown size 2 were the most similar crowns in the maxillary primary central and lateral incisors, respectively. Scanning the inner surface of the crowns and evaluating the amount of tooth reduction required suggested that an overall lesser amount of tooth reduction compared to that presented by the manufacturer's guidelines should be performed.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2003

Pink rot of potato (Solanum tuberosum L.) occurred at Pyeongchang in Gangwon and at Bosung in Junnam province since 1999. The disease incidence in the surveyed areas was about 5% of harvested potatoes in 2002. Affected tubers showed a dull brown appearance and the lenticels and eyes on tubers turned dark brown. The cut surface of the diseased tuber colored faint pink and the entire surface of the diseased tuber becomes deep salmon pink within 30 min. The pathogen isolated from the diseased tubers was identified as Phytophthora erythroseptica based on morphological and cultural characteristics. Mycelial mat was fairly fluffy, rosette or stellate patterns and rounded or angular hyphal swellings were farmed in water, Temperature for mycelial growth was ranged from 5 to 3$0^{\circ}C$ and optimal temperature was $25^{\circ}C$. Non-papillate sporangia were persistent on stalk and ellipsoid, ovoid, obpyriform or distorted in shape, often with a constriction distal in the middle. Size of sporangia was 41.3~69.6$\times$26.8~47.4 (av, 55.5$\times$37.1) ${\mu}{\textrm}{m}$. Sexuality of Phytophthora erythroseptica was homothallic. Oogonia were 30~46 ${\mu}{\textrm}{m}$ in diameter and oospores were 28~35 ${\mu}{\textrm}{m}$ in diameter, Elongated or cyclindrical antheridia were all amphigynous. This is the first report on potato pink rot caused by Phytophthora erythroseptica in Korea.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.364-370
• /
• 2009

The aim of this study was to evaluate the effect of fiber direction on the polymerization shrinkage of fiber-reinforced composite. The disc-shaped flowable composite specimens (d = 10 mm, h = 2 mm, Aeliteflo A2, Bisco, Inc., IL, USA) with or without glass fiber bundle (X-80821P Glass Fiber, Bisco, Inc., IL, USA) inside were prepared, and the longitudinal and transversal polymerization shrinkage of the specimens on radial plane were measured with strain gages (Linear S-series 350${\Omega}$, CAS, Seoul, Korea). In order to measure the free polymerization shrinkage of the flowable composite itself, the disc-shaped specimens (d = 7 mm, h = 1 mm) without fiber were prepared, and the axial shrinkage was measured with an LVDT (linear variable differential transformer) displacement sensor. The cross-section of the polymerized specimens was observed with a scanning electron microscope to examine the arrangement of the fiber bundle in composite. The mean polymerization shrinkage value of each specimen group was analyzed with ANOVA and Scheffe post-hoc test (${\alpha}$=0.05). The radial polymerization shrinkage of fiber-reinforced composite was decreased in the longitudinal direction of fiber, but increased in the transversal direction of fiber (p<0.05). We can conclude that the polymerization shrinkage of fiber-reinforced composite splint or restoratives is dependent on the direction of fiber.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.3
• /
• pp.265-273
• /
• 2019

This study was performed to evaluate clinical use of laser fluorescence (LF) to identify early childhood caries lesions suitable for applying resin infiltration. 20 exfoliated primary molars with proximal caries were selected and cut buccolingually cross the central pit for regarding the mesial and distal surfaces respectively. 27 specimens corresponding to ICDAS code 1 and 2 were selected and the LF values were measured. When infiltrant resin was applied, double staining for microscopy detection has done simultaneously. Tooth samples were sliced with 0.7 mm thick. The maximum lesion depth, maximum penetration depth, and average penetration rate were measured from the confocal scanning laser microscope image. Pearson correlation analysis was performed. The intraclass correlation coefficient of LF values shows excellent agreement. LF values had positive correlation with penetration rate, but not lesion depth and penetration depth. Significant correlation between LF readings and penetration rate was verified in deep enamel caries and dentin caries except shallow enamel caries. Infiltrant resin could penetrate with a higher rate and LF values could be increased in more active caries lesions. In assessing radiologically similar caries lesion, laser fluorescence might be useful for identifying caries activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.368-377
• /
• 2021

Plum is a typical fruit that is consumed processed rather than raw. In this study, we manufactured one of the processed foods, viz., plum Jangachi. In this process, the manpower-dependent seed separation and flesh cutting operations were automated by mechanizing, thereby altering the manufacturing process. Quality and Safety were assessed through microbial evaluation, analysis of color, and detection of preservatives in the plum Jangachi. Preference factors were identified through sensual evaluation. When compared with other plum Jangachi currently available in the market, our product was determined to contain 2.7±0.1 Log CFU/g total aerobic bacteria, which is slightly higher than the average of other products. This was not surprising, as the figures are due to the inherent characteristics, which were determined to be lower as compared to other commercial plum Jangachi. Other coliforms, tar dyes, and preservatives were undetected, thereby conferring satisfactory Quality and Safety. In general, there was no statistical difference in the sensual evaluation and appearance; overall, our product received better feedbacks than products on the market. Taken together, our results provide a foundation for applying the mechanization of plum-processed foods, thereby promoting the local economy in the main production area, and overall characteristics obtained are regarded sufficient in terms of market competitiveness.