• Applied Biological Chemistry
• /
• v.42 no.1
• /
• pp.58-62
• /
• 1999

Method to access qualities of brown sauce and optimize its cooking conditions was studied by sensory evaluation and response surface methodology. Cooks of an hotel, sauce experts, were selected as sensory panelists, and the brown sauce cooking conditions practically used in an hotel were adopted to prepare sauce samples for the sensory test. The cooking conditions were designed with two factors, i.e., one factor of roux contents with three levels and the other factor of cooking times with three levels, which were known as most important in sauce cooking. Sensory acceptance evaluation with intensity 7 grades was applied for several sauce attributes such as color, flavour, viscosity, taste and overall. Ability of each panel to perceive the differences between the brown sauces prepared under different cooking conditions was judged, and only data of the 9 panelists proved as reliable among the 12 panelists were reflected. The acceptances by different cooking conditions were found to be in the order of 11 > 9 > 13% roux contents and 8 > 9 > 7 hr cooking times. Response surface methodology was treated with second-order model on the sensory data and the optimum cooking conditions with the highest acceptances were $10.3{\sim}10.8%$ roux content and 8 hr cooking time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3197-3202
• /
• 2013

When car builder designs the large carbody structure of railway vehicles, it is necessary to optimize the damping characteristics through the analysis of structure borne noise such as sound pressure level(SPL). This paper is a study on the structure borne noise analysis by characterizing the damping of double skin aluminum extruded panels for rolling stock carbody. The normalized SPL was calculated based on the simple source theory using measured mechanical mobility parameters from vibration tests(i.e. point, transfer and modal mobility). The reduced SPL was predicted by using finite element method by applying loss factor of damping material into laminated shell elements. It was found out that the damping material coated on the panels like underframe, which part is seriously affected by vibration during train run, took effect to reduce noise level.

• Composites Research
• /
• v.27 no.1
• /
• pp.7-13
• /
• 2014

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. For each panel, the deflection under the dead and live loads is compared, since both tensile and compressive strengths of the composites are far more higher than those of concrete. All types of sandwich panels considered, except one case, have self-weights less than one tenth of that of the reinforced concrete slab, with deflections less than that of the reinforced concrete slab.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.701-710
• /
• 2012

We present optimum design for truss and frame structures subject to constraints on stresses, displacement, and natural frequency. The optimum design procedure is used discrete and continuous design variables and Genetic Algorithms. Genetic Algorithms is used the method of Elitism and penalty parameters in order to improved fitness in the reproduction process, and optimum design is used steel(W-section) and pre-made discrete cross-section. Truss and frame structures optimization examples are used for 10-Bar truss, 25-Bar truss, 1-bay 2-story frame, 1-bay 7-story frame, and these examples are employed to demonstrate the availability and serviceability of Genetic Algorithms for solving optimum design of truss and frame.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.339.2-339.2
• /
• 2014

터치패널은 저항막 방식, 정전용량 방식, 적외선방식, Camera방식 등을 사용하고 있으며 현재 널리 상용화 되어 있는 방식은 정전용량 방식이다. 최근 터치스크린의 면적이 점점 커지게 되면서 점차 저저항, 고투과율을 가지는 IM ITO (Index matching ITO)를 요구하고 있다. 본 연구에서는 중대형 사이즈(15inch 이상)의 Cover glass 일체형 터치센서 구현을 위한 저저항(60ohm/sq이하), 고투과(88% 이상)의 IMITO Glass를 제작하여 전기적,광학적 특성을 분석하여 IMITO 성막조건을 최적화시키는 연구를 하였다. 또한 TSP의 Pattern 시인성을 향상시키기 위해 Index matching층을 고굴절재료와 저굴절 재료를 사용한 다층박막을 형성하여 반사율(0.5% 이하)을 최소화시켜 구현하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.64.1-64.1
• /
• 2011

LCD 디스플레이 등에 사용되는 글래스 패널 위에 bare si die를 직접 실장하는 COG 플립칩 패키지의 경우 Au 범프와 ITO 패드 간의 전기적 접속 및 접합부 신뢰성 확보를 위해 접속소재로서 ACF (anisotropic conductive film)가 사용되고 있다. 그러나 ACF는 고가이고 접속피치 미세화에 따라 브릿지 형상에 의한 쇼트 등의 문제가 발행할 수 있어 NCP (non-conductive paste)의 상용화가 요구되고 있다. 본 연구에서는 NCP를 적용한 COG 패키지에 있어서 온도, 압력 등의 열압착 본딩 조건과 NCP 물성이 Au-ITO 접합부의 전기적 및 기계적 특성에 미치는 영향을 조사하였다. NCP는 에폭시 레진과 경화제, 촉매제를 사용하여 다양하게 포뮬레이션을 하였고 DSC (Differential Scanning Calorimeter), TGA (Thermogravimetric Analysis), DEA (Dielectric Analysis) 등의 열분석장비를 이용하여 NCP의 물성과 경화 거동을 확인하였다. 테스트 베드는 면적 $5.2{\times}7.2\;mm^2$, 두께 650 ${\mu}m$, 접속피치 200 ${\mu}m$의 Au범프가 형성된 플립칩 실리콘 다이와 접속패드가 ITO로 finish된 글래스 기판을 사용하였다. 글래스 기판과 실리콘 칩은 본딩 전 PVA Tepla사의 Microwave 플라즈마 장비로 Ar, $O_2$ 플라즈마 처리를 하였으며, Panasonic FCB-3 플립칩 본더를 사용하여 본딩하였다. 본딩 후 접합면의 보이드를 평가하고 die 전단강도로 접합강도를 측정하였다.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.64-86
• /
• 2015

