• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.1-12
• /
• 1999

For the phase measurement of radar signal in the coherent-on-receiver system, the COHO(Coherent Oscillator) generates the signal which locks to the phase of the transmit pulse. In this paper, COHO unit is developed to generate 60 MHz phase-locked signal. ILO(Injection Locking Oscilator) locks to the sample of the transmit pulse. Gate circuit, ILO, buffer amplifier, and pulse generator are designed and implemented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.48-48
• /
• 2010

현재 포항가속기연구소의 선형가속기에서 운전되고 있는 모듈레이터는 클라이스트론의 펄스 전원을 공급하는 펄스 전원공급 장치로서 출력은 최대 400 kV, 500 A, $7.5\;{\mu}s$의 펄스를 S band 클라이스트론에 공급한다. 모듈레이터의 고전압펄스 약 40 kV을 스위칭 하기위하여 진공스위치인 싸이라트론 스위치를 사용하고 있다. 모듈레이터 시스템에서 Jitter 발생 요인을 살펴보면, 대부분 싸이라트론 스위치회로에서 발생된다. 싸이라트론이 유발시키는 Jitter는 약 10 ns 이하이므로 매우 적다고 할 수 있다. 스위치의 Jitter가 적음에도 불구하고 모듈레이터 시스템에서 Jitter가 크게 발생한다면, 싸이라트론의 음극(cathode)에서 양극(anode)으로 흐르는 전자빔을 제어하는 Control Grid(G1 & G2)의 pulse 전압의 Jitter가 크기 때문이다. 싸이라트론 Grid 2에 공급되는 pulse 전압의 Jitter를 줄이는 것은 필수적이라 하겠다. 진공스위치인 싸이라트론 Grid에 pulse 전압을 공급하는 싸이라트론 드라이버 시스템의 안정화가 중요하므로 시제품 설계시 안정성을 충분히 고려하였다. 본 발표에서는 시제품으로 제작한 Thyratron Drive System의 기능 및 측정결과에 대해서 기술하고자 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.209-215
• /
• 2017

In this paper, an antenna having 2-axes cross monopulse for Ka band millimeter-wave seeker is designed and antenna performance is verified through vacuum-brazing method for fabrication and measurement. Also, by designing and manufacturing a waveguide circulator the antenna including the circulator is measured. Radiating part of the antenna takes optimized slot lengths and offsets from Elliot's array synthesis procedure using the generic algorithm and feeding part for cross monopulse axes uses the folded waveguide to optimize the S-parameter result. Based on this method, the antenna has 33.3 dBi gain, $3.5^{\circ}{\pm}0.5^{\circ}$ beamwidth, below -23 dB SLL through fabricating and measuring. It is found that antenna characteristics is similar to design results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.440-446
• /
• 2011

In this paper, a X-band 50 W pulsed solid state power amplifier(SSPA) is designed and fabricated for radar systems. The SSPA consists of a driver amplifier, a high power amplifier, and a pulse modulator. The high power stage employes four 25 W GaAs FET to deliver 50 W at X-band. To meet the stringent target specification for the SSPA, we used a new hybrid pulse switching method, which combine the advantage of pulse modulation and bias switching method. The fabricated SSPA shows a power gain of 44.2 dB, an output power of 50 W over a 1.12 GHz bandwidth. Also, pulse droop < 1 dB meet the design goals and a rise/fall time is less than 12.45 ns. Fabricated X-band pulsed SSPA size is compact with overall size of $150{\times}105{\times}30\;mm^3$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.389-396
• /
• 2015

A coil design of pulse induction metal detectors has been described. The search coil was demonstrated by using the wire with the diameter of 0.3 mm, 0.5 mm and 1.0 mm and the dielectric plate with the $30cm{\times}30cm$ and $35cm{\times}35cm$, the time constant and the currents of the coil as the variation of the coil size and the number of coil turns was characterized. The coil parameters like the resistance, the inductance and the time constants as the variation of the diameter of the wire, the coil size and the number of coil turns were compared and analysed through the calculation and the measurement. In addition, investigating the coil currents as the variation of the input pulse width, the coil design of pulse induction metal detectors has been discussed.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.563-572
• /
• 2006

