• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1064-1073
• /
• 2002

In this paper, we design and implement the Wireless Transaction Protocol (WTP) proposed by the Wireless Application Protocol (WAP) forum using a protocol development tool, SDL Development Tool (SDT). And we conduct a comparative performance evaluation of the WTP implementation with other three implementations that are based on different implementation models respectively: the server model, the coroutine model, and the activity-thread model. To implement WTP, we first use Unified Modeling Language (UML) for analyzing the protocol requirement and defining the protocol engine architecture. Next, we use Software Development Language (SDL) to design the protocol engine in details and then generate the WTP implementation automatically with the aid of SDT The code size of the WTP implementation generated by SDT is 62% larger than the other three implementations. However, its throughput and system response time for transaction processing is almost equal to the other three implementations when the number of concurrent clients is less than 3,000. If more than 5,000 concurrent clients tries, the transaction success rate abruptly decreases to 10% and system response time increases to 1,500㎳, due to the increased protocol processing time. But, it comes from the fact that the load overwhelms the capacity of the PC resource used in this experimentation.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.28-35
• /
• 2024

Corrosion inside electronic packages significantly impacts the system performance and reliability, necessitating non-destructive diagnostic techniques for system health management. This study aims to present a non-destructive method for assessing corrosion in copper interconnects using the Smith chart, a tool that integrates the magnitude and phase of complex impedance for visualization. For the experiment, specimens simulating copper transmission lines were subjected to temperature and humidity cycles according to the MIL-STD-810G standard to induce corrosion. The corrosion level of the specimen was quantitatively assessed and labeled based on color changes in the R channel. S-parameters and Smith charts with progressing corrosion stages showed unique patterns corresponding to five levels of corrosion, confirming the effectiveness of the Smith chart as a tool for corrosion assessment. Furthermore, by employing data augmentation, 4,444 Smith charts representing various corrosion levels were obtained, and artificial intelligence models were trained to output the corrosion stages of copper interconnects based on the input Smith charts. Among image classification-specialized CNN and Transformer models, the ConvNeXt model achieved the highest diagnostic performance with an accuracy of 89.4%. When diagnosing the corrosion using the Smith chart, it is possible to perform a non-destructive evaluation using electronic signals. Additionally, by integrating and visualizing signal magnitude and phase information, it is expected to perform an intuitive and noise-robust diagnosis.

• Journal of the Korean Academic Society of Industrial Cluster
• /
• v.1 no.1
• /
• pp.1-15
• /
• 2007

Regional innovation and cluster policies are the new agenda of regional policy, an agenda that began to spread over recent years throughout different countries and regions. In this context, our main question arises: how are we going to evaluate regional innovation and cluster policies? What models and methods are we going to use? Since 1990, regional and national governments have put more emphasis on evaluation as a tool directed to produce knowledge to design better policies. The objective of this article is to summarise the main challenges arising from the evaluation of regional innovation and cluster policies and make some methodological proposals that can contribute to produce better evaluations. In the first section, there is a brief presentation of regional innovation and cluster policies, followed by a more detailed analysis, in the second section, of their principal characteristics and of the main challenges posed by their evaluation. In the third section, some evaluation proposals that can help to improve current evaluation practice are presented. The paper concludes with a short number of general recommendations that we should bear in mind when designing an evaluation of regional innovation and cluster policies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.289-296
• /
• 2021

The Korean construction industry has been implementing G-SEED, a certification system that evaluates the environmental properties of buildings for the purpose of reducing environmental burdens such as energy and resource consumption and pollutant emissions. Also, creating a pleasant environment in general is one more purpose of G-SEED certification system. However, G-SEED certification in practice is difficult and time consuming due to the complexity of the certification acquisition process coupled with little economic consideration for the materials of each certification item. Therefore, in this study, we present a model for the optimal selection of materials and economic assessment using a genetic algorithm. The development of the model involves building a material database based on life-cycle costing (LCC) targeted at "Application of Indoor Air Pollutant Low Emission Material" from G-SEED. Next, the model was validated using a real non-residential building case study. The result shows an average cost reduction rate of 74.5 % compared with the existing cost. This model is expected to be used as an economically efficient tool in G-SEED.

