• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.139-143
• /
• 2004

최근 고 해상도 위성영상정보의 민간 활용에 대한 수요가 증가하면서 기존의 공간 정보를 다루는 여러 응용분야에서 이에 관련된 많은 연구를 하고 있다. 도시교통 환경 분석을 위하여 위성영상정보를 처리하는 과정에 있어서 도로, 건물, 기타 선 구조와 같은 지형지물을 분석하는 과정은 사용자에 따라 주관적일 수 있다. 이러한 배경에서 수학적 그레이 레벨 모폴로지는 하나의 효과적인 접근으로 간주된다. 본 연구에서 지형지물 추출을 위해 윈도우 운영체제에서 실행되는 실질적인 응용 프로그램을 구현하였다. 이 프로그램에서 주요한 지형지물은 그레이 레벨 영상을 이용하여 개방(opening), 폐쇄(closing), 침식(erosion), 팽창(dilation)의 순차적 처리를 통하여 자동적으로 추출된다. 결과적으로, GDPA, 허프 변환 또는 다른 알고리듬들과 비교시 하나의 이점이 된다. 모폴로지 처리와 같이 본 프로그램은 그레이 레벨 값의 범위에 기반하여 지형지물을 추출을 위한 density slicing 기능 또는 주어진 경계치 보다 작은 화소 군집을 제거하는 처리인 'sieve filtering'을 제공한다. 이러한 기능들은 형태학적으로 처리된 결과를 증대하고 지형지물 종류들을 분리하는데 유용하다. 또한 배경의 제거, 잡음 탐지, 도시 환경 원격 탐사에서의 지형지물 특성화에 기여한다. 본 프로그램을 이용하는데 있어서 IKONOS 위성영상을 이용하여 시험 구현하였다. 결과, 다중 경계치 또는 steve filtering을 이용한 그레이 레벨 모폴로지 처리는 복잡한 지형지물과 많은 데이터로 구성된 고해상도 영상 내의 주어진 대상에서 자동적인 처리와 사용자 정의 sieve filtering으로 인한 효과적인 지형지물 추출 방법으로 간주 된다. 시안을 작성 표준화를 위한 첫 단계 시도를 소개하였다.분석 결과는 문장, 그림 및 도표, 장 끝의 질문, 학생의 학습 활동 수 등이 $0.4{\sim}1.5$ 사이의 값으로 학생 참여를 적절히 유도하는 발견 지향적 인 것으로 조사되었다. 그러나 장의 요약은 본문 내용을 반복하는 내용으로 구성되었다. 이와 같이 공통과학 과목은 새로운 현대 사회에 부응하는 교과 목표와 체계를 지향하고 있지만 아직도 통합과학으로서의 내용과 체계를 완전히 갖추고 있지 못할 뿐만 아니라 현재 사용되고 있는 7종의 교과서가 교육 목표를 충분히 반영하지 못하고 있다. 따라서 교사의 역할이 더욱더 중요하게 되었다.괴리가 작아진다. 이 결과에 따르면 위탁증거금의 징수는 그 제도의 취지에 부합되고 있다. 다만 제도운용상의 이유이거나 혹은 우리나라 주식시장의 투자자들이 비합리적인 투자형태를 보임에 따라 그 정책적 효과는 때로 역기능적인 결과로 초래하였다. 그럼에도 불구하고 이 연구결과를 통하여 최소한 주식시장(株式市場)에서 위탁증거금제도는 그 제도적 의의가 여전히 있다는 사실이 확인되었다. 또한 우리나라 주식시장에서 통상 과열투기 행위가 빈번히 일어나 주식시장을 교란시킴으로써 건전한 투자풍토조성에 저해된다는 저간의 우려가 매우 커왔으나 표본 기간동안에 대하여 실증분석을 한 결과 주식시장 전체적으로 볼 때 주가변동율(株價變動率), 특히 초과주가변동율(超過株價變動率)에 미치는 영향이 그다지 심각한 정도는 아니었으며 오히려 우리나라의 주식시장은 미국시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며,

