• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.21-27
• /
• 2023

Modern naval ships install an Infra-Red Signature Suppression system (IRSS) in their exhaust pipe to reduce infrared signature emitted to the outside. In addition, naval ships are strategic assets with a very long life cycle, so high reliability of the performance of the equipment on board must be guaranteed. Therefore, equipment such as IRSS is evaluated for performance through model testing at the design stage. A variety of measuring instruments are used in IRSS model testing, and the reliability of these instruments must also be guaranteed. In this paper, a study was conducted to evaluate the reliability of measurement equipment used in IRSS model testing. The test equipment and instruments used were a hot gas wind tunnel, pitot tube, digital differential pressure gauge, thermocouple sensor, and digital recorder. As the fan speed of the hot gas wind tunnel increased, the measurement deviation of the flow decreased, and the temperature output of the thermocouple sensor showed differences in response time and stability depending on the method used.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.900-909
• /
• 2007

This paper describes an experiment on the evaluation of human sensibility by monitoring responses to changes In the frequency and amplitude of a tactile display system. Preliminary tasks were performed to obtain effective adjectives concerning texture perception. The number of collected adjectives was originally 33. This number of adjectives was reduced to 14 by a suitability survey that asked whether an adjective is suitable for expressing a texture feeling. Finally after performing a semantic similarity evaluation, the number of adjectives was further reduced to ten and these ten were used in the main experiment. In the main experiment, selected sandpaper types and 15 selected combinations of frequencies and amplitudes of a tactile display were utilized to quantitatively evaluate the ten adjectives using a bipolar seven-point scale. The data show that a relationship exists between the independent variables(frequency, amplitude, and grit site) and the dependent variable(perceived texture). That is, the change of frequency and amplitude is directly related to perceived roughness or essential elements of human tactile sensitivity found in the preliminary experiment.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.3
• /
• pp.119-126
• /
• 2017

In the clinical setting, the pressure bio-feedback device is used for the spinal rehabilitation of patients with back pain, but it has several disadvantages. The purpose of this study was to develop a digitalized pressure biofeedback system that provides precise exercise method and posture in real time during the spinal rehabilitation exercise by sensing and monitoring body movements and balance of users and providing biofeedback to users. After that, the usability testing for a digitalized pressure biofeedback system will be conducted to identify problems such as safety, performance, operability, and satisfaction, and suggest improvement directions. A total of 33 subjects were participated in the usability testing. The experts group and the users group evaluated the developed digitalized pressure biofeedback system on a scale of 5 points after using the equipment. In the user group, safety was 3.59, operability was 4.38, satisfaction was 4.49. In the expert group, safety was 2.86, operability was 3.91, and performance was 4.28. Based on the usability evaluation, if the problems of stability of the cradle for tablet PC, air injection, screen display, etc. are solved, it becomes a exercise device capable of accurately exercising and evaluating the function of the spine by checking its own motion state while the spinal stabilization exercise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.26-37
• /
• 2019

Recently, standardization of installation progress and technology of site acceptance test(SAT) for energy storage system(ESS) are being required due to performance of ESS depending on working condition and environment even though the quality and safety of each component of ESS　is guaranteed. And also, it has been required to perform not only performance testing by H/W equipments but also performance verification by S/W tool, in order to more accurately and reliably validate the performance of the ESS in advanced countries. Therefore, this paper proposes evaluation algorithm for SAT to evaluate performance of ESS and presents modeling of SAT test equipment for ESS by using PSCAD/EMTDC. Furthermore, 30[kW] scaled portable test equipments is implemented based on the proposed algorithm and modeling. From the various simulation and test results, it is confirmed that performance of ESS related to characteristics of capacity and Round-trip efficiency, Duty-cycle efficiency, low voltage ride through(LVRT) and Anti-islanding can be accurately evaluated and that the simulation results of PSCAD/EMTDC are identical to test results of 30[kW] test equipment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.145-152
• /
• 2015

In the study, the effects of damping devices on damping ratio increase and wind-load reduction were investigated based on the computational platform, which is one of the parametric modeling methods. The computational platform helps the designers or engineers to evaluate the efficacy of the numerous alternative structural systems for irregular Super-Tall building, which is crucial in determining the capacity and the number of the supplemental damping devices for adding the required damping ratios to the building. The inherent damping ratio was estimated based on the related domestic and foreign researches conducted by using real wind-load records. Two types of damping devices were considered: One is inter-story installation type passive control devices and the other is mass type active control devices. The supplemental damping ratio due to the damping devices was calculated by means of equivalent static analysis using an equation suggested by FEMA. The optimal design of the damping devices was conducted by using the computational platform. The structural element quantity reduction effect resulting from the installation of the damping devices could be simply assessed by proposing a wind-load reduction factor, and the effectiveness of the proposed method was verified by a numerical example of a 455m high-rise building. The comparison between roof displacement and the story shear forces by the nonlinear time history analysis and the proposed method indicated that the proposed method could simply but approximately estimate the effects of the supplemental damping devices on the roof displacement and the member force reduction.

