• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.101-105
• /
• 2004

본 연구에서는 LF2407 DSP제어기를 사용한 혼합형 랜덤 펄스폭 변조기법(HRPWM : Hybrid Random PWM)을 제안하였다. 제안된 HRPWM은 PRBS (Pseudo-Random Binary Sequence)로 동작하는 시프트 레지스터의 lead-lag 랜덤 비트를 사용한다는 점에서 종전의 방법과 동일하다. 그러나 Lead-Lag 랜덤 비트와 논리적인 비교를 하기 위해 고정 주파수의 캐리어를 사용 하지 않고 랜덤 주파수의 삼각파 캐리어를 이용한다는 점이 종전의 방법과 다르다. LF2407 DSP에 의하여 랜덤 수 및 PRBS 그리고 3상 기준 정현파를 실시간으로 발생하며, DSP외부의 주파수 변조기 MAX038에 의하여 랜덤 주파수의 캐리어를 발생한다. 제안된 기법을 LF2407기반의 3상 유도모터 구동장치에 적용한 결과, 모터 전류파형은 종전의 방법과 유사한 파형을 유지하면서도 모터 전압 및 전류의 고조파 스펙트럼은 광대역 주파수로 분포시킬 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.400-404
• /
• 2000

All-optical clock recovery from a 10 Gb/s RZ signal has been demonstrated using an actively mode-locked figure-eight laser incorporating a semiconductor optical amplifier in the loop-mirror scheme. Optical pulses with 10 ps pulse width were modulated by a LiNb03 external modulator at $2^{23}-1$ PRES and injected into the clock recovery circuit to extract optical pulses with 12 ps width. Regeneration of the original bit pattern has been accomplished by modulating the recovered clock with the same modulator, and no power penalty was observed at $10^{11}$..

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.44-51
• /
• 2008

A stereo audio digital-to-analog converter (DAC) with a power amplifier using asymmetric pulse-width modulation (PWM) is presented. To adopt class-D amplifier mainly used in high-power audio appliances for head-phones application, this work analyzes the noise caused by the inter-channel interference during the integration and optimizes the design of the sigma-delta modulator to decrease the performance degradation caused by the noise. The asymmetric PWM is implemented to reduce switching noise and power loss generated from the power amplifier. This proposed architecture is fabricated in 0.13-mm CMOS technology. The proposed audio DAC including the power amplifier with single-ended output achieves a dynamic range (DR) of 95-dB dissipating 4.4-mW.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.146-151
• /
• 1999

We demonstrated a harmonic mode locking scheme that used regeneratie phase modulation to get a high and stable repetition rate in a figure-of-eight fiber soliton laser. From the detected beat spectra of the laser output, a sinusoidal clock freguency tone of 400 MHz, the 96th harmonics of the fundamental mode locking frequency, was extracted with a high Q filter and was used to drive the phase modulator, resulting in stable output of soliton pulse train synchronized with the modulation signal. Generated soliton pulses had FWHM pulsewidth of 930 fs and 3.1 nm linewidth, yielding pulsewidth-bandwidth product of 0.359 that was close to the transform limit. As the modulation frequency always followed the beat frequency of laser modes, stable harmonic mode locking was achieved without the adjustment of the cavity length, which has been commonly required in actively mode-locked lasers.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.364-368
• /
• 2012

We generate 10 GHz short pulses from a continuous wave laser at 1.5 um by cascaded intensity and phase modulation, followed by chirp compensation using a single mode fiber. The measured spectral and pulse widths are 0.64 nm and 5.7 ps respectively, resulting in the time-bandwidth product of 0.46.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11A
• /
• pp.1682-1690
• /
• 2000

최근들어 초광대역 시간 도약 임펄스 무선 전송(ultra wideband time hopping impulse radio; 이하 IR) 기술이 실내 무선 LAN이나 군용 무선 통신 시스템 등을위한 새로운대역 확산 전송 방식으로서 큰 관심을 모으고 있다 IR 시스템은 1(nsec) 이하의 매우 짧은 펄스폭의 펄스 위치 변조(pulse position modulation)된 가우시안 모노사이클 펄스열을 이용함으로서 매우작은 크기 의수 GHz에 이르는 초광대역 스펙트럼을 가지며 기존의 통신 시스템에 거의 간섭을 미치지 않으면서 사용 가능하다. 본 논문에서는 IR 시스템에 M진 (M-ary) PPM 방식을 적용하는 경우의 성능을 평가하였다. 특시 의사 잡음 부호 발생기와 10진 변환기(decimator)로 구성된 시간 도약 패턴을 사용하여 다원 접속 간섭이 배제되는 부가성 백색 가우시안 잡음 채널 하의 동기식(synchronous) IR 시스템에서, 심벌 수, M, 가우시안 모노사이클 펄스 폭 $\tau$$_{p}$, PPM에서 펄스 간 간격$\delta$, 펄스 반복 횟수 N$_{s}$ 등과 같은 다양한 시스템 파라미터의 조합에 따른 성능 변화를 모의 실험을 통해 확인하였으며, 이러한 결과를 통해 비트 오율, 시스템 복잡도 및 전송율 등의 사양에 따라 적합한 M 진 PPM IR 시스템의 구성 방안에 대한 근거를 제공하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.942-948
• /
• 2011

Solid propulsion systems have simple structures compared to other propulsion systems and are suitable for long-term storage. However the systems generally have limits on control of thrust levels. In this paper we introduce controllers for combustion chamber pressure using on-off control techniques which have been known for relatively easy implementation and energy efficiency. For this, we use a simple pressure change model by considering only mass conservation within the combustion chamber and we design a classical controllers and on-off controllers with are Pulse Width Modulation(PWM) and Pulse Width Pulse Frequency Modulation (PWPFM). Then we compare the performance results of the controllers through numerical simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.271-274
• /
• 2007

본 연구는 $1.3{\mu}m$ 파장의 초고속 Nd:YAG레이저 펄스를 얻기 위해 AOM을 이용하여 모드록킹 Nd:YAG레이저 공진기를 구성하였다. 여기용 반도체 레이저는 중심파장 810nm, 출력 1.2W이며, 레이저 매질은 직경 3mm, 길이 10mm로 $Nd^{3+}$가 1.0at%로 도핑된 Nd:YAG Rod를 사용하였다. 모드록킹에는 음향광학 변조기(변조 주파수 40MHz)를 사용하여 펄스폭 ${\tau}p=80ps$의 극초단 펄스를 얻었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.65-70
• /
• 2008

Capacitive position sensing with modulation technique is widely used in electrostatic actuator applications. To maximize the electrostatic force and the position-sensing gain, capacitors for driving and capacitors for sensing are shared, i.e, after applying the driving voltage with high-frequency modulating signals using op amps, the position is demodulated from the modulated signal. In high-voltage applications, however, low bandwidth of a high-voltage op amp hinders adding the high-frequency modulating signal to the driving voltage. In this paper, new and very simple driving and sensing method is proposed, in which the pulse-width modulated driving voltage eliminates the need of the high-frequency modulating signal for position sensing. This new algorithm is proved by the simulation results using Matlab/SIMULINK.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.