The objective of this study is to develop NCS-based vocational curriculum procedures developing models recognized by experts in the National Skill Standards and to verify them. As for a research method for efficiently achieving this study, Delphi research has been conducted three times based on the result of preliminary Delphi investigation, contents of in-depth interview (review and advice), and consideration of previous studies and literature research related to NCS in Korea and abroad. Major results of study in regard of validation of NCS-based vocational curriculum procedures developing models recognized by experts of National Skill Standards are as follows. First, validity of conceptual model(plan) of NCS-based vocational curriculum developing procedures was verified. According to the result of implementing it on 10 members of verification for Delphi preliminary investigation tools, the average was higher than 4.70, and validity of contents was turned out to be outstanding in 1.00. Secondly, validity of conceptual model(plan) of NCS-based vocational curriculum developing procedures was verified by using Delphi preliminary investigation tools. According to the result of verifying it in order on 10 members of verification for Delphi preliminary investigation tools, validity of contents on questions in each area from the development procedures model(plan) was all 1.00, and appropriateness of contents on the components was turned out to be outstanding in 1.00. In addition, validity of contents on interrelation and comprehensiveness of components in the development procedures model(plan) was all turned out to be very satisfying in 1.00. Third, Delphi investigation was implemented in three rounds on 26 Delphi panel members for the verification. As a result consistency rate of interrelation and comprehensiveness among questions in each area of development procedures model(plan), components on the contents, and elements was turned out to be outstanding in .75 from all of three rounds. Here, consistency rate from all three rounds was turned out to be 1.00, and convergence rate was shown to be .00 that very well satisfied the conditions(except for 1 question out of 29). Therefore, it was confirmed that opinion from Delphi panel members was completely consistent in the third round of Delphi investigation research. Such a result in the study was from how Delphi selection criteria were strictly reinforced, and, at the same time, implies how will of participation of Delphi panel members was important.

• 한국사회정책
• /
• v.23 no.1
• /
• pp.95-123
• /
• 2016

As Korean society grows rapidly older, a systematic analysis of the determinants of labor supply behavior among the elderly becomes a prerequisite for designing more effective senior employment policies and income security regime for the elderly. Literatures review shows that a majority of previous researches have been ignoring the problem of "endogenous predictor" especially when it comes to the estimation of the effects of the two key variables, education and non-labor income, on labor supply decisions among older people. They have failed to take into consideration the unobserved heterogeneities which might affect both labor supply decisions of the elderly and their levels of education and non-labor income, which means, according to some econometric literatures, that the estimated coefficients of the two predictors can be inconsistent. The paper tries to redress the endogeneity problem by employing a panel logit model with data from the 1st. to 4th. wave of the KLoSA(Korean Longitudinal Survey of Ageing) to estimate the effects of key predictors on the probability of getting jobs among older people(ages of 60 or older). Both a random effects and a fixed effects model reaffirms that non-labor income has a negative effect on the chances of being employed. And a random effects model shows that the effect of education is also negative, as has frequently been reported by previous studies. That means the effects of education and non-labor income on elderly employment remain negative after the effect of unobserved heterogeneities is controled for and the problem of endogenous predictors is redressed through an appropriate panel data analysis. These findings mean, in turn, that when Korean baby-boomers, who had acquired an unprecedentedly higher level of education and were expected to enjoy ever-larger amount of non-labor income than their preceding generations, retires in near future, their incentives to work will become much weaker and the lack of labor-force and the burden of financing increased public pension expenditure will become more troublesome. The paper concludes with recommending some policy initiatives helpful to solve these expected problems.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.108-115
• /
• 2020

In this study, the flexural performance of Highly Ductile Cement Composites(HDCC) mimicking boundary conditions of shellfish skin layer was evaluated. To improve ductility by mimicking the boundary skin layer structure of shellfish, the method of stratification by charging between precast panels using HDCC and the method of distributing PE-mesh to the interface surface were applied. Evaluation of flexural performance of layered cement composite materials mimicking boundary conditions of shellfish skin layer resulted in increased ductility of all test specimens applied with stratified cross-section compared to typical bending test specimens. The layered method by inserting PE-mesh showed excellent ductility. This is most likely because the inserted PE-mesh made an interface for separating the layers while the HDCC pillars in the PE-mesh gave adhesion between layers.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.469-478
• /
• 2010

Fire resistance of new hybrid timber framed wall systems was evaluated in this study. These wall systems are composed of two major structural parts. One part is a heavy timber frame part designed to take charge of whole vertical load using heavy timber post and beam, and the other is an infill wall structure, designed to take charge of whole horizontal load and to provide an established level of fire resistance. A basic concept of this hybrid wall is adopted from a typical furniture structure with frame. A timber post and beam frame is constructed with Japanese Larch solid timber post(180mm by 180mm) and beam(180mm by 240mm). As infill wall systems, two types of walls are applied. One is a typical light timber framed wall with solid blocking and another is a structural insulated panel wall, in which polystyrene insulation is filled between two structural panels to make single structure. For all tested walls, two layers of 12.5mm thick type-X gypsum boards are used on fire exposed side. Prior to tests for hybrid walls, only infill walls are tested without heavy timber frame. All fire resistance tests are carried out in accordance with KS F 2257, and temperatures on several points within wall structure and unexposed wall surface are measured during fire tests. It is considered that the reinforcement of heavy timber frame is significantly efficient for improving the fire resistance of timber framed walls.