• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.189-195
• /
• 2002

Corn starch was modified by oxidation with sodium hypochlorite (NaOCl) as an attempt to expand the application of starches in food industry. Corn starch was oxidized with 0.25, 0.5, 0.75, 1.0 and 1.5% active Cl/g starch at pH 7.0 and $25^{\circ}C$ for 10 minutes. The size, shape and amylose content of oxidized starches were similar to those of native corn starch. As the extent of oxidation increased, solubility, swelling power and the amount of soluble amylose increased, X-ray diffraction patterns changed, and relative crystallinity decreased. In Brabender amylogram, oxidation did not chance the gelatinization temperature, but oxidized starches had a lower peak in viscosity and their cooled pastes gave less setback, compared with native corn starch.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.193-213
• /
• 2020

A mathematical model to simulate more realistically the penetration of compacted bentonite buffer installed in the deposition hole into the discontinuity in the excavation damaged zone formed at the inner wall of the deposition hole in the geological repository for spent fuel is developed. In this model, the penetration of compacted bentonite is assumed to be the flow of Bingham fluid through the parallel planar rock fracture. The penetration of compacted bentonite is analyzed using the developed model. The results show that the maximum penetration depth of compacted bentonite into the rock fracture is proportioned to the swelling pressure of saturated compacted bentonite and the aperture of rock fracture. However, it is in inverse proportion to the yield strength of compacted bentonite. The viscosity of compacted bentonite dominates the penetration rate of compacted bentonite, but has no influence to the maximum penetration depth.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.764-769
• /
• 2013

Starch was grafted by poly(methyl methacrylate) through the emulsion polymerization method. Modified starch/(acrylonitrile-butadiene rubber) (NBR) compounds were prepared by a latex blend method. The morphology, thermal properties and mechanical properties of the modified starch/carbon black/NBR composites were investigated with the change of starch concentration. The mechanical properties of the composites were improved by the addition of modified starch. But, when the concentration of modified starch was higher than 40 phr, the mechanical properties were deteriorated due to the poor dispersion of modified starch. At the same ratio of starch to carbon black, the composite showed a synergistic reinforcing effect by the good dispersion and high cross-linking density. In addition, the tensile strength, storage modulus, hardness, swelling and other properties were the best.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.985-990
• /
• 2009

Fatty acid composition, protein content, and shape change of Listeria monocytogenes treated with ethanol extracts from Schizandra chinensis were examined. Transmission electron micrography of cells treated with ethanolic S. chinensis extracts showed development of morphological changes. Cell surfaces were irregular, swollen, or even disrupted after treatment with ethanol extracts, compared with the smooth surfaces of normal cells. Interestingly, cell protein content was decreased by ethanol extract treatment. Cell fatty acid composition was also changed after treatment with ethanol extracts. The levels of 13-methylpentadecanoic acid (i-15:0), 12-methylpentadecanoic acid (a-15:0) and 15-methylpentadecanoic acid (i-17:0) of L. monocytogenes Scott A and L. monocytogenes ATCC 19111 were decreased, but the concentrations of Cis-9,12 octadecanoic acid ($18:2^{9,12}$) and cis-9-octadecanoic acid ($18:1^9$) were increased. 13-methylpentadecanoic acid (i-15:0) and 12-methylpentadecanoic acid (a-15:0) levels in L. monocytogenes Brie I were decreased but the concentrations of Cis-9,12 octadecanoic acid ($18:2^{9,12}$) and cis-9-octadecanoic acid ($18:1^9$) were increased after treatment with ethanolic extracts. Notably, the levels of 12-methylpentadecanoic acid (a-15:0) significantly were decreased but those of cis-9,12 octadecanoic acid ($18:2^{9,12}$) significantly were increased in all tested microorganisms.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.79-85
• /
• 1984

