• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.687-695
• /
• 2022

To find a 3D printer material that can replace lead used as a shield for high-energy electron beam treatment, the shielding composites were simulated by using MCNP6 programs. The Percent Depth Dose (PDD), Flatness, and Symmetry of linear accelerators emitting high-energy electron beams were measured, and the linear accelerator was compared with MCNP6 after simulation, confirming that the source term between the actual measurement and simulation was consistent. By simulating the lead shield, the appropriate thickness of the lead shield capable of shielding 95% or more of the absorbed dose was selected. Based on the absorption dose data for lead shield with a thickness of 3 mm, the shielding performance was analyzed by simulating 1, 5, 10, and 15 mm thicknesses of ABS+W (10%), ABS+Bi (10%), and PLA+Fe (10%). Each prototype was manufactured with a 3D printer, measured and analyzed under the same conditions as in the simulation, and found that when ABS+W (10%) material was formed to have a thickness of at least 10mm, it had a shielding performance that could replace lead with a thickness of 3mm. The surface morphology and atomic composition of the ABS+W (10%) material were evaluated using a scanning electron microscope (SEM) and an energy dispersive X-ray spectrometer (EDS). From these results, it was confirmed that replacing the commercialized lead shield with ABS+W (10%) material not only produces a shielding effect such as lead, but also can be customized to patients using a 3D printer, which can be very useful for high-energy electron beam treatment.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.249-255
• /
• 2022

In this study, a new method for the analysis of high-purity nitrogen was developed. A gas chromatography-flame ionization detector (GC-FID) was used for purity analysis. Certified reference materials (CRMs) at a level of 3 µmol/mol of carbon monoxide (CO), carbon dioxide (CO₂), and methane (CH₄), which may exist in high-purity nitrogen, were prepared using the gravimetric method, and these CRMs were used for purity analysis. In this new method, ultra-high-purity and high-purity nitrogen were used as carrier gases. The impurities in high-purity nitrogen were quantitatively analyzed by comparing the differences in the area values of the GC chromatograms of the prepared CRMs. We purchased liquid nitrogen and three bottles of nitrogen gas, which were produced by three different manufacturers, using high-purity nitrogen. Furthermore, to validate the developed purity analysis method, the fraction of impurities in high-purity nitrogen was compared with the results of the typical purity analysis method. The comparison results were consistent within the expanded uncertainties (k = 2).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.47-54
• /
• 2021

In this study, the performance of a honeycomb-type hydrogen oxidation catalyst to remove hydrogen in a hydrogen economy society to secure leaking hydrogen. The Pd/TiO₂ catalyst was prepared based on a liquid phase reduction method that is not exposed to a heat source, and it was showed through H₂-chemisorption analysis that it existed as very small active particles of 2~4 nm. In addition, it was found that the metal dispersion decreased and the active particle size increased as the reduction reaction temperature increased. It was meant that the active metal particle size and the hydrogen oxidation performance were in a proportional correlation, so that it was consistent with the hydrogen oxidation performance reduction result. The prepared catalyst was coated on a support in the form of a honeycomb so that it could be applied to the hydrogen industrial process. When 20 wt% or more of the AS-40 binder was coated, oxidation performance of 90% or more was observed under low-concentration hydrogen conditions. It was showed through SEM analysis that long-term catalytic activity can be expected by enhancing the adhesion strength of the catalyst and preventing catalyst desorption. It is a basic research that can secure safety in a hydrogen society such as gasification, organic resource, and it can be utilized as a system that can respond to unexpected safety accidents in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.712-720
• /
• 2022

In this study, we evaluated the production and photoreactivity of CDOM of two polar phytoplanktons - Phaeocystis antarctica and Phaeocystis pouchetii, in order to find out UV effects on phytoplanktons. In visible region, CDOM in media of both phytoplanktons under UV-R decreased during 48hrs incubation period. However, in UV region CDOM decreased 30 % in the media of P. antarctica, but increased 10% in media of P. pouchetii, compared to CDOM concentrations of control after 48 hr incubation. This result indicates that biota in polar environment would not well protected from UV-R harmful effect when P. antarctica is dominant because of loss of CDOM, but when P. pouchetii is dominant species, production of UV absorbing organic matter could play more efficiently for UV screening for marine biota. Also we confirmed that FDOM of humic substance (C-peak) produced by these phtoplanktons under UV-R stress were well matched with fluorescence characteristics of the UV-protecting compound, MAAs. This finding shows that Phaeocystis pouchetti with low photoreactivity would contribute to DOM pool of polar marine environment under stratification by global warming.

• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.312-326
• /
• 2022

The generalized Hoek-Brown (GHB) criterion, which is recognized as one of the standard failure conditions for rock mass, is specialized for rock engineering applications and covers a wide range of rock mass conditions. Accordingly, many research efforts have been devoted to the incorporation of this criterion into the stability analysis of rock structures. In this study, the slip-line analysis method, which is a kind of elastoplastic analysis method, is combined with the GHB failure criterion to derive analytical equations that can easily calculate the plastic radius and stress distribution in the vicinity of the circular tunnel. In the process of derivation of related formulas, it is assumed that the behavior of rock mass after failure is perfectly plastic and the in-situ stress condition is hydrostatic. In the formulation, it is revealed that the plastic radius can be calculated analytically using the two respective tangential friction angles corresponding to the stress conditions at tunnel wall and elastic-plastic boundary. It is also shown that the plastic radius and stress distribution calculated using the derived analytical equations coincide with the results of Lee & Pietruszczak's numerical method published in 2008. In the latter part of this paper, the influence of the quality of the rock mass on the size of the plastic zone, the stress distribution, and the change of the tangential friction angle was investigated using the derived analytical equations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.790-799
• /
• 1997

