• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2427-2433
• /
• 2015

A high-gain circularly-polarized patch antenna with a double-layered superstrate is proposed operating at a wireless LAN frequency. A superstrate has an array of metallic periodic unit cells and is located above the patch antenna with an air-gap. The designed antenna has a high gain of over 9.59dBi, which is the gain enhancement of 6.48dB compared to the patch antenna without superstrate. And it has a low axial ratio of under 3dB, so that it maintains the circular polarization of the patch antenna. The optimum air-gap height at the superstrate of $4{\times}4$ arrays is 25mm, which is equivalent to about $0.2{\lambda}$ at the frequency of 2.45GHz. We confirmed that the double-layered stacking of a superstrate increases the effective aperture size and hence it leads to enhance a gain of the patch antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.135-141
• /
• 2008

In this paper, a design method of broadband horn antenna having 3:1 bandwidth and multiple polarization characteristics is proposed. The feeding section of the antenna adopts quadruple-ridged waveguide type for broadband and multiple polarization characteristics of the antenna. By inserting a shorting bar in the cavity structure with a semi-sphere type back short, the return loss at the feeding section was minimized. A corrugated dielectric lens is designed for phase compensation and lens-surface matching at the antenna aperture, which improves the antenna beam pattern. The validity of the design method is verified by indicating the measured data of the antenna.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.101-110
• /
• 2007

This study has designed a circular polarization antenna for UHF bandwidth RFID reader. As a result of performance test of the antenna designed it is found that return loss (S11) is about -45.529dB at 914MHz, which is relatively small, and antenna gain is about 6.09dBi. It has also been confirmed that $50{\Omega}$ impedance matching is about $50.48{$\Omega}$ and it can be applied to every RFID reader. Therefore, the antenna is designed to have higher gain of circular polarization by improving reception, which is one of the most important parameters of RFID reader and is expected to be extensively used to recognize multi-tag in the distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.573-581
• /
• 1994

A microstrip antenna having a dual polarization and a smaller size than feed horn polarizer of F.R.R.S(Faraday Rotation Rotary Switch) is designed, in which GaAs MESFET switches are inserted for selective reception of RHCP or LHCP. For an accurate analysis of the resonance frequency, input impedance and radiation pattern of the circularly polarized microstrip antenna, finite difference time domain (FDTD) method is used. When the GaAs MESFET switch in the feeder is ON-stats, the truncated patch antenna has a gain of about 16.6dB including amplifier gain, while the switch is OFF-state, this has a isolation level of -24dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1299-1305
• /
• 2002

Tx/Rx dual microstrip array antennas for satellite communications are designed, fabricated, and measured in this paper. They have a Right Handed Circular Polarization (RHCP) for Tx and Left Handed Circular Polarization (LHCP) for Rx. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 2${\times}$1 sequential rotation mays are applied. From the measured results, 8${\times}$1 microstrip may antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to satellite communication antennas, active phased may antennas, and radiators in other antennas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.131-137
• /
• 2023

In this paper, a phase comparison direction finding method of circular array composed of 8 antennas considering polarization characteristics is analyzed. A broadband cavity-backed patch antenna operating in 6 ~ 12 GHz is used, and the antennas are arranged in radial direction to receive various polarization signals. For the phase comparison, widely spaced elements are used to obtain precise DOA(Direction of Arrival), and narrowly spaced elements are used to resolve ambiguity. Two dimensional direction finding is performed for ±20° in both azimuth and elevation, and the DOA error is less than 0.5° and 1.6° near the boresight and the ±15° region, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.119-123
• /
• 2000

This paper described a design for microstrip antenna with EMC cross dipole for circular polarization. To realize the wide bandwidth and circular polarization, the elertromagnetic-coupled cross dipole are used. The calculated axial ratio is about 0.1 dB in the main bean direction at 12 GHz and the circular polarization is realized.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.330-337
• /
• 1998

In this paper, we fabricated a pair of circulaly polarized conical horn antennas for evaluating the scattering characteristics of a hemispherical reflector and of propagation characteristics in in-building environments, which is required for constructing a new wireless in-building communication system of microwave band consisted of a hemispherical reflector installed on the ceiling. The measurements show the fairly good features such that cross-polarization discremination more than 27 dB and axial-ratio less than 1.25 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.397-401
• /
• 2005

In this paper, a slot-coupled microstrip antenna with switchable polarization is proposed for the polarization diversity applications in the complicated communication environment. The proposed antenna is fed by a microstrip line through one of two slots located with the interval of $\lambda{g}/4$ in the ground plane. By switching the PIN diode between opened and shorted termination which is located at the tip of the microstrip line, the switching function between horizontal and vertical polarization was confirmed experimentally. The measured resonant frequencies of the fabricated antenna are $2.41\;\cal{GHz}\;2.40\;\cal{GHz}$ and the cross polarization levels are $19\;\cal{dB},\;23\;\cal{dB},\;the\;-10\;\cal{dB}$ return loss bandwidths are $95\;\cal{MHz}\;100\;\cal{MHz}$ in horizontal and vertical polarization, respectively, and the antenna gain is almost $6\;\cal{dBi}$.