Advantage that light transmission treatment way of most suitable through skin can investigate light directly in part ar there is difference in ability photoelectricity month by diverse complexion of horn character department which is branch or head of a family outside part of skin and treatment according to various patient can be inappropriate. By result that this research uses color information after search each color ingredient that ingredient of HIS and YIQ that use method, color information to use skin impedance way and color information through skin area ion and difference video to do fixed measuring by light investigation way by skin impedance corresponds to skin color in an experiment though is most universal result according to patient's skin model area detection each single person's skin model through videotex automatically create and because measuring, investigate skin color, energy, wave length, approximately, transmission time, model of most suitable that draw pulse delay and so on and want and special quality, and saved standard of disease treatment pulse modeling by skin impedance, and design and manufacture light investigation pulse modeling system of most suitable by skin subordinate, and constructed suitable treatment pulse database by skin color.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.484-491
• /
• 2008

In this paper, we design and fabricate the L-band high speed pulsed HPA using LDMOS FET. And we propose the high voltage and high speed switching circuit for LDMOS FET. The pulsed HPA using LDMOS FET is simpler than using GaAs FET because it has a high gain, high output power and sin81e voltage supply. LDMOS FET is suitable for pulsed HPA using switching method because it has $2{\sim}3$ times higher maximum drain-source voltage(65 V) than operating drain-source voltage($V_{ds}=26{\sim}28\;V$). As results of test, the output peak power is 100 W at 1.2 GHz, the rise/fall time of output RF pulse are 28.1 ns/26.6 ns at 2 us pulse width with 40 kHz PRF, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.261-268
• /
• 2016

In this paper, dual-polarized monopulse cassegrain antenna for W-band millimeter-wave seeker was proposed and the performances were verified by the measured results of the fabricated antenna. Dual-polarized monopulse Cassegrain antenna consists of main/subreflector, dual-polarized feed horn and monopulse comparator. The proposed feed horn has $2{\times}2$ array square waveguide feeding structure to make monopulse signals and it was designed using 90 degree rotational symmetric structure to receive dual-polarized signals. At the sum and difference channel, the measured vertical and horizontal polarization radiation pattern were similar. Measurement gains are 35.1 dBi for v-pol. and 35.6 dBi for h-pol. at the center frequency with 0.5dBi difference between each polarization and the side lobe level is below -21.6 dB.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.398-408
• /
• 2007

For better evaluation of material thickness by using the reflection type pulsed eddy current method, various probe models are designed and their response signals, characteristics, and sensitivities to thickness variation are investigated by a numerical analysis method. Since the sensor needs to detect magnetic fields from eddy currents induced in a test material, not from the exciter coil, two types of models that are shielded by the combination of copper and ferrite and only by ferrite are considered. By studying response signals from these shielded probe models, the peak value and the zero crossing time are selected as useful signal features for the evaluation of material thickness. Investigation of sensitivities of these two features shows that the sensitivity of peak value is more useful than that of zero crossing time and that the probe shielded only by ferrite gives much better sensitivity to thickness variation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.103-109
• /
• 2003

The development of a pulse gun used for the combustion stability rating test(SRT) has been domestically tried out since the SRT should be accompanied in the process of the development of LREs. At the beginning of the development, a rupture problem of the pulse gun body had been solved by changing its material and increasing its thickness. Also, the sealing test was undertaken for a pulse gun equipped with a membrane before conducting a explosion test and by using a specially designed jig after a explosion test. Since it is appropriate to reuse the holder of a pulse gun cavity for an actual SRT, a series of experiments for several variants has been taken to make it reusable. After all, the solution for a reusable holder of a pulse gun has been found and applied for complementing its specification.