• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.400-406
• /
• 2006

Hydrogen analysis by elastic recoil detection has been performed utilizing polyimide film as a reference sample of known hydrogen content assuming the soundness of ion beam current integration. However beam current integration at higher incidence angle is not reliable. Scattering yield per unit fluence by current integration which is normalized per unit path length decreases as the sample tilt angle is getting higher. Moreover because beam current integration at high tilt angle is incomplete, hydrogen evaluation is very risky by direct comparison of sequentially collected recoil spectra between reference and target sample. In this study, primary ion beam dose is determined by backscattering spectrum that is collected simultaneously with recoil spectrum instead of ion beam current integration in order to reduce uncertainty arising in the process of current integration and to enhance the reliability of quantitative analysis. Three test samples are selected $-7.6{\mu}m$ polyimide film, hydrogen implanted silicondioxide and Au deposited carbon wafer- and analyzed by two methods and compared.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.5-16
• /
• 2015

Considering the conversion of the Korea Construction Standards to Limit State Design (LSD), we analyzed the resistance bias factor for pullout resistance, as a part of the development of the Load and Resistance Factor Design (LRFD) for soil nailing; very few studies have been conducted on soil nailing. In order to reflect the local characteristics of soil nailing, such as the design and construction level, we collected statistics on pullout tests conducted on slopes and excavation construction sites around the country. In this study a database was built based on the geotechnical properties, soil nailing specifications, and pullout test results. The resistance bias factors are calculated to determine the resistance factor of the pullout resistance for gravity and pressurized grouting method, which are the most commonly used methods in Korea; moreover, we have relatively sufficient data on these methods. We found the resistance bias factors to be 1.144 and 1.325, which are relatively conservative values for predicting the actual ultimate pullout resistance. It showed that our designs are safer than those found in a research case in the United States (NCHRP Report); however, there was an uncertainty, $COV_R$, of 0.27-0.43 in the pullout resistance, which is relatively high. In addition, the pressurized grouting method has a greater margin of safety than the gravity grouting method, and the actual ultimate pullout resistance determined using the pressurized grouting method has low uncertainty.

• Korean Journal of Forensic Psychology
• /
• v.12 no.1
• /
• pp.35-51
• /
• 2021

People's belief in free will is important in determining the causes and responsibilities of human behavior. Over the past decades, there has been debate about belief in free will in the fields of neuroscience, philosophy, ethics, and criminal law. The Free Will and Determinism Scale (FAD-Plus; Paulhus & Carey, 2011) is a test tool that measures the components related to the belief in an individual's free will. This study conducted a confirmatory factor analysis of 1,000 ordinary people of various age groups and socio-economic backgrounds based on previous studies that conducted an exploratory factor analysis (Study 1). The author has secured the reliability and validity of a number of measures. Furthermore, it was examined how the sub-item of the FAD-Plus scale, 'belief in free will,' was related to correspondence bias and locus of control (Study 2). As a result of analyzing a total of 83 subjects, high belief in free will had a positive correlation with punishment judgment for negative behavior and internal attribution, but there was no significant relationship in reward judgment for positive behavior. Based on the study results, it was proven that the FAD-Plus is valid for the general public as well, and the relationship between belief in free will, attribution bias, locus of control and behavior judgment was examined. The limitations of this study, policy implications, and research directions are discussed.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.137-144
• /
• 2022

Objectives : This study was designed to investigate the effect of sleep quality on depression symptoms and the mediating effect of interpretation bias and anxiety symptoms in psychiatric patients. Methods : Data accumulated for outpatients and inpatients in the Department of Mental Health Medicine at Hanyang University Guri Hospital were used. The measurement tools were Pittsburgh Sleep Quality Index (PSQI), Ambiguous/Unambiguous Situations Diary-Extended Version (AUSD-EX), Beck Anxiety Inventory (BAI), Beck Depression Inventory-II (BDI-II). Correlation analysis and bootstrapping analysis were conducted using SPSS 25.0 and SPSS Macro based on 162 patient data. Results : As a result of the study, the double mediating effect of interpretation bias for Ambiguity and anxiety symptoms was significant in the relationship between sleep quality and depression symptoms. Conclusions : In this study, it was confirmed that low sleep quality sequentially affects anxiety and depression symptoms through interpretation bias for ambiguity. Based on this, it is expected that the development of other psychiatric symptoms can be prevented by preferentially performing therapeutic intervention on preceding symptoms.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.6
• /
• pp.5-11
• /
• 2015

Recently the necessity of developing the Load and Resistance Factor Design (LRFD) for shallow foundation has been raised to implement to the domestic design codes related to geotechnical engineering since the limit state design is requested as international technical standard for the foundation of structures. In this study, applicability of LRFD for shallow foundation on weathered soils was investigated and resistance factor for this case was proposed. The quantitative analyses on the uncertainty and resistance bias for shallow foundation on weathered soil ground were performed by collecting the statistical data about domestic case studies for design and construction of shallow foundation. Reliability analyses for shallow foundation were first performed using FDA (First-order Design value Approach) method. Resistance factors were calibrated using the load factors obtained from the specifications of shallow foundations on weathered soil ground. The influence of the load factors developed in this study on the resistance factors were discussed by comparing with the resistance factor obtained from using AASHTO load factors.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.80-87
• /
• 1996