• Bulletin of Food Technology
• /
• v.10 no.1
• /
• pp.115-120
• /
• 1997

면역분석법(immunoassay)은 aflatoxin류, deoxynivalenol(DON), zearalenone(ZEA), fumonisin류 등을 포함하는 다양한 진균독소분석에 적용되고 있다. 이들 분석법을 이용하여 여러 종류의 matrix내에 존재하는 물질들을 분석할 수 있다. 그리고 많은 시료를 빨리 분석해야 하는 경우에 이 방법이 적용되고 있다. 상업적인 면역화학적 분석키트들은 흔히 검출감도(sensitivity), 특이성(specificity), 재현성(reproducibility), 비용(cost), 안정성(stability), 편리성(ease of use)등의 관점에서 평가된다. 실험실적으로 품질보증을 위하여 표준곡선과 양성대조구 등에 대한 사전 검토가 필수적이다. 또한 높은 농도의 분석물의 경우에는 matrix에서 기인한 간섭때문이 아닌지를 구분하는 것도 중요하다. 본문에서 곡류와 곡류가공품 및 특정의 감시대상물 질내 aflatoxin류, DON, ZEA 그리고 fumonisin류와 같은 진균독소의 분석에 면역화학적 방법을 사용하여 얻어진 공동연구의 결과에 대한 해석기준이 제시된다. 또한 yes/no로 구분해야 하는 정성시험의 결과해석에 필요한 기준이 제시된다. 진균독소의 면역분석법을 평가하기 위한 몇몇기준들과 그 방법들을 감시도구로 사용하는 예는, 식품중의 잔류농약을 검출하기 위한 접근방법과 유사한 모델로서 활용될 수 있을 것이다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.27-28
• /
• 2024

고령화 사회가 도래함에 따라 낙상은 심각한 사회 문제로 대두되고 있다. 그러나 낙상 위험 예측 및 평가 도구의 한계가 여전히 존재하고 있어 정확하고 신뢰성 있는 낙상 평가 방법을 필요로 한다. 본 연구에서는 신체 다양한 부위에 부착되어 수집된 센서 데이터를 이용하여 낙상을 검출하고 낙상의 방향까지 실시간으로 분류하는 모델들을 구축 및 평가한다. 이는 낙상의 유형에 따른 신속한 조치가 가능하도록 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.100-109
• /
• 2019

Maintainability indicates the extent to which maintenance can be done easily and quickly. The consideration of maintainability is crucial to reduce the operation and support costs of weapon systems, but if the maintainability is evaluated after the prototype production is done and necessitates design changes, it may increase the cost and delay the schedule. The evaluation should verify whether maintenance work can be performed, and support the designers in developing a design to improve maintainability. In previous studies, the maintainability index was calculated using the graph theory at the early design phase, but evaluation accuracy appeared to be limited. Analyzing the methods of evaluating the maintainability using fuzzy logic and 3D modeling indicate that the design of a system with good maintainability should be done in an integrated manner during the whole system life cycle. This paper proposes a method to evaluate maintainability using SysML-based modeling and simulation technique and fuzzy logic. The physical design structure with maintainability attributes was modeled using SysML 'bdd' diagram, and the maintainability was represented by an AHP matrix for maintainability attributes. We then calculated the maintainability using AHP-based weighting calculation and fuzzy logic through the use of SysML 'par' diagram that incorporated MATLAB. The proposed maintainability model can be managed efficiently and consistently, and the state of system design and maintainability can be analyzed quantitatively, thereby improving design by early identifying the items with low maintainability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.796-805
• /
• 2016

As a part of the first stage in the helicopter flight simulator development, this study numerically evaluates handling qualities of the dynamics model. The flight dynamics model was generated using public information for AS365 N2, the target aircraft of the simulator. The flight simulator is under development as a pilot training and research tool for firefighting missions. The assessment of the model intends to validate general characteristics and suitability before the model is enhanced with flight test data. The evaluation is based on the ADS-33E-PRF(Aeroautical Design Standard Performance Specification Handling Qualities Requirement) criteria, with consideration of category of the aircraft, missions, and environment. The numerical operations follow required or recommended procedures of flight test for compliance demonstration. Evaluation results are evaluated according to the rating specified in maneuverability ADS-33E-PRF. Results have identified to provide a satisfactory platform for flight dynamic model in the general helicopter simulator generated based on the RotorLibFDM, and can be used as a base for basic training and research.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.157-164
• /
• 2010