• Journal of the KSME
• /
• v.32 no.4
• /
• pp.371-378
• /
• 1992

발전용 터빈 부품중 회전체인 로터의 수명평가를 간단히 소개하고 수명평가시 고려되는 주요 재질특성에 대하여는 간단한 설명과 데이터를 이용하는 방법을 기술했다. 정확한 수명평가를 위해서는 금속학적인 고찰을 병행하여 경년열화와 효과를 고려하고, 실제 가동 조건과 동일시할 수 있는 각종 데이터를 적용해야 하나 본문에서와 같이 실험에 따르는 제약이 많아 추정 또는 가공된 데이터를 이용한다. 신뢰성 높은 수명평가를 위해선 각종 데이터 확보를 위한 실험장치의 개선과 실험방법의 개발이 매우 중요하다고 본다. 또한 현존하는 재료제조 기술상 초기부터 일 정한 허용결함을 인정하면서 설계, 제조, 가동되고 있는 각종 설비에 경제성을 극대화시키면서 동시에 안전을 확보하는 것은 매우 어렵지만 피할 수 없는 당면과제라 생각한다.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.149-159
• /
• 2002

The performance of two single-barrier three-phase control systems at diamond interchanges was evaluated for various traffic conditions. To emulate the actuated signal control, hardware-in-the-loop system combined with CORSIM simulation program was used. Two performance measures, average delay and total stops, were used for the evaluation process. Results showed that the two three-phase systems gave similar performance in terms of average delay, but not stops. The delay performance of each phasing system was generally dependent on the traffic pattern and ramp spacing. However, there was a distinct movement preference for each phasing system. The total stops decreased as the spacing increased, and it was the most sensitive variable that can differentiate between the two three-phase systems. It was also shown that the hardware-in-the-loop control could be a good method to overcome the limitations of current simulation technology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.34-41
• /
• 2009

Recently, information-Ievel of the people has been increased with growing IT cutting-edge technology. There is a trend to combine these achievements with information-technology, ubiquitous technology, and mobile technology in the field of transportation. Along with this trend, a PDA-based traffic accident investigation device was developed. This paper established the evaluation method of feasibility test on the PDA device, and performed qualitative and quantitative evaluation as compared with the current practice (manual investigation). Test results showed that traffic accident investigation using the PDA device was faster and more convenient than manual investigation. It is expected that the reliability of accident investigation will be improved by applying this tool with minor modifications.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.215-221
• /
• 2022

본 연구는 민간항공 조종사 훈련 및 평가에 중요하게 고려되고 있는 8가지 핵심 역량 향상을 위한 기초자료 마련을 위해 수행되었으며, 그 중 가장 중요하다고 판단되는 상황인식(situation awareness) 및 작업부하 관리에 대해 분석하였다. 예비 조종사를 대상으로 항공기 접근 및 착륙 단계를 진행하는 동안 PM(pilot monitoring) 역할을 수행하며 인식하는 항공기 상황과 작업부하량에 대해 평가하였다. 평가 시나리오는 기본비행훈련장치(basic aviation training device)를 사용하여 지형적 상황인식, 공간/시간적 상황인식, 시스템 상황인식, 환경적 상황인식을 평가할 수 있는 요소로 구성하였으며, 모니터링 도중 의도적인 주의분산 상황을 추가하였다. 연구 결과, 전체 비행 단계에 대한 상황인식은 32.3%이고, 지형적 상황인식(60.3%)이 가장 높고, 시스템 상황인식(18%)이 가장 낮은 것으로 나타났다. NASA-TLX 평가방법으로 측정한 작업부하량은 10.8점(20점 만점)으로 나타났다. 또한, 기초공중항법학을 수강한 예비 조종사들이 대체로 높은 상황인식을 하였고, 작업부하 결과는 지형적 상황인식과 밀접한 상관관계를 가지고 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.284-294
• /
• 2018

Statistical methods have been widely used to estimate the remaining battery runtime of mobile smart devices, such as smart phones, smart gears, tablets, and etc. However, existing work available in the literature only considers a particular statistical method. Thus, it is difficult to determine whether statistical methods are applicable to estimating thr remaining battery runtime of mobile devices or not. In this paper, we evaluated the performance of statistical methods applicable to estimating the remaining battery runtime of mobile smart devices. The statistical estimation methods evaluated in this paper are as follows: simple and moving average, linear regression, multivariate adaptive regression splines, auto regressive, polynomial curve fitting, and double and triple exponential smoothing methods. Research results presented in this paper give valuable data of insight to IT engineers who are willing to deploy statistical methods on estimating the remaining battery runtime of mobile smart devices.