• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1327-1335
• /
• 2017

This study was carried out to determine the effect of cacao bean addition on the physicochemical properties of extruded rice flour. Rice-based cacao beans (0, 20, 40, 60%) were extruded at a die temperature of $130^{\circ}C$, screw speed of 200 rpm, and moisture content of 25%. As the content of cacao beans increased from 20% to 60%, expansion index decreased, while piece density and specific length increased. The water soluble index and water absorption index of the extrudate increased through extrusion cooking. Lightness decreased as cacao bean content increased while redness increased. As the content of cacao beans increased, paste viscosity decreased. Cold peak viscosity was observed in all extrudates of raw roasted cacao beans. ${\alpha},{\alpha}$-Diphenyl-${\beta}$-picrylhydrazyl (DPPH) radical-scavenging activity increased upon extrusion and cacao bean addition. As content of cacao beans increased, non-roasted cacao beans had higher total phenolic contents than roasted cacao beans. This study showed that addition of cacao beans to extruded rice snack improved antioxidant activity.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.150-157
• /
• 2017

The objective of this study was to determine the effect of moisture contents (40, 50, 60%) and $CO_2$ gas injection (0 and 800 mL/min) on physicochemical properties of extruded soy protein isolate (SPI). The expansion ratio and the specific length increased, but piece density decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at both 40 and 50% moisture contents. On the contrary, the expansion ratio and the specific length decreased, but piece density increased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at 60% moisture content. Extruded SPI with $CO_2$ gas injection at 800 mL/min had small cell size and higher amount of cell than extruded SPI without $CO_2$ gas injection. The water holding capacity and nitrogen solubility index increased, and the integrity index and the texture decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min. In conclusion, extruded SPI with the $CO_2$ gas injection at 800 mL/min showed better expansion properties and cell formation than extruded SPI without the $CO_2$ gas injection.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.3
• /
• pp.213-220
• /
• 2000

본 연구는 찹쌀가루액에 효소처리 및 미생물 접종을 시킴으로써 유과의 제조시 수침과정을 거치지 않고도 유과를 만들수 있는 새로운 방법을 개발하기 위하여 시도되었다. 찹쌀 수침액에 분포된 미샐울은 Bacillus sp와 Lastobacillus spp.로 나타났다. 찹쌀 수침액에 인위적으로 상기 미생물을 배양하였을 대 유과를 제조하기 위한 최적 조건은 3$0^{\circ}C$에서 18시간 이었다. 이때 찹쌀수침액의 PH는 배양시간이 증가함에 따라 증가하였다. 이 찹쌀 수침액에서는 수침시간이 증가함에 따라 $\alpha$-amylase 활성이 증가하여 효소처리된 시료액의 효소 활성화 유사한 경향을 나타내었다. 유과의 팽화도는 효소처리시킨 혼합 접종처리 군을 제외한 모든 처리군에서 28일간 수침한것과 유사하게 나타났다. 경도와 peak수는 모든 처리순에서 28일간 수침시킨 대조군에 비해 유의적으로 더 낮게 나타났다.(P<0.05). 미세구조에서 기공수는 효소처리시킨 단독 접종군이 다른 모든 처리군에 비해 더 많은 기공수를 지니고 있었고 기공의 둘레 및 면적도 유의 적으로 낮은 수치를 나타내었다. .(P<0.05). 따라서, 수침공정을 대폭 단축할 수 있었으며, 향후 미생물 접종을 고려한 효소처리 조건을 정밀 분석한다면 수침공정이 없어도 유과의 품질특성을 나타내는것이 가능할 것으로 보인다.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.164-169
• /
• 1995

Fictitious experiment to control extrusion process was carried out using the fuzzy theory. Algorithm of the fuzzy logic controller(FLC) was made based on the general principles of extrusion. In the simulation, at first, thickness of extrudate was measured as feedback input variable. Secondly, a set point of screw speed was determined as output variable of extruder operating condition through FLC. Finally, the thickness of extrudate was controlled as a given set point. Barrel heater was simply controlled as on/off state, which was not fuzzy controlled.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.272-277
• /
• 1990

