• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1271-1283
• /
• 2007

To detect defect of FPD(flat panel displays) is very difficult due to uneven illumination on FPD panel image. This paper presents a method to detect various types of defects using the approximated image of the uneven illumination by B-spline. To construct a approximated surface, corresponding to uneven illumination background intensity, while reducing random noises and small defect signal, only the lowest smooth subband is used by wavelet decomposition, resulting in reducing the computation time of taking B-spline approximation and enhancing detection accuracy. The approximated image in lowest LL subband is expanded as the same size as original one by wavelet reconstruction, and the difference between original image and reconstructed one becomes a flat image of compensating the uneven illumination background. A simple binary thresholding is then used to separate the defective regions from the subtracted image. Finally, blob analysis as post-processing is carried out to get rid of false defects. For applying in-line system, the wavelet transform by lifting based fast algorithm is implemented to deal with a huge size data such as film and the processing time is highly reduced.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.51-59
• /
• 2012

Through this research safety factors were analyzed for concrete precast panels in road pavement which happens in lifting, moving, and installing. Two half size of full-scale precast concrete panels were made while one full-scale precast concrete panel was made. A series of strain gages for concrete and steel were installed and measured in lifting and transporting. Measurement results indicate that in case of 60 degree of lifting, small scale panel in dynamic motion produces about 3.54 times of strain compared to the static condition. However strain measurement of full-scale concrete panel in lifting and transportation does not yield any big difference compared to the small scale panels in the static condition. From this experimental results safety of the full-scale concrete panel was attained for the lifting system adopted in this research.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.197-204
• /
• 2006

Recently, in order to realization of construction and economical saving, various studies are progressing. Also, the study on RCS system which is consisted of reinforced concrete column and steel beam is progressing actively. Actually, however, resisting mechanism of panel zone is influenced by transverse beams when the stress transfers inner panel to outer panel but existing literature didn't reflect the effect of transverse beams. This paper is to analyze the test result of five inner beam-column joints specimen with a variable such as web, flange thickness of transverse beam and face bearing plate(FBP) for RCS systems were tested under cyclic loadings conforming to NEHRP recommendation to investigate the effect of transverse beams and the structural performance of beam-column joints. From the test result, it was shown that transverse beams are effective to enhance the shear strength and structural performance of beam-column joints.

• Survey Research
• /
• v.10 no.1
• /
• pp.155-168
• /
• 2009

As an efficient sampling design, stratified random sampling is often used when auxiliary information is available at the designing stage. Although one - per - stratum design is an efficient design that can be used when many auxiliary variables are available, it does not provide any unbiased variance estimator. With a two - per - stratum sample in which two elements are selected from each stratum, it is possible to obtain an unbiased variance estimator. However the loss of efficiency could be significant if any important stratification variable is missed. In this study, we investigated a sampling design that uses the all given auxiliary information and also permits an unbiased variance estimator suggested by Park and Fuller(2008). Through a simulation study, we compared several stratified random sampling and systematic sampling design. We also applied the proposed stratified sampling designs to 2007 youth panel data.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.165-173
• /
• 2021

Anti-glare (AG) coating films are applied to various display fields such as liquid crystal displays, LED lighting, and touch panels. In this study, micrometer-sized silica particles were added as fillers in the UV-curable coating solutions to provide anti-glare effect. During this process, the effects of the particle size, content, stirring time, and mixing ratio of silica particles of different sizes were investigated on the haze values and visible light transmittance of the coating films. As a result, as the size of the silica particles increased and the content of the silica particles increased, the haze values increased, but the visible light transmittance decreased. On the other hand, the stirring time did not significantly affect the haze value and transmittance of coating films. In addition, as the mixing ratio of large-sized silica particles increased, the haze value increased, but on the contrary, the visible light transmittance decreased.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.252-260
• /
• 2015

The aim of this research is providing the fundamental data for treating and recycling the byproducts by using the wet processed bottom ash as a fine aggregate replacement for cement-based extruded panel. Although the cement-based extruded panel was used mainly as a cladding component with its high strength and outstanding durability, it was hardly spread because of low economic feasibility due to the high cost of additives or fibers which were used to achieve 14 MPa of flexural strength as a cladding material. As a solution of this drawback, by the previous research, it was possible to replace cement by fly ash up to 80 % by decreasing quality criteria with restricting the application to indoor purpose. In this research, based on the previous research, by using the bottom ash as a replacement of fly ash, improvement of shape retention performance is tried. As a result of the experiment on evaluating the optimum content and PSD of bottom ash, as the fineness modulus and content of bottom ash was increased, the extruding performance was decreased and penetration resistance was increased. Additionally, the optimum content and the maximum particle size was found as 20 %, and 0.3 mm, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.485-496
• /
• 2019

