• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.301-309
• /
• 2008

In this study, the effect of formaldehyde to phenol (F/P) molar ratios, catalyst wt%, and reaction temperature on the chemical structure was studied utilizing a two-level full factorial experimental design. The effect of three variables on the chemical structure was analyzed by using three-way ANOVA of SPSS. Concentration of methyrol-substituted phenols after 300 min addition reaction increased with higher the F/P mole ratio, lower the reaction temperature and lower the catalyst wt%. Resol catalysed by barium hydroxide showed higher addition of formaldehyde onto ortho positions of phenolic rings. A simplified elementary reaction model for resole type phenolic resin formation which do not consider the dissociation of phenolic compounds and the fraction of formaldehyde in the form of methylene glycol was proposed and compared with Zavitsas' type models. Elementary reaction model showed error of 2.79% compared to the error of 3.27% in Zavitsas' type models. It was thought that the elementary reaction model could be used to predict the behavior of addition reaction in resol formation.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.360-370
• /
• 2021

For the purpose of finding new uses for Miscanthus sinensis var. purpurascens, this study first constructed boards with the particles of the plant and impregnated them with phenolic resin at resin impregnation rates of 30 ± 2%, 40 ± 2%, 50 ± 2%, and 60 ± 2%. The impregnated boards were then carbonized at the carbonization temperature of 800℃, after which their density and mechanical properties were examined according to the different resin impregnation rates. The results showed that density, flexural strength performance, Brinell hardness, and compressive strength increased as the resin impregnation rate increased, thus affecting the physical and mechanical properties of the ceramics made of M. sinensis var. purpurascens particles.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.50-61
• /
• 1988

접착제(接着劑) 제조(製造)를 위하여 펄프폐액(廢液)중의 리그닌을 이용(利用)하는 연구(硏究)가 1930년경(年傾)부터 진행(進行)되여 아황산펄프폐액(廢液)중의 Lignosulfonate의 경우는 페놀수지(樹脂)나 요소수지(要素樹脂)에 증량(增量)시키거난 반응(反應)시키는 연구(硏究)인데 비하여 kraft 리그닌을 이용(利用)하는 경우는 페놀수지(樹脂)의 보문(報文)이 주류(主流)를 이루고 있으나 요소계(要素系) 공축합수지(共縮合樹脂)는 아직 발표(發表)된 바 없으며 또한 아직까지 리그닌을 이용(利用)한 상업적(商業的)인 접착제(接着劑)가 제조(製造)되어 활용(活用)되지 못하고 있는 실정(實情)이다. 따라서 본(本) 연구(硏究)는 합판제조(合板製造)의 원가절감(原價節減), 폐액이용(廢液利用)의 환경보존관점(環境保存觀點)에서 Krfat Pulp 폐액(廢液)중의 리그닌접착제(接着劑)의 제조(製造)하고져 실시(實施)하였으며, Urea-Lignin 접착제(接着劑)의 도포량(塗布量)은 일반적(一般的)으로 합판(合板)에 도포(塗布)되는 요소수지(要素樹脂)의 량(量)(320g/$m^2$)과 동일(同一)하고 압축응력(壓縮應力)은 균일(均一)하게 12kg/$cm^2$으로 하여 열압조건(熱壓條件)(온도(溫度), 시간(時間))의 영향(影響))을 아울러 규명(糾明)하였다. Urea-Formaldehyde와 Kraft lignin의 혼합비(混合比)는 중량비(重量比)(N.V.C)로 7:3으로 합성수지(合成樹脂)를 만들어 합판제조(合板製造)를 통(通)하여 구명(究明)를 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 본(本) 실험(實驗)의 결과(結果) 요소수지(要素樹脂)의 약(約) 30%가 krfat lignin으로 대체(代替)할 수 있음을 보여준 바, Pulping 공정(工程)의 부산물(副産物)로 얻어진 폐액(廢液)은 합판제조시(合板製造時) 접착제(接着劑)의 대체원(代替源)으로 유효(有效)하다. 2. 경제적관점(經濟的觀點)에서 합판제조(合板製造)를 위한 최적열압조건(最適熱壓條件)은 $160^{\circ}C$에서 3분(分)으로 압착(壓搾)하는 것이 적절(適切)하였다.(상태(常態)): 16.49kg/$cm^2$, 내수(耐水) : 18.56kg/$cm^2$, 내온수(內溫水) : 12.53kg/$cm^2$). 3. 요소-리그닌 접착제(接着劑)로 제조(製造)된 합판(合板)의 전단인장강도(剪斷引長强度)는 양호(良好)한 접착력(接着力)을 나타냈으며, 내수접착력(耐水接着力)($30^{\circ}C$에서 3시간(時間) 심적후(沈積後) 시험(試驗)은 상태접착력(狀態接着力)과 별차이가 없거나 더 높은 인장강도력(引長强度力)을 보여준 바, 내수합판용(耐水合板用) 접착제(接着劑)로 상당한 전망(展望)을 나타냈다.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.16-24
• /
• 2001