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.173-178
• /
• 2004

Silicon thin film were synthesized from silane and argon gas mixture directly on copper foil by rf PECVD and then lithium ion batteries were prepared from them employed as the negative electrodes without any further treatment. In the present study, two different kinds of silicon thin films, amorphous silicon and copper silicide were prepared by changing deposition temperature. Amorphous silicon film was prepared below $200^{\circ}C$, but copper silicide film with granular shape was formed by the reaction between silicon radical and diffused copper ions under elevating temperature above $400^{\circ}C$. The amorphous silicon film gives higher capacity than copper silicide, but the capacity decreases sharply with charge-discharge cycling. This is possibly due to severe volume changes. The cyclability is improved, however, by employing the copper silicide as a negative electrode. The copper silicide plays an important role as an active material of the electrode, which mitigates volume change cause by the existence of silicon and copper chemical bonding and provides low electrical resistance as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.65-70
• /
• 1996

엔진소음을 소음특성에 따라 분류하면 공력소음(Aerodynamic Noise), 연소소음(Combustion Noise), 기계적인 소음(Mechanical Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise), 흡기계소음(Intake System Noise), 냉각계소음(Cooling System Noise), 엔진표면소음(Engine System Noise)등으로 분류할 수 있다. 이러한 여러소음중 엔진 내부의 유동에 의한 흡배기계통으로의 소음방출은 자동차 실 내외 소음의 중요한 문제로 대두되는데, 이를 줄이기 위해 그 동안 소음기 등의 서브시스템의 형태와 그 위치조정에 관한 연구가 수행되어 왔다. 그러나 이것이 비용 또는 성능에 영향을 미치므로 본질적인 소음원을 규명해 내는 것이 필요하게 되었다. 흡배기계의 소음은 엔진의 흡입, 배기행 정시 피스톤의 운동에 의해 팽창 및 압축파 형태의 압력파(pressure wave)로 발생하게 되고, 밸브근방에서는 유동의 박리(separation)에 의해 발생하게 된다. 소음기 등의 서브시스템에서도 유동의 박리에 의해 발생하게 되며 특히 배기행정시 발생하는 압력파는 비선형영역에 있게된다. 흡기소음은 배기에 비해 그 크기가 작아서 그동안 등한시 되어왔으나 이것이 소비자의 불평요인으로 작용하므로써 이에 대한 연구도 활발히 수행되어야 한다. Bender, Bramer[1]는 흡배기계 소음의 외부 방사에 관하여 전반적으로 기술하였고 Sierens등[2]은 흡기계에서 1차원 MOC(Method of Characteristics)방법으로 비정상 유동해석을 하고 실험결과와 비교하였다. J.S.Lamancusa 등[3]은 흡기 소음원을 실험을 통해 예측하였고, 흡기소음도 비선형 거동을 보인다고 밝혔다. Yositaka Nishio 등[4]은 새로운 흡기실험장치를 고안하여 공명기(resonator)의 위치 변화에 의한 저소음 흡기계를 설계 초기단계에서부터 적용하려 하였다. 일반적으로 흡배기계의 복잡한 형상 때문에 대부분 실험을 통해 문제를 해결하려 하였고, 수치해석은 피스톤의 운동을 배제한 단순화한 흡배기계의 정상상태 유동해석이 주를 이루어왔다. Taghaui and Dupont 등[5]은 KIVA코드를 사용하여 흡기포트와 연소실 그리고 밸브의 움직임을 동시에 고려한 수치해석을 도입하였다. 하지만 이들이 밸브의 운동을 고려하기 위해 사용한 이동격자는 격자점은 시간에 따라 변화하지만 그 격자의 수가 일정하게 유지되어 있어서 밸브의 완전개폐를 해석할 수가 없다. 강희정[6]은 단일 실린더와 단일 배기밸브를 갖는 문제로 단순화하여 피스톤과 밸브의 움직임을 고려하므로써 배기행정 후 소음이 어떻게 전파해 나가는가를 연구하였다. 본 연구에서도 최소밸브간격과 최대밸브간격 사이에서만 계산이 가능하나 흡기의 경우는 밸브가 닫힐 때 생기는 압력파가 중요하므로 실린더와 밸브사이에 벽면조건을 주어 밸브의 개폐를 모사하였다.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.649-691
• /
• 2018