The physicochemical properties of starch isolated from two kinds of waxy barley were investigated. The average diameters of starch granules of Changyoung and Smire were 13.6 and 16.6 microns, respectively, and most of starch granules were round shape. X-ray diffraction patterns of two samples were A-types and amylose contents of two waxy barley starches were 4%, blue values and alkali numbers of Changyoung and Smire were 0.22 and 0.18, 5.2 and 4.0, raising powers of them were 167 and 173, respectively. The optical transmitance of 0.1% suspension of waxy barley starches increased rapidly from $51^{\circ}C\;to\;75^{\circ}C$. Amylogram data on 5% of Changyoung and Smire starch solutions showed the gelatinization temperature of 63 and $62^{\circ}C$, maximum peak hight of 920 and 900 B.U., respectively. Waxy barley starches had higher swelling powers than non waxy barley starch. The starch pastes prepared from waxy barleys retrograded much slower than that of non waxy barley.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.395-400
• /
• 2017

Coke strength was increased by adding ash-free coal (AFC) binder. In this study, the effect of the AFC binder on the physical and chemical properties of coke was experimentally investigated to understand the molecular mechanism for the improved coke strength. For reduced $CO_2$ emission in steelmaking industry, torrefied biomass fuel mixed with coal binder is also considered. The interface between the base coal and AFC was thus examined using Scanning Electron Microscope (SEM). The coke strength was commonly measured by performing the indirect tensile test and Nuclear Magnetic Resonance (NMR) spectroscopy in $^1H$ and $^{13}C$ modes. For comprehensive mechanism study of the enhanced coke strength thus obtained, ordinary coal for thermal power plant use was carbonized with AFC for subsequent SEM examination. The NMR spectroscopy results of coke samples positively revealed that the tensile strength was proportional to the average number of aromatic rings.

• Applied Microscopy
• /
• v.38 no.3
• /
• pp.195-204
• /
• 2008

This study was intended to identify the effectiveness of Lithospermum erythrorhizon in the UVB-irradiated mouse skin. The C57BL mice were divided into three groups; the control group, the UVB irradiated group(UVB group), and the group treated with Lithospermum erythrorhizon extracts after UVB irradiation(UVB+Le group). 10 mouses were collected and sacrificed at 24 hrs, 48 hrs, 72 hrs, 120 hrs, and 168 hrs, respectively. In the result, the transepidermal water loss (TEWL) was decreased the UVB+Le group than UVB groups by time. At the 168 hrs group was significantly lower(p<0.05). In the result, the melanin value was decreased in the UVB+Le group than UVB group, but meaningless(p>0.05). In the result of erythema index, the UVB+Le group was meaningfully lower at 24 hrs, 48 hrs, and 72 hrs group than UVB group(p<0.05). In the result of scanning electron micrograph observation, the UVB+Le group was allevited swelling than UVB group at the 24 hrs, formation of the scab at the 48 hrs, regular plate shap at the 72 hrs, new keratin observated at the 120 hrs partially, and fine fiber covered epidermis surface at the 168 hrs. In the result of transmission electron micrograph observation, the UVB+Le group was facilitation of increased lamellar bodies and reformation lamellar bodies than UVB group at the all groups. Almost all the structures were recovered at the 160 hrs group. In conclusion, Lithospermum erythrorhizon extracts may recovery on the UVB-irradiated mouse skin.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.77-98
• /
• 1974