The curing behavior of a phenolic resin (F/p: 1.3, 1.9, 2.5 for resol resin, F/P: 0.5, 0.7, 0.9 for novolac resin) has been studied by FT-IR spectroscopy. In this study is to synthesis of resol and novolac type phenolic resin with different F/P molar ratios and to compare the level of cure at different curing temperature conditions ($130^{\circ}C$, $160^{\circ}C$, $180^{\circ}C$ for resol resin, $160^{\circ}C$, $170^{\circ}C$, $180^{\circ}C$ for novolac resin) for 3, 5, 7, 10, 20, and 60 (min.), respectively. The conversion (${\alpha}$) was determined by the ratio of the peak area with time to the peak area of non-baked phenolic QH ($3300cm^{-1}$) at spectra. It is concluded that the initial curing rate of resol and novolac resin was increased as the molar ratio of formaldehyde/phenol increased and as the curing temperature of resin increased. According to the analysis was by the homogenous first-order model, the initial curing rate of resol and novolac resin was increased as the molar ratio of formaIdehyde/phenol increased at specific curing temperature.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.139-147
• /
• 1997

펄프폐수 내에 존재하는 대표적인 수지 구성성분의 일종인 wood resin 화합물이 메탄생성균에 미치는 독성을 평가하기 위한 회분식 독성실험을 수행하였다. 수지는 극성용매로 추출가능한 몇몇 wood 구성성분의 혼합물로서 수지의 주요 구성성분은 긴 사슬 휘발성유기산, terpenes, resin acids, 리그난과 극성 페놀류들이다. 메탄생성균의 독성실험은 $30^{\circ}C$에서 표준회분식 실험방법을 채택하였고 식종물질로서는 입상슬러지를 사용하였다. 극성페놀의 한 종류인 4-hydroxystilbene가 가장 높은 독성을 나타내었으며, 50% 저해를 일으키는 농도는 $20mg/\ell$이었다. Resin acid와 휘발성 terpene 역시 메탄생성균에 독성을 나타내었으며, 50% 독성을 일으키는 농도는 $43{\;}~{\;}330mg/\ell$이었다. 반면에 triterpenes은 1,000 to $1,300{\;}mg/\ell$의 상대적으로 높은 농도에서도 메탄생성균에 독성을 일으키지 않았다. 따라서 wood resin의 구성성분이 몇몇 펄프폐수의 혐기성 처리에 있어서 독성을 일으키는 주요물질이었다.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.47-56
• /
• 2008

The aim of this study is to produce cokes which can be used for the production of ferroalloy, for this purpose, domestic anthracite mixed with plastic was sintered at various condition. The combustion and physical properties of anthracite and plastic, coal separation, and the influence of factors on the strength of coke were investigated. The results of this study are as follows: 1. The three kinds of anthracite from the Samcheok region contained 25 to 30% ash of $100{\mu}m$ over size, and have the caloric value of 5,205 cal/g(TaeAn), 4,893 cal/g(JangSung), 4,873cal/g(KyongDong). 2. The recommendable conditions for heavy-fluid separation of the Samcheok coal are to set the specific gravity of heavy fluid to 2.4 and control the size of coal to $35{\sim}140mesh$. 3. It is concluded that phenolic resin powder, liquefied phenolic resin, SAN, and melamine resin can be used as a binder for the anthracite cokes, from the thermal analysis of various plastics. Especially, the liquefied phenolic resin was considered as the most suitable binder as it would simplify the process.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.15-22
• /
• 2003