Aegilops genus is known to include the donor species of the Band D genome of the bread wheat(ABD). An effort to establish a better strategy for phylogenetic relationships about Aegilops polyploids by AFLPs(Amplified Fragment Length Polymorphisms) was conducted using the 19 Aegilops sPP. and T. aestivum. The 207 polymorphic bands from the amplified products on the 6% acrylamide denaturing sequencing gels were obtained with the 7 AFLP primer combinations, and used to account for the genetic similarities and cluster analysis using NTSYS program. According to the genome analysis, the $M^h$-genome of Ae. heldreichii was estimated as an intermediate genome between the M-genome of Ae. comosa and N-genome of Ae. uniaristata and supposed to be incorporated in the establishing process of UM-genome as a possible diploid donor. And Ae. ventricosa(DN) was more close to Ae. umbellulata(U) than Ae. squarrosa(D). The close relationship between Ae. squarrosa and T. aestivum was perceived as a diploid donor of D-genome. As for the polyploid species, hexaploid Ae. triaristata was more closely related to Ae. columnaris rather than tetraploid Ae. triaristata. The clustered groups were, basically same to the previous Gihara's sections based on phenotypes and pairing analysis of interspecific hybrids. AFLP was evaluated as an efficient and powerful method in the genome evaluation of closely related species.

• Journal of the Korean earth science society
• /
• v.44 no.2
• /
• pp.135-147
• /
• 2023

Satellite-observed significant wave heights (SWHs), which are widely used to understand the response of the ocean to climate change, require long-term and continuous validation. This study examines the accuracy and error characteristics of SWH observed by nine satellite altimeters in the North Pacific and North Atlantic Ocean for 25 years (1992-2016). A total of 137,929 matchups were generated to compare altimeter-observed SWH and in-situ measurements. The altimeter SWH showed a bias of 0.03 m and a root mean square error (RMSE) of 0.27 m, indicating relatively high accuracy in the North Pacific and North Atlantic Ocean. However, the spatial distribution of altimeter SWH errors showed notable differences. To better understand the error characteristics of altimeter-observed SWH, errors were analyzed with respect to in-situ SWH, time, latitude, and distance from the coast. Overestimation of SWH was observed in most satellite altimeters when in-situ SWH was low, while underestimation was observed when in-situ SWH was high. The errors of altimeter-observed SWH varied seasonally, with an increase during winter and a decrease during summer, and the variability of errors increased at higher latitudes. The RMSEs showed high accuracy of less than 0.3 m in the open ocean more than 100 km from the coast, while errors significantly increased to more than 0.5 m in coastal regions less than 15 km. These findings underscore the need for caution when analyzing the spatio-temporal variability of SWH in the global and regional oceans using satellite altimeter data.

• Journal of the Daesoon Academy of Sciences
• /
• v.44
• /
• pp.263-297
• /
• 2023

This study aims to understand human nature in Daesoon Thought. In addition, it seeks to determine the characteristics of human nature and how the theory of human nature in Daesoon Thought relates to the direction of the Basic Works and the Three Major Societal Works of Daesoon Jinrihoe. In order to understand the theory of human nature in Daesoon Thought, I have classified various theories of human nature that appear in the Confucian tradition and have analyzed and reviewed them. I used this framework of types as a methodological criterion to study the theory of human nature found in Daesoon Thought. In Daesoon Thought, human nature is defined clearly as the conscience that is honest and truthful. Also, it accepts humans' basic biological needs, the pursuit of clothing, food, and sexual desires as part of human nature. This view can be evaluated as quite similar, although not perfectly consistent, with the theory of human nature posited by Wang Fuzhi (王夫之), who defined human nature as a combination of morality and biological desires. The theory of human nature in Daesoon Thought emphasizes human morality, but at the same time, it fully accepts that biological needs are basic elements of human life. In addition, it shows a characteristic that strongly implies a religious tendency as it recognizes that human nature is internalized through divine commands issued by the Supreme God of the Ninth Heaven (九天上帝 Gucheon Sangje), the transcendent and absolute ruler. The Basic Works of Daesoon Jinrihoe, which are Propagation, Edification, and Cultivation, aim to restore human nature to its innate state of honesty and truthfulness. Among the Three Major Societal Works, we can see that the works of Social Welfare and Charity Aid are implemented in accordance with the accepting acknowledgment of basic human needs (the pursuit of clothing, food, and sexual desires), and helping people meet their needs in appropriate ways and to appropriate degrees.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.3
• /
• pp.184-194
• /
• 2023

In this study, we investigated whether p-anisaldehyde (PAA), the main component of essential oils derived from anise seeds, influences the differentiation of mouse C2C12 myoblasts. Cells were induced to differentiate over 5 days using a differentiation medium with or without PAA (50 or 200 mg/mL). Myotube length and diameter were measured, and the expressions of myogenic markers (myoblast determination protein 1, myogenin, myocyte enhancer factor 2, muscle creatine kinase, and myosin heavy chain) and atrophy-related genes (atrogin-1 and muscle ring finger-1 [MuRF-1]) were assessed by quantitative real-time polymerase chain reaction. Additionally, protein kinase B (Akt) phosphorylation was monitored by western blotting. PAA significantly induced the formation of smaller and thinner myotubes and reduced myogenic marker expression. Furthermore, PAA increased the expressions of atrogin-1 and MuRF-1 and simultaneously reduced Akt phosphorylation. Our findings indicate that PAA inhibits the myogenic differentiation of C2C12 cells by reducing the phosphorylation and activation of Akt.