• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1228-1234
• /
• 2015

In this paper, a fuzzy controller using thermoelectric for temperature environmental tester is developed. The new structure of fuzzy controller based temperature environmental tester is proposed and implemented to maintain a stable temperature and improve temperature change speed. In order to evaluate the efficiency, an experiment is setup to compare PID controller with our proposed controller. The experimental results, we proved that our proposed fuzzy controller has better performance than PID controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.363-371
• /
• 1999

In this paper proposes the optimal fuzzy controller design method using the genetic algorithm. Proposed method is that fuzzy rules and input - output scaling factors of the fuzzy controller are determined by using genetic algorithm that is very effectively in the optimization problem. The optimal fuzzy rules of servo system uses the fitness function which are the performance index in fuzzy controller. In order to verify excellent control performances of the proposed control method, we compare the control performance and characteristics about the proposed control method with a conventional fuzzy control method through a lot of simulations and experiments with one link manipulator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.6
• /
• pp.605-614
• /
• 1999

This paper addresses analysis and design of a class of complex single-input single-output fuzzy control systems. In the proposed method, the fuzzy model, which represents the local dynamic behavior of the given nonlinear system, is utilized to construct the controller. The overall controller consists of the local compensators which compensate the local dynamic linear model and the feed-forward controller which is designed via sliding mode control theory. Therefore, the globally stable fuzzy controller is designed without finding a common Lyapunov matrix. and shows improved perfonnance and tracking results by taking the advantages of fuzzy-model-based control theory and sliding mode control theory. Furthennore, stability analysis is conducted not Ibr the fuzzy model but for the real underlying nonlinear system. Two numerical examples are included to show the effcctiveness and feasibility of the proposed fuzzy control method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1246-1253
• /
• 2009

This paper presents derived a calculating form of fuzzy inference, based on decomposition of $\alpha$-level sets. Based on the calculating form it is propose that fuzzy logic circuits of PI+PD controller are a body from fuzzy inference to defuzzificaion in cases where the command variable u directly is generated PWM. The effect of quantization on $\alpha$-levels is investigated. with input/out characteristics of fuzzy controller by simulation. It is concluded that 4 quantization levels are sufficient result for fuzzy control performance of DC servo system. Simulation and experimental results demonstrated that the hardware implementation of the proposed controller can successfully provide good performance on the position control of DC servo system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.451-456
• /
• 2015

In this paper, an observer-based decentralized fuzzy controller is designed for discrete-time interconnected fuzzy systems. Based on the fuzzy subsystem of the interconnected fuzzy system, the observer-based decentralized fuzzy controller is considered. By using the fuzzy subsystem and the observer-based decentralized fuzzy controller, the closed-loop system is obtained. From the closed-loop system, the stability condition with the maximum interconnection bound is developed, and its sufficient condition is represented as the linear matrix inequality (LMI). Finally, the numerical example is provided to verify the effectiveness of the proposed technique.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.355-367
• /
• 2007

This paper proposes a design method of the PI(Proportional-Integral)+D(Derivative) controller using self-tuning of the design variables and controller gains. The used fuzzy PI+D controller is the approximated conventional continuos time linear PI+D controller and the used fuzzification method is the fuzzy single tone and the adapted defuzzification method is the simplified tenter of gravity. Fuzzy estimation result would be calculated in the other function elements from the classified fuzzy variables and the result determined by the design variables decides the controller gains. As a result, the proposed method shows the capability of the high speed tuning and can be applied to the case of input variables with many fuzzy partitions and also can bring out the advantage to reduce the reconstruction(digital sampling reconstruction) error. Most simulation results show that this controller makes much bettor efficiency and improvement by using design variables and controller gains.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.30-39
• /
• 2002

In this paper, we proposed a new circuit construction method that reduces the number of circuit devices of fuzzy controller. Sasaki had defined a new operator to eliminate the divide circuit comparing with the center of gravity method which often using to design the fuzzy controller. In this paper we obtained the more compacted fuzzy controller's circuit by using the proposed definition of fuzzification and defuzzification than using the Sasaki's method and the fuzzification and defuzzification are reverse operation each other. Using these definitions we exhibit the new design method and circuit structure that can eliminate the bounded product(BP) circuit included in Sasaki's circuit. Using the proposed method to level controlling of the water tank, we verified the fuzzy controller's performance by using existent method and proposed method. As a result that are calculated by using the Proposed fuzzy controller to level controlling of the water tank, total numbers of blocks and devices were decreased. If the number of variables and antecedents are Be11ing larger, this method is more efficient.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.2
• /
• pp.52-65
• /
• 1997

This paper presents a design technique of self tuning fuzzy controller for load frequency control of power system. The proposed parameter self tuning algorithm of fuzzy controller is based on the gradient method using four direction vectors which make error between inference values of fuzzy controller and output values of the specially selected optimal controller reduce steepestly. Using input-output data pair obtained from optimal controller, the parameters in antecedent part and in consequent part of fuzzy inference rules are learned and tuned automatically using the proposed gradient method. The related simulation results show that the proposed fuzzy controller is more powerful than the conventional ones for reductions of undershoot and steady-state load frequency deviation and for minimization of settling time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.120-125
• /
• 2005

In this paper, We propose the fuzzy controller for the gain tuning of PID controller The proposed controller doesn't use the crisp output error and rule tables though with a fuzzy inference process in forward fuzzifier, New Fuzzy PID Controller assigns relations and ranges of two variables of PID gain parameters. These new gain parameters are calculated by the fuzzy inference with max-min ranges of Kp and Kd. The Ki parameter is computed automatically between Kp and Kd parameter Is calculated by Ziegler-Nickels tuning rules. Finally we experimented the propose controller by the hydraulic servo motor control system. We can obtained desired results through the good control characteristics.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2002

The mission life of a satellite determines the amount of fuel required on-board, while the total mass requirement limits the fuel to be loaded. Hence, for the design of thruster control loop, not only the satellite pointing accuracy but the saving of fuel is to be considered. In this paper, a two-step fuzzy controller is proposed for the thruster control loop to save fuel consumption. This approach combines requirements for pointing control accuracy with minimum fuel consumption into a fuzzy controller design. To demonstrate this approach, we have designed a fuzzy controller for the Sun Pointing Mode of KOMPSAT-1. The performance of this fuzzy controller design is compared with that of PD controller used for KOMPSAT-1.