While both functional verification and performance evaluation of a system are necessary for the development of effective and reliable communication systems, they have been usually performed individually through functional modeling with formal language tools and performance modeling with professional network performance evaluation tools, respectively. However, separate and duplicated modeling of a system may cause increase of the cost and inconsistency between the models. In order to overcome this problem, this paper proposes an integrated design technique that estimates the performance of a communication protocol designed in SDL with SDL-OPNET co-simulation. The proposed technique presents how to design a co-simulation system with the environment functions of Tau and the external system module of OPNET. InRes protocol was used as an example to show the applicability and usefulness of the proposed technique.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.62.2-62.2
• /
• 2019

한국의 고천문 자료는 삼국시대 이후 근대 조선까지 다수가 존재하여 세계적으로 드문 기록 문화를 보유하고 있으나, 한문 번역이 많이 이루어지지 않아 학술적 활용이 활발하지 못한 상태이다. 고문헌의 한문 문장 번역은 전문인력의 수작업에 의존하는 만큼 소요 시간이 길기에 투자대비 효율성이 떨어지는 편이다. 이에 최근 여러 분야에서 응용되는 인공지능의 적용을 대안으로 삼을 수 있으며, 초벌 번역 수준일지라도 자동번역기의 개발은 유용한 학술도구가 될 수 있다. 한국천문연구원은 한국정보화진흥원이 주관하는 2019년도 Information and Communication Technology 기반 공공서비스 촉진사업에 한국고전번역원과 공동 참여하여 인공신경망 기계학습이 적용된 고문헌 자동번역모델을 개발하고자 한다. 이 연구는 고천문 도메인에 특화된 인공지능 기계학습 기법으로 자동번역모델을 개발하여 이를 서비스하는 것을 목적으로 한다. 연구 방법은 크게 4가지 개발을 진행하는 것으로 나누어 볼 수 있다. 첫째, 인공지능의 학습 데이터에 해당되는 '코퍼스'를 구축하는 것이다. 이는 고문헌의 한자 원문과 한글 번역문이 쌍을 이루도록 만들어 줌으로써 학습에 최적화한 데이터를 최소 6만 개 이상 추출하는 것이다. 둘째, 추출된 학습 데이터 코퍼스를 다양한 인공지능 기계학습 기법에 적용하여 천문 분야 특수고전 도메인에 특화된 자동번역 모델을 생성하는 것이다. 셋째, 클라우드 기반에서 참여 기관별로 소장한 고문헌을 자동 번역 모델에 기반하여 도메인 특화된 모델로 도출 및 활용할 수 있는 대기관 서비스 플랫폼 구축이다. 넷째, 개발된 자동 번역기의 대국민 개방을 위해 웹과 모바일 메신저를 통해 자동 번역 서비스를 클라우드 기반으로 구축하는 것이다. 이 연구는 시스템 요구사항 분석과 정의를 바탕으로 설계가 진행 또는 일부 완료되어 구현 중에 있다. 추후 이 연구의 성능 평가는 자동번역모델 평가와 응용시스템 시험으로 나누어 진행된다. 자동번역모델은 평가용 테스트셋에 의한 자동 평가와 전문가에 의한 휴먼 평가에 따라 모델의 품질을 수치로 측정할 수 있다. 또한 응용시스템 시험은 소프트웨어 방법론의 개발 단계별 테스트를 적용한다. 이 연구를 통해 고천문 분야가 인공지능 자동번역 확산 플랫폼 시범의 첫 케이스라는 점에서 의의가 있다. 즉, 클라우드 기반으로 시스템을 구축함으로써 상대적으로 적은 초기 비용을 투자하여 활용성이 높은 한문 문장 자동 번역기라는 연구 인프라를 확보하는 첫 적용 학문 분야이다. 향후 이를 활용한 고천문 분야 학술 활동이 더욱 활발해질 것을 기대해 볼 수 있다.