• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.576-584
• /
• 1988

Neutral detergent fiber(NDF) were extracted from the Nampung, Milyang #23, Whasung and Jinhung varieties of rice by neutral detergent fiber method. To determine the properties of NDF three factors were measured : water-binding capacity(WBC), Fe-binding capacity and sodium taurocholate binding with NDF. The average WBC of NDF was $5.60{\pm}0.87gH_2O/g$ NDF, and the average Fe-binding capacity ranged from 24.63% at pH 5.0 to 19.6% at pH 6.0 and 48.98% at pH 7.0. Binding of sodium taurocholate with NDF was determined in vitro using C-14 labeled sodium taurocholate at 100M sodium taurocholate concentrations. NDF binding of Jinhung was 27.87 while Nampung, Milyang #23 and Whasung measured 32% each. When sodium taurocholate concentrations were raised from $40{\mu}M\;to\;240{\mu}M$ the tendency of binding increased as the concentrations increased, but not linearly.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.97-136
• /
• 2004

The Northeast Asian air cargo market has expanded tremendously as a result of the opening up of the Chinese market. The importance of the Asia-Pacific region in the global air transport has also increased. The exchange of human and material resources, services, and information in Northeast Asia, which is expected to increase in the near future, requires that the airlines operating within this region adopt a more liberalized approach. This paper introduced alternatives which can be applied to the Northeast Asian airlines industry so as to bring about the integration of regional air transport: First, this paper found a need for individual Northeast Asian nations to alter their policies towards the airlines industry. Second, each country should further liberalize their respective domestic air transport. Third, there is a need for freer air service agreements to be signed between the nations of Northeast Asia. Fourth, the strategic alliances between the airlines operating in Northeast Asia should be further strengthened. Fifth, this liberalization process should be carried out in an incremental manner, beginning with more competitive airports and routes, or with less-in-demand routes. Sixth, there is a need for a shuttle system to be put into place between the main airports in China, Korea, and Japan. Seventh, these three nations jointly develop aviation safety and security systems that are in accordance with international standards. Eighth, the liberalization process of the aviation industry should be undertaken in conjunction with other related fields. Ninth, organizations linking together civil aviation organization in the Asia-Pacific area should be formed, as should each government linking together. By doing so, these countries will be able to establish regular venues through which to exchange opinions on the integration and liberalization of the air cargo market so as to induce the gradual liberalization of the actual market. The liberalization of the air transport in Northeast Asia will prove to be a daunting task in the short term. However, if the Chinese airlines continue to exhibit continuous growth and Japanese airlines are able to complete their move towards a low-cost structure, this process could be completed earlier than expected. Over the last twenty five years the air transport has undergone tremendous changes. The most important factor behind these changes has been the increased liberalization of the market. As a result, rates have decreased while demand has increased. This has resulted in turning the air transport industry, which was long perceived as an industry in decline, into a high-growth industry. The only method of increasing regional exchanges in the air transport is to pursue further liberalization. The country which implements this liberalization process at the earliest date may very well emerge as a leading force within the air transport industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2386-2396
• /
• 1996

A numerical simulation has been performed for isothermal and reacting flows in an exisymmetric, bluff-body research combustor. The present formulation is based on the density-weighted averaged Navier-Stokes equations together with a k-epsilon. turbulence model and a modified eddy-breakup combustion model. The PISO algorithm is employed for solution of thel Navier-Stokes system. Comparison between measurements and predictions are made for a centerline axial velocities, location of stagnation points, strength of recirculation zone, and temperature profile. Even though the numerical simulation gives acceptable agreement with experimental data in many respects, the present model is defictient in predicting the recoveryt rate of a central near-wake region, the non-isotropic turbulence effects, and variation of turbulent Schmidt number. Several possible explanations for these discrepancies have been discussed.