This study was carried out ill an attempt to investigate the properties and activities of sericin obtained from silk cocoon shells in silk reeling water through various instrumental analyses. In addition, the effects of the characteristics in sericin solubility on the reeling process and silk qualities were also studied on the basis of tile above conditions. The results obtained are as follows： I. The sericin properties and activities through various analytical instruments. 1. The water solubility of each amino acid such as serine, glycine. glutamic and aspartic acids against the pH modified water by using automatic amino acid analyzer, showed the lowest solubility at PH 5, but it increased according to drifting toward the alkalinity. 2. When the obtained sericin particles by water pH variation were observed with the electronic microscope, it was found for the sericin Particles to expand in the alkaline regions. 3. The IR spectrum results showed the differences among the pH modified sericin solutions at the range of 2,100cm-1 and 1.890cm-1 of wave number. 4. The existence of sericin with in silk fabrics made differences in the X-ray interference intencity, that is, the non-degummed fabrics had the interference peak at 2$\theta$=14$^{\circ}$, 17$^{\circ}$, 24$^{\circ}$, and the degummed ones had it at 2$\theta$=17$^{\circ}$, 18$^{\circ}$, 20$^{\circ}$, 23$^{\circ}$, 26$^{\circ}$. II. The results of sericin solubility for silk reeling process. 1. The sericin solubility and swelling had a tendency to increase up with high M-alkalinity and pH value of water. But in case of acidity. water hardness and concentration of ethylene glycol were high, the sericin solubility and swelling were decreased. 2. With the filature experiments, the best conditions of filature orator are summarized as fellows ; a. pH; 6.9${\pm}$0.2 d. acidity; below10ppm b. total hardness; 55：5ppm e. Fe ion; none c. M-alkalinity; 40${\pm}$10ppm

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.63-71
• /
• 2002

The authors selected the modified soil method, and then performed the geotechnical and environmental laboratory test, and evaluated whether the modified soil liner could be accepted as a barrier layer in landfill. Unlike the results of the natural soil(CL), those of the hydraulic conductivity test of stabilized soil met the standard value. According to these results, the optimal mixing ratio of a mixture(cement : bentonite : stabilizing agent) was 90 : 60 : 1 with mass ratio(kg) for 1㎥ with soil, and it was possible to use poor quality bentonite. B\circled2 because of a little difference from results with high quality bentonite. B\circled1. The Cation Exchange Capacity(CEC) of the modified soil was increased about 1.5 times compared with the natural soil; however. the change of CEC with a sort of additives was not detected. In order to observe the change of the chemical components and crystal structures, the natural and the modified soils with the sorts of additives were measured by the XRF(X-Ray Flourescence Spectrometer) and SEM, but there was no significant change. The artificial leachate with the heavy meals ($Pb^{2+}$ , $Cu^{2+}$, $Cd^{2+}$ Zn$^{2+}$ 100mg/L) was passed through the natural soil and modified soils in columns. In the natural soil, Cd$^{2+}$ and $Zn^{2+}$ were identified, simultaneously the pH of outflow was lower, and then came to the breakthrough point. The removal efficiency of the natural soil was showed in order of following : $Pb^{2+}$ ≒$Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$ On the other hand, modified soils were not showed the breakthrough condition like the result of the natural soil. The modified soil with the lower quality bentonite, B\circled2(column3) was more stable with respect to chemical attack than that with the higher bentonite, B\circled1(column2) because the change range of outflow pH in columns was less than that of outflow pH in column2. In addition, the case of adding the stabilizing agent(column4) was markedly showed the phenomena.ena.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.19-32
• /
• 2005

The exterior of Korean traditional wooden buildings have been painted with Danchung of painting method using glue and pigments. However because of losing traditional techniques and materials through the period of colonization and industrialization, many problems are occurring today. Especially after several years from painting, occurrence of scalings and flakings in painting layer is a serious problem. To improve weathering resistance of painting layer caused by stress from the difference of swelling and shrinkage between painting layer and wood plate, was examined by weathering tests. The stress is due to the hydrophilic property of wood, mechanical properties(tensile property and stress relaxation) of painting layer, and priming methods by various binders such as glue, acrylic emulsion(Primal AC-3444), acrylic resin(Paraloid B-72). Because stress relaxation of acrylic emulsion of which glasf transition temperature is below room temperature$(7^{\circ}C)$ is high, painting layers with acrylic emulsion generate no scalings and flakings and are in the most durable state in all weathering tests. Priming method which starts from low concentration to high concentration, is more effective to improve durability than other priming methods.