• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.369-373
• /
• 2000

This paper describes a design for microstrip EMC cross dipole array antenna with circular polarization. To realize the wide bandwidth and circular polarization, the electromagnetic-coupled cross dipole is used. To obtain the uniform aperture illumination, offset technique for array is adopted. In 20-element array design, the calculated axial ratio and gain are about 0.1 dB and 9.9 dBi at 12GHz, respectively. The frequency characteristics of a fabricated 20-element array antenna are measured. The calculated results agree well with the measured ones.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.30-35
• /
• 1995

Periodically slotted dielectrically filled paralled-plate waveguide as a leaky wave antenna is analysed for E-polarization case. The homogeneous linear equation whose unknown is the surface current density over the conducting strip is formulated, from which the complex propagation constant is calculated and compared with the previous results. Good correspondence between them is observed. And a method for the radiation pattern is also considered.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.191-192
• /
• 2006

An orthogonal antenna is presented for reader applications of radio frequency identification (RFID) at 433 MHz. The antenna is composed of two $1{\times}2$ sub-arrays orthogonally placed on a ground plane. Two different feeding networks are introduced to control horizontal and vertical radiation current flows for each sub-array, respectively. An inverted-F structure is used as a radiation element with vertical and horizontal currents flowing on the radiator, thereby obtaining two linear polarizations. Antenna gains are 3.71 and 3.43 dBi and isolation between the two input ports is less than 25dB.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.327-330
• /
• 2003

A novel compact circular polarization operation of the microstrip antenna with four-slits and T-slits is proposed. The mechanism for compact size antenna is investigated with the behavior of the currents on the radiating patch. The equivalent surface current path due to the slits is lengthened, reducing the resonant frequency at a fixed patch size. The proposed compact CP design can have an antenna size reduction of about 33 ∼ 45％ as compared to the conventional microstrip antenna. Details of the experimental and measured results are presented and analysed.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.294-297
• /
• 2003

In this paper we designed and measured HTS antenna array for Direct Broadcast Satellite (DBS) system. HTS antennas fabricated in this work were a four-element, 11.67 ㎓z, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcas- ting satellite (DBS) system. Our antennas was designed and built on a 0.5 mm thick YBa2Cu3O7-x (YBCO) /MgO substrate. The measurement results showed good axial ratio, wide bandwidth a remarkable improvement over their metal counterpart.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.88-94
• /
• 2004

The electrical design of the Ka-band antenna for the domestic Communications and Broadcasting Satellite (CBS) is described. The antenna has the offset Gregorian structure and is installed on the Earth-facing panel of the satellite. The electrical performance specifications for the antenna were determined from the required EIRP and G/T through the payload level performance analysis. This paper utilized the reflector shaping technology for the trade-off among the major performance parameters, resulting in compliance of all the parameters. The designed antenna shows 37.95 dBi EOC (End of Coverage) gain and 28.7 dB sidelobe isolation for transmit band, and 37.49 dBi EOC gain and 31.1 dB sidelobe isolation for receive band, The electrical performances of the antenna have been verified via the electrical testing of a manufactured EQM (Engineering Qualification Model) antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2011

This paper presents a design of spiral antenna with broad bandwidth for non-linear junction detector(NLJD). An elliptical patch as radiating element located on center position of radiating surface, as well as the spiral elements on radiating surface was designed for broad bandwidth of spiral antenna. An antenna ground structure generating the multi resonance by spiral slit inserted on ground surface was also proposed. In order to realize high directivity and high gain of the proposed antenna, the cavity wall made of Fr4-epoxy and the metal cap were considered in design. As a result, the calculated gain of antenna with metal cap was improved about 3 dB with comparison of antenna without metal cap and the measured main beam directivity toward -z axis direction agreed well with calculation result. The measured axial ratio satisfied the circular polarization within -z axis ${\pm}45^{\circ}$ at design frequency bands and showed reasonable agreement with prediction.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.10-20
• /
• 2014

지금까지 대부분의 인공위성 또는 항공기 SAR 시스템은 하나의 위상 배열 안테나를 이용하며, 단 영상을 생성하고 판독하는데 주로 사용되었지만, 차세대 SAR 시스템은 다중 편파 관측이 가능하거나 이중 채널 또는 위상 배열 안테나의 분리 모드(split-antenna mode)를 통해 간섭기법의 적용이 가능한 시스템으로 발전이 이루어지고 있다. 이러한 측면에서 이 논문은 차세대 SAR 인공위성의 새로운 분석 기법 연구와 활용 증진을 위해, 유사한 기능을 보일 수 있는 이중 채널 항공기 SAR 시스템을 구축하고, 이로부터 단일 패스 간섭기법(single-pass interferometry)을 연구한 논문이다. 공간적으로 서로 다른 위치에 있는 두 개의 SAR 채널에서 동시에 수신된 레이다 신호를 간섭적으로 처리하여, 지형의 고도 정보를 추출하거나 이동하는 물체의 속도를 탐지할 수 있도록 알고리즘을 구현하였고, 새로운 활용 분야를 모색하고자 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.357-363
• /
• 2000

The received field strength is varied with the electrical characteristics of the reflection medium in the case of the line-of-sight. To obtain the electrical characteristics of medium, the relationship between reflection coefficients and complex dielectric constants of the medium is derived, and a equation of circle which is related to reflection coefficient and ratio of transmitted power to received one is represented. A algorithm is proposed, which is to predict the electrical characteristics of the medium by using the received field strength.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.202-206
• /
• 2009

본 논문에서는 X-band GB-SAR 시스템을 이용하여 지상을 모니터링 하였으며, 대기 중의 습도와 거리의 영향을 받는 대기보정 상수를 산출하였다. 시스템에서 X-band 안테나는 중심주파수 9.65 GHz, 밴드 폭 600 MHz이며, 신호의 증폭과 다편파 측정 및 분석을 위해 각각 마이크로파 앰프와 마이크로파 스위치를 이용하였다. Azimuth step과 length는 5 cm와 5 m로 최대 관측 거리는 약 200 m 이다. phase 분석에 쓰인 산란체는 총 5개의 trihedral corner reflector로서, 시스템으로부터의 거리를 각각 다르게 설정하였다. 실험은 3일간 연속적으로 수행되었으며, 실험간 상대습도는 최소 50 %에서 최대 90 %까지로 약 40 %의 변화를 보였다. 고정된 상태의 reflector는 마치 이동한 것과 같은 현상을 보였는데 이는 마이크로화의 전파과정에서 발생하는 거리와 습도에 따른 지연효과라고 판단하였으며, 이를 배제하기 위하여 대기보정식을 산출하였다. 산출과정에서 temporal coherence가 0.98 이하인 reflector의 신호는 제외하였는데 이 경우 시스템 및 reflector의 안정성에 문제가 있다고 판단하였기 때문이다. 산출된 대기보정식은 C-band 안테나를 사용한 실험과 비교하여 보았다.