A number of studies on the educational influence of drama and theatre have increased since the 1990s in South Korea. These days, more Korean researchers seem to have recognised the educational influence of drama and theatre than before. At this time, it is meaningful to look into how the domestic trend of studies has changed and developed over the past thirty years. This paper especially adopted a bibliometric method to analyse the trend by time of studies from the late 1990s to 2017. In addition, target age, research topic and research approach of each study were investigated. Some of terminologies particularly used in South Korea were also defined to help young researchers' understanding in this paper. In detail, the total number of studies for the last thirty years is 225 and the first domestic study on the educational power of drama and theatre was published in 1994. In the 2000s, there was quantitative expansion in terms of the number of studies and topics. Eventually pragmatic and integrated features of the studies were found in the 2010s. It is anticipated that the pragmatic and integrated features of the studies will be stimulated to fit into the need of the time. Until now, the most fevered research target age was mainly primary school students. However, it would be possible to widen a target age range in the future. It should be considered having collaboration among researchers who have different expertises for conducting higher quality studies.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.5
• /
• pp.5-17
• /
• 2021

In this study, the shear behavior between pile-sandy soil interface was quantified based on series of rigorous ring shear test results. Ring shearing test was carried out to observe the shear behavior prior to failure and behavior at residual state between most commonly used pile materials - steel and concrete - and Jumunjin sand. The test was set to clarify the shear behavior under various confinement conditions and soil densities. The test results were converted in to representative friction angles for various test materials. Additional numerical analysis was executed to validate the accuracy of the test results. Based on the test results and the numerical validation, it was found that due to the dilative and contractive nature of sand, its interface behavior can be categorized in to two different types : soils with higher densities tend to show peak shear stress and moves on to residual state, while on the other hand, soils with lower densities tend to show bilinear load-transfer curves along the interface. However, the relative density and the confining stress was found to affect the friction angle only in the small train range, and converges as it progresses to large deformation. This study established a large deformation analysis method which can successfully simulate and predict the large deformation behavior such as ring shear tests. Moreover, the friction angle derived from the ring shear test result and verified by numerical analysis can be applied to numerical analysis and actual design of various pile foundations.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.971-978
• /
• 2017

Danggui leaf (Angelica acutiloba Kitagawa) has numerous dietary fiber and healthy functional properties such as anti-inflammatory activity. However, it is usually discarded after its roots are harvested. For wide application of danggui leaf, squeezed danggui leaf juice was used for making pan bread. Treatments included imported wheat flour (IMWF) and domestic wheat flour (DOWF) as a control, 1% soluble solid contents of squeezed danggui leaf juice instead of wheat flour (1% SDLJ), 2% SDLJ, 3% SDLJ, and 4% SDLJ. In the fermentation expansion, dough volume was not significantly different between DOWF and 1% SDLJ, whereas it decreased according to increased amount of squeezed danggui leaf juice. Regarding physical properties, springiness and cohesiveness decreased according to increased amount of squeezed danggui leaf juice and longer storage period. Gumminess, brittleness, and hardness increased according to increased amount of squeezed danggui leaf juice, although these were not statistically different among IMWF, DOWF, and 1% SDLJ after making pan bread. Principal component analysis (PCA) was performed to assess the correlation between storage period and physical properties. In the PCA, variance proportion of principal component (PC) 1 was 0.87 while that of PC 2 was 0.10. Further, 1% SDLJ showed similar results as DOWF and INWF after making pan bread and after 3 days of storage. In conclusion, use of 1% SDLJ is desirable for making squeezed danggui leaf juice.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.11
• /
• pp.5-14
• /
• 2016