• Korean Security Journal
• /
• no.36
• /
• pp.177-200
• /
• 2013

As we enter a high industrial society that widens the gap between the rich and poor, demand for the security services has grown explosively. With the growth in quantitative expansion of security services, people have also placed increased requirements on more sophisticated and diversified security services. Consequently, market outlook for private security services industry is positive. However, Korea's private security services companies are experiencing difficulties in finding a direction to capture this new market opportunity due to their small sizes and lack of management-strategic thinking skills. Therefore, we intend to offer a direction of development for our private security services industry using a management-strategy theory and the Analytic Hierarchy Process(AHP), a structured decision-making method. A resource-based theory is one of the important management strategy theories. It explains that a company's overall performance is primarily determined by its competitive resources. Using this theory, we could analyze a company's unique resources and core competencies and set a strategic direction for the company accordingly. The usefulness and validity of this theory has been demonstrated as it has often been subject to empirical verification since 1990s. Based on this theory, we outlined a set of basic procedures to establish a management strategy for the private security services companies. We also used the AHP method to identify competitive resources, core competencies, and strategies from private security services companies in contrast with public companies. The AHP method is a technique that can be used in the decision making process by quantifying experts' knowledge and unstructured problems. This is a verified method that has been used in the management decision making in the corporate environment as well as for the various academic studies. In order to perform this method, we gathered data from 11 experts from academic, industrial, and research sectors and drew distinctive resources, competencies, and strategic direction for private security services companies vis-a-vis public organizations. Through this process, we came to the conclusion that private security services companies generally have intangible resources as their distinctive resources compared with public organization. Among those intangible resources, relational resources, customer information, and technologies were analyzed as important. In contrast, tangible resources such as equipment, funds, distribution channels are found to be relatively scarce. We also found the competencies in sales and marketing and new product development as core competencies. We chose a concentration strategy focusing on a particular market segment as a strategic direction considering these resources and competencies of private security services companies. A concentration strategy is the right fit for smaller companies as a strategy to allow them to focus all of their efforts on target customers in a single segment. Thus, private security services companies would face the important tasks such as developing a new market and appropriate products for such market segment and continuing marketing activities to manage their customers. Additionally, continuous recruitment is required to facilitate the effective use of human resources in order to strengthen their marketing competency in a long term.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Journal of Hospice and Palliative Care
• /
• v.12 no.1
• /
• pp.27-31
• /
• 2009

Purpose: Lymphedemas are tissue fluid swellings, usually on the arms or legs, and occur as a result of impaired lymphatic drainage. Presently, the most effective treatment available is complete decongestive physiotherapy (CDP). However, this therapy is ineffective in some patients and surgery may be indicated. Herein, we examined the efficacy of minimally invasive needle aspiration of the most enlarged areas in hypodermic adipose tissues, of patients who had failed CDP. Methods: We included 21 patients who were diagnosed with lymphedema stage II-III in the upper or lower extremities and visited the lymphedema clinic at a university hospital from September 1, 2003 to February 28, 2004. All patients had been treated with CDP at least once, but had failed to respond to the therapy for more than one year. Nine patients had breast cancer and 12 had cervical cancer. We identified the area with the most severe edema by using MRI and performed a 16-gauge angio-needle aspiration on the area. The patients were followed up for 3 months. Effectiveness of the treatment was evaluated by comparing the volume of edema before and after the treatment using Wilcoxon signed rank-test. Results: The mean reduction ratio of the volume of edema comparison normal volume was 41.1${\pm}$35.3% (P=0.001). There were no major or minor operative complications except localized hemorrhage. Conclusion: We conclude that a needle aspiration prior to other surgical treatments is relatively safe and effective for those patients who are unresponsive to CDP.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.19-35
• /
• 2001