The current study examined the latent mean analysis and path analysis comparison between male and female groups in the structural relationships among parent-child conversation, peer attachment, satisfaction in teacher at a community child care center, ego-resiliency, self-esteem, and career identity in adolescents who attend a community child care center. For this purpose, 438 adolescents who participated in the 4th(2017) questionnaire in the 2nd child panel of the community child care center were used. From the analysis results, first, peer attachment and satisfaction in teacher at a community child care center increased ego-resiliency and career identity, but parent-child conversation did not predict ego-resiliency and career identity. Peer attachment and satisfaction in teacher at a community child care center was fully mediated by ego-resiliency and self-esteem to career identity. Second, in the latent mean analysis, male students showed significantly higher latent mean values in ego-resiliency and self-esteem than female students, while female students showed significantly higher latent mean values in parent-child conversation than male students. Third, multi-group analysis revealed different paths to career identity between the genders. Peer attachment can buffer the effect of ego-resiliency and self-esteem on career identity of male students, but satisfaction in teacher at a community child care center buffers more on the ego-resiliency of female students. The results of this study suggest that social support for enhancing ego-resiliency and self-esteem is needed to encourage career identity, and that gender needs to be considered.

• Economic Analysis
• /
• v.25 no.2
• /
• pp.96-131
• /
• 2019

Initially entering into the job market during hard times with unfavorable market institutions has a persistent, negative effect on young workers' subsequent employment. This paper analyzes hysteresis in youth unemployment by using a composite fixed-effect panel data model. Data sets for the age-cohort unemployment rate and for labor market institutions are constructed from OECD statistics from 21 advanced economies, including Korea, from 1985 to 2017, and are then readjusted to match with the peculiarities of the Korean market. In Korea, with a less-aggressive stance on active labor market policy spending, a male worker who experiences a one percentage point higher youth unemployment rate when he was 20- to 29-years-old has a 0.146 percentage point higher unemployment rate at the ages of 30-to 34-years-old and a 0.035 percentage point higher unemployment rate at the age of 35- to 39-years-old. These figures are larger than those in most countries that have more aggressive spending schemes. These findings point out that hysteresis in the Korean labor market can be mitigated by expanding active labor market policy spending more aggressively and more effectively.

• Communications for Statistical Applications and Methods
• /
• v.17 no.4
• /
• pp.515-525
• /
• 2010

We investigated design-based properties of the ordinary least square estimator(OLSE) and the weighted least square estimator(WLSE) in a panel regression model. Given a complex data we derive the magnitude of the design-based bias of two estimators and show that the bias of WLSE is smaller than that of OLSE. We also conducted a simulation study using Korean welfare panel data in order to compare design-based properties of two estimators numerically. In the study we found the followings. First, the relative bias of OLSE is nearly two times larger than that of WLSE and the bias ratio of OLSE is greater than that of WLSE. Also the relative bias of OLSE remains steady but that of WLSE becomes smaller as the sample size increases. Next, both the variance and mean square error(MSE) of two estimators decrease when the sample size increases. Also there is a tendency that the proportion of squared bias in MSE of OLSE increases as the sample size increase, but that of WLSE decreases. Finally, the variance of OLSE is smaller than that of WLSE in almost all cases and the MSE of OLSE is smaller in many cases. However, the number of cases of larger MSE of OLSE increases when the sample size increases.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.401-412
• /
• 2020

This study analyzed the causes of warehouse fires using a creative problem-solving technique called TRIZ. It identified preventive measures by applying 4M. The results are as follows. First, this study examined the inconsistency among the causes of warehouse fires using TRIZ. Second, it analyzed human factors and fire prevention measures in warehouses such as safety standards for managers, and methods for the promotion of safety consciousness among workers, and for the reinforcement of construction technology for sandwich panel workers. Third, it identified the mechanical and facility factors and fire prevention measures in warehouses such as safety facilities, the expanded installation of safety devices, the adoption and development of fire suppression equipment, and the deployment of methods to improve the fire resistance of sandwich panels. Fourth, it presented working and environmental factors and fire prevention measures in warehouses such as the tightening of safety precautions and the supervision of working methods, and setting fire partitions both in loading places and based on performance-based design. Finally, it proposed managerial factors and fire prevention measures in warehouses such as specific targeting for firefighting with low fire hazards, reviewing the material quality regulations of non-combustible or higher for sandwich panels in the specific target of firefighting that cannot apply fire safety standards, installing sprinklers in cold storage, and mandating the installation of automated facilities with retroactive application regardless of the floor area in the warehouse with a sandwich panel structure.