• CDE review
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2015

본 글을 통해 학생들과 함께 수행한 다양한 디지털 디자인 모델을 기반으로 5가지의 디지털 패브리케이션 방식을 적용하여 여러 실제 인테리어패널의 제작 과정 및 그 결과물들을 요약적으로 소개하였다. 해당 과정은 기존의 분리된 설계와 제작 및 시공이 아닌, 설계-제작 통합적인 접근방법을 활용함으로써 학생들로 하여금 디지털 디자인과 패브리케이션의 효과를 극대화 할 수 있음을 체득하도록 하였다. 패브리케이션 기기 및 재료 등의 차이점에 따라 실제 구현된 모델과 원래의 디지털 모델과의 형상적인 차이점은 아직까지 한계점으로 남을 수 있지만, 비정형적으로 생성된 디지털 디자인의 형상이 직접적으로 실현이 가능하다는 점에서 의의가 있다고 할 수 있다. 또한 패러매트릭 모델링 기법이나 실제 제작 경험이 거의 없는 학생들을 대상으로 개별적인 교육이 아닌 설계-제작 통합적인 교육을 실시함으로써 각 요소들이 어떻게 유기적으로 관련되어 디지털 디자인 과정이나 패브리케이션과정에서 상호 보완적으로 중요한지 직접 체득할 수 있도록 하였다는데 의의가 있다. 본 글에서 소개한 재료를 깎는 등의 방식인 "마이너스"의 방식이 아닌 3D프린팅과 같이 재료를 이용해 만들어가는 "플러스"적인 방식 또한 해당 사례에서 수행되었으며 마찬가지로 다양한 특성을 지니고 있으나, 본 글에서는 전자의 방식에 대해 주로 논하였다. 본 글에서 다룬 제작기법뿐만 아니라 3D프린팅 기술의 발전과 보급에 따라 디지털 패브리케이션 역시 다양하게 진보하고 있으며, 팹랩 등을 통한 학교에서의 건축설계 교육도 다양하게 진화하고 있다. 본 사례 및 기타 실험적인 교육과 선도적인 여러 시도를 통해서, 디지털 디자인과 패브리케이션 영역을 확장시켜나가고 해당 기술의 발전에 적극적으로 보조할 수 있는 교육과정을 수립하고 이행하는데 일조 할 수 있기를 희망한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.153-155
• /
• 2011

In this study, an insulation panel system that has the most excellent economic feasibility in a long term LCC viewpoint in some analysis, which determine a proper insulation panel construction method for the out wall of structures, is analyzed. As a result, in the case of a deterministic LCC analysis, the initial investment cost represents about 80,000Won/㎡ for extrusion ceramic panels. Also, although the costs of maintenance, disassembling, and disposal show no large differences compared with other panel systems, metal panels indicate a bit higher than other panel systems about 1.5 times. In the probability density function that analyzes the variation of the probabilistic cost between panel systems and its economic feasibility, metal panels show the highest cost distribution and extrusion and stone panels represent low cost distributions. In the cumulative function distribution that composites probability density functions, the extrusion ceramic panel represents the most excellent economic feasibility and reliability and that is also the most superior subject among the subjects used in this study.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.660-663
• /
• 2011

폭발하중은 매우 짧은 시간 내에 순간적인 높은 압력으로 발생된다. 따라서 폭발하중을 받는 구조물은 매우 복잡한 순간 동역학적 손상 거동을 나타낸다. 이러한 외부 하중에 대한 실험적 연구는 큰 비용, 시설, 그리고 군사적 보안 문제가 요구되기 때문에, 고성능 컴퓨팅 기술을 이용한 수치적 기법을 통해 구조물의 동적 비선형 해석을 수행하였다. 수치해석의 정확성을 높이기 위해 폭풍파와 같은 대기전파의 경우 Euler 기법, 콘크리트 재료의 경우 Lagrange 기법을 적용한 복합적 수치해석 (multi-solver coupling) 기법이 적용되었다. 제안된 수치해석 기법은 explicit 유한요소해석 프로그램인 AUTODYN을 이용하여 수행되었다. 그리고 클러스터 (cluster) 내 병렬 알고리즘 (parallel algorithm)을 이용하여 수치해석의 효율성을 높였다. RC 구조물의 수치해석 결과, 기존 실험 결과와 비교하여 잘 일치되었다. 또한 영역분할 개수가 증가할수록 수행시간은 감소되었고 Speed-up과 효율성은 높아졌다.