국내 가동중원전의 노물리 시험중 제어봉제어능 측정시 적용되는 측정방법들에 대해 실제 측정결과를 이용해서 통계적 분석 및 추론을 수행하였다. 1988년부터 현재까지 약 8년간 모든 발전소에서 행한 측정결과에 대해 통계적 분석 및 주요 시험변수들과의 상관관계를 분석한 결과, 다음과 같은 결론이 도출되었다. 제어봉 제어능 측정결과는 전반적으로 측정치가 예측치에 비해 작은 경향을 보이고 있다. 붕산희석법은 측정오차가 가장 작았고 임의성을 가지며, 노심의 붕산농도와 상관관계가 있다. Framatome방식의 제어봉교환법은 비교적 측정오차가 크나, 시험변수들과의 상관 관계는 가장 미약하다. CE 방식의 제어봉교환법은 Swap 방법 중에는 측정오차가 가장 작고 임의성이 있으나, 붕산농도 및 기준제어군 제어능 측정오차의 크기와 강한 상관관계를 갖는다. Westinghouse 방식의 제어봉교환법은 가장 측정오차가 크며 대부분의 측정결과에서 측정치가 작게 편향되어 있다. 그리고 시험제어군의 제어능이 작을수록 측정오차가 커지는 강한 상관관계가 있으며, 기준제어군 제어능 측정오차의 크기와도 상관관계가 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.361-373
• /
• 2002

In this paper, we propose a channel normalization method to improve the performance of CMS (cepstral mean subtraction) which is widely adopted to normalize a channel variation for speech and speaker recognition. CMS which estimates the channel effects by averaging long-term cepstrum has a weak point that the estimated channel is biased by the formants of voiced speech which include a useful speech information. The proposed Formant-broadened Cepstral Mean Subtraction (FBCMS) is based on the facts that the formants can be found easily in log spectrum which is transformed from the cepstrum by fourier transform and the formants correspond to the dominant poles of all-pole model which is usually modeled vocal tract. The FBCMS evaluates only poles to be broadened from the log spectrum without polynomial factorization and makes a formant-broadened cepstrum by broadening the bandwidths of formant poles. We can estimate the channel cepstrum effectively by averaging formant-broadened cepstral coefficients. We performed the experiments to compare FBCMS with CMS, PFCMS using 4 simulated telephone channels. In the experiment of channel estimation, we evaluated the distance cepstrum of real channel from the cepstrum of estimated channel and found that we were able to get the mean cepstrum closer to the channel cepstrum due to an softening the bias of mean cepstrum to speech. In the experiment of text-independent speaker identification, we showed the result that the proposed method was superior than the conventional CMS and comparable to the pole-filtered CMS. Consequently, we showed the proposed method was efficiently able to normalize the channel variation based on the conventional CMS.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.295-302
• /
• 2007

This paper presents a rigorous comparison of the design characteristics of polarization-insensitive directional coupler (DC) and multimode interference (MMI) coupler based on rib type waveguides, by using longitudinal modal transmission-line theory (L-MTLT). It shows that the multimode mixing and interference property of MMI can be structurally designed through the continuous evolution of the two-mode coupling property of DC. It also compares and analyzes the coupling efficiency along with the coupling length and the wavelength between polarization-insensitive DC and MMI. From the design properties obtained, it demonstrates for the first time the integration of polarization-insensitive DC or MMI with a Bragg grating and evaluates precisely the filtering characteristics. The numerical results reveal that the DC, as long as it is designed to have the same coupling length for TE and TM modes, has better performance than the MMI in polarization-insensitive filtering behaviour. However, it shows that the MMI with much less coupling length than DC is preferred in the miniaturization of integrated devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.125-134
• /
• 2021

With the rapid development of the film industry, the number of films is significantly increasing and movie recommendation system can help user to predict the preferences of users based on their past behavior or feedback. This paper proposes a movie recommendation system based on the latent factor model with the adjustment of mean and bias in rating. Singular value decomposition is used to decompose the rating matrix and stochastic gradient descent is used to optimize the parameters for least-square loss function. And root mean square error is used to evaluate the performance of the proposed system. We implement the proposed system with Surprise package. The simulation results shows that root mean square error is 0.671 and the proposed system has good performance compared to other papers.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.222-227
• /
• 1998

본 논문에서는 이진난수발생기들의 안전성 평가를 위한 새로운 통계적 검정을 소개한다. 검정에서 구현된 기본개념은 이진난수열이 랜덤하지 않다면 다음 발생 비트를 예측할 확률이 편향된다는 다음 비트 검정이론에 바탕을 둔다. 본 검정은 이진난수열이 아닌 임의의 d진 난수열의 안전성 검정에도 유용하게 적용될 수 있으므로 난수발생기를 이용하여 설계된 스트림 암호 시스템의 안전성 평가에 평가 측도로서 사용될 수 있다. 또한 컴퓨터 시뮬레이션을 통해 몇몇 난수발생기에 검정을 적용함으로써 검정법이 타당함을 보인다.