Outlines for plasma $estradiol-17\beta$, components, electrophoretic patterns, and ultrastructural changes were obtained in female rainbow trout (Oncorhynchus mykiss) during the seasonal reproductive cycles. Plasma $estradiol-17\beta$ under the natural conditions, exhibited distinct seasonal variation, peaking very late in vitellogenic season during September, decreasing gradually the halt of spawning in December, and ultimately falling during the early stages of seasonal ovarian recrudescence in February and March. This change in $estradiol-17\beta$ appeared to stimulate vitellogenin production as evidenced by increases in plasma calcium, phosphorus, glucose, albumin and total protein levels. The electrophoretic patterns of late maturing or spawning oocytes were stained more intensively than those of late perinucleolus oocytes (molecular weights of approximately 70,000 and 200,000). Two protein bands were found in the SDS-PAGE separation, coincident with the $estradiol-17\beta$ hormone peak. Gonadosomatic indices (GSI) significantly increased from October to January, and showed the highest peak in January, coinciding with the numerically abrupt increase of ripe ova in female. A positive correlation (r=0.701, p<0.01) was established between plasma $estradiol-17\beta$ levels and the gonadosomatic index during the prespawning. The highest level of hepatosomatic index (HSI) observed in December. During the breeding season (December), the gonadotropes were large and filled with GTH-containing inclusions such as granules and globules. The vitellogenic phase began as late perinurleolus oocytes became transformed into early maturing oocytes through the accumulation of yolk, and oocytes reached the late maturing stages as the ooplasm was completely packed with yolk. Marked ultrastructural changed in the granulosa cells during nuclear migration involve the dilation of the rough endoplasmic reticulum and the appearance of the rod-shaped mitochondria with tubular cristae. Microvilli (finger-like projections), from the zona radiata and from the oocyte grew, and made contact with each other in the pore canals of the zona radials during vitellogenesis, but were withdrawn as the zona radiata became more compact and devoid of pore canals during oocyte maturation. The zona radiata grew to a tripartite structure such as an outer thin homogeneous layer, and two inner thick helicoidal layers (zona radials interna and zona radiata externa). Under the normal conditions, the ovarian follicle influenced the histological development and periodical secretion of the hormones , sufficient for a oogenesis and gonadal steroid production.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5819-5826
• /
• 2011

Recently in the dental world, competition in the medical industry has been intensified due to the prolonged economic stagnation, the quantitative expansion of medical institutions, the enhancement of medical consumers'awareness of rights, and the diversity of medical consumer needs. Dental institution management of the difficulties is the requirement for dental institution to ensure competitiveness. So Word-of-Mouth marketing, which creates high marketing effectiveness with low cost, needs to be actively utilized as a new alternative to mass communication marketing. This research is to accurately grasp the target group of dental medical marketing activities through research on the degree of customer loyalty and Word-of-Mouth effects according to character trait of the patients visiting dental clinics, and to present the basic data for Word-of-Mouth marketing strategies from a viewpoint of practical business through presenting Word-of-Mouth promotion factors. To achieve this, questionnaire survey was conducted on 10 dental clinics located in Daegu for 4 weeks from April 11, 2011 to May 6, 2011 and 612 copies of responses to the questionnaires for final data for analysis were obtained. The results of the analysis are as follows. There were no significant differences in the degree of customer loyalty according to character trait of the subjects between the introverts and the extroverts, and the subjects with high market mavens propensity were found to show high degree of customer loyalty (F=5.243, p=.006). In the differences in Word-of-Mouth effectiveness according to character trait, there were greater differences in Word-of-Mouth experiences in the extrovert subjects ($x^2$=6.738, p=.006) and the subjects with high market mavens propensity ($x^2$=17.251, p=.000). The results of this research clarifies the degree of customer loyalty according to character trait of the patients visiting dental clinics and the differentiated influences of Word-of-Mouth effectiveness, and through this, they will become basic data for presenting ways to establish strategies from the viewpoint of practical business that should be considered in establishing dental medical marketing strategies.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.21-29
• /
• 2023

In this study, the stress characteristics of temporary fixed steel rods were analyzed in the "temporary fixing system using internal prestressing tension", which is mainly applied to the construction of superstructures by FCM. It was difficult to confirm the changes in initial tensile force in this system because the steel rod was internally connected to the pier and the PSC BOX. Therefore, measurement was performed before and after the completion of each segment using an FBG sensor to measure the change in the micro length of the steel rod. The results of the analysis showed that 75% to 90% of the maximum vertical contraction of the steel rod that occurred until the completion of the cantilever segment occurred in the fixing ~ 1segment, and the maximum loss of initial prestressing force was 39%. Such excessive loss of tension force to 1 segment means that tension is needed to improve the precision of construction during the fixation, and re-tension is needed to secure stability for conduction of cantilever segments after the completion of 1segment. In the 2 ~ last segment, the stress of the steel rod decreased gradually, and in the summer, the decrease in stress tended to partially recover due to the increase in the length of the steel rod corresponding to the increase in the vertical volume of PSC BOX. The dominant factor in the stress change in 2~ last segment in this phenomenon is judged to be the change in the length of the steel rod according to the temperature. Unlike the change in length, the relaxation was 1.2-2.7%, which was mostly offset by the opposite stress corresponding to the temperature stress. Therefore, a plan was proposed to improve the internal stress, such as adjusting the fixation time.