• The Korean Journal of Applied Statistics
• /
• v.30 no.3
• /
• pp.377-390
• /
• 2017

When conducting a survey, item nonresponse occurs if the respondent does not respond to some items. Since analysis based only on completely observed data may cause biased results, imputation is often conducted to analyze data in its complete form. The panel study is a survey method that examines changes of responses over time. In panel studies, there has been a preference for using information from response values of previous waves when the imputation of item nonresponses is performed; however, limited research has been conducted to support this preference. Therefore, this study compares the performance of imputation methods according to whether or not information from previous waves is utilized in the panel study. Among imputation methods that utilize information from previous responses, we consider ratio imputation, imputation based on the linear mixed model, and imputation based on the Bayesian linear mixed model approach. We compare the results from these methods against the results of methods that do not use information from previous responses, such as mean imputation and hot deck imputation. Simulation results show that imputation based on the Bayesian linear mixed model performs best and yields small biases and high coverage rates of the 95% confidence interval even at higher nonresponse rates.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.375-380
• /
• 2007

The nonlinear aerodynamic analysis of wing with control surface is performed using the frequency-domain panel method. To take into consideration the nonlinear aerodynamic characteristics of wing an iterative decambering approach is introduced. The iterative decambering approach uses the known aerodynamic characteristics of airfoil to calculate the aerodynamic characteristics of wing. The multi-dimensional Newton iteration is used to account for the coupling between the different sections of wing. The present method is verified by showing that it produces results that are in good agreement with experiments. The present method will be useful for the analysis of aircraft in the conceptual design because the present method can calculate promptly the nonlinear aerodynamic characteristics of wing with a few computing resources.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.48-56
• /
• 2013

In this paper, the equivalent elastic properties of fiber reinforced plastic laminar are investigated using various homogenization schemes. Although there are several methods for predicting the equivalent elastic properties such as analytical formula or semi-empirical formula, most of them have some limitations or are not much accurate when handling new composite material consisting of various fiber, matrix and fiber-volume fraction ratio. To resolve the issues, computational homogenization scheme is adopted with a representative volume element (RVE) comprised of a set of finite elements. Finally, the equivalent elastic properties are obtained by applying periodic boundary conditions. The obtained results are compared with those by the existing methods and test results. Also its effect on structural analysis results of the composite satellite panel is investigated.

• Korean Business Review
• /
• v.15
• /
• pp.79-97
• /
• 2002

In this study, an analytical CRM for customer segmentation is exercised by integrating and analyzing the customer profile data and the access data to a particular web site. We believe that effective customer segmentation will be possible with a basis of the understanding of customer characteristics as well as behavior on the web. One of the critical tasks in the web data-mining is concerned with both 'how to collect the data from the web in an efficient manner?' and 'how to integrate the data(mostly in a variety of types) effectively for the analysis?' This study proposes a panel approach as an efficient data collection method in the web. For the customer data analysis, OLAF and a tree-structured algorithm are applied in this study. The results of the analysis with both techniques are compared, confirming the previous work which the two techniques are inter-complementary.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.479-485
• /
• 2016

The objective of this study was to explore the current market of instant mulnaengmyeon broths by understanding product perceptions, using the sorting task followed by a description task. Fourteen instant mulnaengmyeon broths that were available in the market were used in the study. The sorting task was performed by 29 subjects, with some of them having prior experience as trained descriptive panelists. The results of this study showed that unless the sample had a very distinctive ingredient in its broth, commercially available mulnaengmyeon broths were mainly divided into products that are likely to be familiar to public versus products that are less exposed. In addition, concentrated broths were shown to possess characteristics that were different from those of other samples. The inclusion of subjects who had experience as trained panelists allowed to partially overcome the problem of validity of the terms derived from naive consumers.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1590-1597
• /
• 1994

The aerodynamic analysis of a $6{\times}6$ counter-rotating propfan around a missile-like-body has been completed analytically using a frequency domain panel method. The present method requires Fourier transformation of flow field around the propfan in computing the velocities normal to the propfan lifting surfaces. The aerodynamic performance curve is determined by angle of attack and nonuniform inflow conditions. The inflow conditions result from the variations of missile flight speed, angle of attack, propfan location relative to control surfaces and control surface deflection angle. The two cases of propfan location relative to control surface, front and behind, are analyzed and the aerodynamic results are presented.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.71-76
• /
• 2003

Optimal design of panel with trapezoidal type stiffeners was studied using linear and nonlinear deformation theories. Also analysis method was using closed-form analysis and finite difference energy methods, respectively. Various bucking load factors are obatined for stiffened laminated composite panel with trapezoidal type stiffeners and various aspect ratios, which are made from Carbon/Epoxy USN 125 prepreg and are simply-supported on four edges under uniaxial compression. Optimal design analyses are carried out by the nonlinear search optimizer, ADS.