The main objective of this study was to evaluate the removal properties of Cu from existing exfoliated vermiculite (EV) coated with a mixed solution of sulfuric acid and glycerol on the $580^{\circ}C$ in heating, which uses coated with glycerol of copper ions can be removed more effectively. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for Cu in aqueous solution. The result of batch kinetic test shows that removal rate, $K_{obs}$ (1/hr), of Cu are 0.579, 0.878, 3.459, and 6.578 for MEV weight 1 g (25 g/L), 2 g (50 g/L), 3 g (75 g/L), 4 g (100 g/L), respectively. In this case the initial pH of the solution was 3.26. The removal experiment according to the concentration, $K_{obs}$ (1/hr), of Cu are 1.96, 0.878, 1.25, and 1.04 for the initial concentration of 3 mg/L, 5 mg/L, 8 mg/L, 10 mg/L, and the initial pH of the solution are 3.46, 3.26, 3.10, 2.96, respectively. Influence of initial pHs on Cu removal were tested under 1g of MEV with 5 mg/L of Cu solution. $K_{obs}$ (1/hr) were increased from 0.263 (pH 3) to 0.525 (pH 5). It leads to the conclusion that the removal rates are inversely proportional to the initial Cu concentration and are increased proportional to the initial pHs. Sorption capacity of MEV was determined by batch sorption tests. The maximum sorption capacity ($Q_{max}$) obtained from Langmuir was 0.761 mg/g, Linear and Freundlich partition coefficients were 0.494 L/g and 0.729 L/g (1/n = 0.476). These results show that the MEV could be used as an excellent adsorbent for copper contained in various types of aqueous solutions.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.35-45
• /
• 2006

Plants of Vitex negundo are known to develop numerous trichomes throughout their body, where certain trichome types have been believed to be one of the plausible structures for the unique scents. In the current study. structural aspects of the trichomes have been examined in leaves and stems of Vitex negundo using TEM and SEM. Trichome types as well as structural changes that occurred in certain trichomes during secretion have been mainly focused. Three type of glandular trichomes and two types of non-glandular trichomes were developed in the epidermis of young and mature Vitex negundo plants. The glandular trichomes included the peltate type (Type 1), the capitate type (Type 2), and degraded capitate type (Type 3), whereas the non-glandular warty trichomes contained the multicellular (Types 4) and unicellular type (Type 5). Type 1 and 2 consisted of head and stalk cells, but their number and size were different. One secretory cavity was formed from the four head cells in the former, but only two head cells were involved in the latter. The cytoplasmic density in the head cell was quite high and in particular, sER and Golgi bodies were well developed. At initiation of their development, the cuticle layer of the head cells separated from the outer tangential wall to form a secretory cavity. Subsequently the cavity expanded acropetally and a large number of secretory vesicles continuously produced from the head cells until they filled the entire cavity. The cavity contained materials that would be soon discharged into intercellular spaces and/or into the air. The cavity began to decrease the volume by contracting at initial secretion but degrade rapidly within short time. It has been suggested that the mode of secretion in V. negundo is probably the eccrine secretion, since no break or rupture of the cavity has been observed during examination. Contrastingly Type 3 exhibited deterioration of the head cell at early stage. Type 4 was about $110{\sim}190{\mu}m$ long, consisting of $2{\sim}3$ cells, and distributed more in the adaxial epidermis compared to the abaxial surface. However, $20{\sim}30{\mu}m$ long Type 5 was extremely dense in both epidermis. Among several trichome types, Type 1 and 2 probably play an important role in discharging unique aromatic scents in plants of V. negundo.