Some additives were applied to improve Yukwa(Popped rice snack) quality and process modifications were tested for cutting down soaking time and application of rice flour. Addition of soaked soybean (3%, w/w) to dough showed higher expansion rate and better physical properties with more acceptable quality by sensory evaluation of Yukwa. Baking powder, modified starch and alcoholic liquor, Mackeali(rice wine, turbid). Soju(distilled liquor) and Yakju(rice wine, clear), were no positive effect on quality of Yukwa but alcoholic liquor gave more fine texture than others. High temprature soaking $(60^{\circ}C)$ of rice for 3 hours which is near gelatinization temperature of rice starch. gave same quality of Yukwa comparing with long time soaking (12 hours) at room temperature. Extention of high temperature soaking (12 hours) did not improve the quality of Yukwa. The 100 mesh of rice flour by dry milling method was better in expansion rate and hardness than 40 and 80mesh but it was worse than ordinary wet milling. It was notified that milling method and milling mechines for Yukwa preparation should be studied in more detail.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.820-826
• /
• 2017

Soybean is one of the most common food materials for making traditional Korean foods such as soybean paste, soy source and soy snack, and their manufacturing processes include heat treatment of soybean. This study was carried out to investigate the effect of heat treatment on the physicochemical properties of soybean. All samples were heat treated under commercial steamed, puffed or air-fried conditions, and then the protein molecular weight distribution, thermal properties, fluorescence intensity, protein solubility, and water and oil holding ability of the heat treated soybeans were examined. Sodium dodecyl sulfate polyacrylamide gel electrophoresis indicated that heat treatment caused fragmentation of polypeptide chain in soybean, showing the band of low molecular ranging from 17 to 40 kDa. The differential scanning calorimetric analysis showed the decrease of enthalpy values (${\Delta}H$) by heat treatment. Fluorescence spectroscopy indicated that the heat treatment caused lipid oxidation as proved by increasing emission intensity. The protein solubility at pH 3-6, and water holding capacity of heat treated soybeans were the higher than no treatment. These results suggest that the heat treatment resulted in decreased enthalpy values, and increased protein degradation, lipid oxidation and water affinity of soybean. Moreover, the effect of heat treatment on physiochemical properties of soybeans was more significant under air-fried condition.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2010

This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130$^{\circ}C$, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.643-649
• /
• 2012

Lab scale experiment study was carried out for biological treatment process development in cruise. SBR(Sequence Batch Reactor) process with BM(Beneficial Microorganisms) was investigated for practical application on shipboard sewage treatment. From the results it was suggested that SBR process with BM might be a suitable process for advanced cruise sewage treatment in terms of decrease in T-N and T-P, maintenance of useful microorganisms and control of sludge bulking. By adding BM to SBR system, about 40% of EPS in sludge was increased, about 74% of total nitrogen was reduced and the total phosphorus reduction averaged 75%.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1008-1012
• /
• 1995

Glutinous rice was microparticulated and air-classified at different air classifying wheel speeds (ACWS) of 20,000 rpm and 15,000 rpm in a Turboplex classifier. The starch was concentrated to a coarse fraction and the protein was shifted to a fine fraction. The degree of starch damage of the coarse fraction was comparable to that of traditionally soaked glutinous rice. Yoogwa(Korean cracker) made from the fractions of $ACWS\;15,000{\sim}20,000\;rpm$ and below ACWS 15,000 rpm was very comparable to that made by the traditional method in degree of puffing, hardness and internal structure. It was also confirmed by the sensory evaluation, indicating that the microparticulation/air classification technology could be applied to produce raw material of Yoogwa. The developed noble process could exclude the long soaking step in the traditional Yoogwa process and reduce the pretest time remarkably.