This study was carried out to investigate the properties of sawdust board impregnated with phenol resin according to the density and resin content of board. The sawdust board were manufactured to target densities of 0.4, 0.5, 0.6, 0.7 g/cm³ and resin content of 5, 10, 15, 20% made from Pinus densiflora S. et Z., Larix. kaemferi C. and Pinus koraiensis S. et Z. The impregnation process were executed in two ways, the application of vacuum pressure then followed by atmospheric pressure, and the application of vacuum pressure with ultrasonic vibration then followed by atmospheric pressure. The density of impregnated sawdust board increased as density and resin content of sawdust board increased, but impregnation rate decreased. The density, impregnation rate, bending strength and brinell hardness of sawdust board in impregnated vacuum pressure with ultrasonic vibration then nonpressure were higher than those of vacuum pressure then nonpressure. In this results, the impregnation rate is increased in vacuum pressure with ultrasonic vibration then nonpressure, it has affected the properties of sawdust board impregnated with phenol resin.

• Analytical Science and Technology
• /
• v.14 no.4
• /
• pp.349-355
• /
• 2001

A series of micro- and mesoporous activated carbons were prepared from phenolic resin using a metal treated chemical activation methodology. $N_2$-adsorption data were used to characterize the surface properties of the produced activated carbons. Results of the surface properties and pore distribution analysis showed that phenolic resin can be successfully converted to micro- and mesoporous activated carbons with specific surface areas higher than $962.3m^2/g$. Activated carbons with porous structure were produced by controlling the amount of metal chlorides($CdCl_2$, $CuCl_2$). Pore evolvement was shown to be most effected by the incremental addition of metal chloride. From the thermodynamic DSC data, enthalpy formations(${\Delta}H$) of first endothermic reaction were increase with the incremental addition of metal chloride.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.73-79
• /
• 2004

Research investigated the variation of density, weight loss and dimensional decreasing rate, heat conduction rate by the resin impregnation rate and burning temperature of woodceramics, which were formed by impregnation rate of 40~80% and burning temperature of 600~1500℃ with sawdust board impregnated with phenolic resin made from thinned logs of pinus densiflora, Larix kaemferi and pinus koraiensis. As the resin impregnation rate and the burning temperature increased, the density increased, however, as the burning temperature increased to at 1200℃ or more, the density decreased. The more the resin impregnation rate increased, the more the decreasing rate of weight and size decreased; the more the burning temperature increased, the more the decreasing rate of weight and size increased. When the resin impregnation rate was high, the heat conduction (mm/sec) was superior.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.577-585
• /
• 1996

Effects of various factors on the phenol degradation by activated sludge immobilized with the photo-crosslinked resin were investigated. The optimum pH on the degradation of phenol in both free and immobilized activated sludge was 7. When the pH of the reaction was varied from 5 to 10, the relative activity of the phenol degradation by the immobilized activated sludge was higher than that by the free activated sludge. A higher rate of phenol degradation was observed when a bead size was smaller. The phenol degradation in the free activated sludge was inhibited at the 3000 mg/L of phenol, while that in the immobilized activated sludge was maintained at the same concentration for 28 hrs without an inhibition. The degradation rates of phenol were not directly proportional to the increasing amount of immobilized beads dosage, but the phenol degradation was made in a rather short time than that for a free sludge system. The relative activities of the immobilized activated sludge after 7 runs of repeated reactions increased about 8 times as that of the first reaction. The activities for the phenol degradation remained stable for at least 80 days when the immobilized activated sludge was stored at an aerobic condition in the wastewater containing phenol. The loading rate as high as 5.59 kg-pheno1/㎥.d could have been achieved during the continuous treatment of phenol by the immobilized activated sludge.