• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.424-430
• /
• 1990

The variation of needle, cone and seed characteristics and of allelic frequency in isoenzyme, ADH, ME and PGI, according to different resin duct index in Pinus densiflora, Pinus thunbergii and their hybrids was analyzed. The results obtained were as follows : 1. With increase of number of resin ducts, morphological characteristics such as needle length, needle sheath length, cone size, seed size, seed wing size, 1000 seeds weight, etc. tended to he increased, while number of stomata row in needle to be decreased. 2. As the results of discriminant analysis for the morphological characteristics of needle, cone and seed, most individuals are generally coincided with number of resin duct mostly in Pinus densiflora were not. 3. According to the canonical discriminant function obtained from the morphological characteristics in Pinus densiflora, Pinus thunbergii and their hybrids including introgressive hybrid, the resin duct index, 1000 seeds weight, cone size and neelde sheath length characterized fairly their species. 4. With increase of resin duct index, hybrid index tended to be higher. The results obtained from the discriminant analysis and the hybrid index were nearly same each other. 5. With increase of number of resin duct, the allelic frequencies for isoenzyme, ADH-$B_2$, ME-$A_2$ and PGI-$B_1$. $B_2$ tended to increase but those of ADH-$B_3$, ME-$A_4$, and PGI-$B_3$, to decrease. It is thought that this increase of frequency for the former four isoenzymes was resulted in introgressive gene flow from Pinus thunbergii to Pines densiflora and accordingly the frequency of latter three isoenzymes tended to decrease.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.51-59
• /
• 2010

We developed an analysis software that automatically detects incoming isotopes for multi-purpose gamma-ray detectors. The software is divided into three major parts; Network Interface Module (NIM), Spectrum Analysis Module (SAM), and Graphic User Interface Module (GUIM). The main part is SAM that extracts peak information of energy spectrum from the collected data through network and identifies the isotopes by comparing the peaks with pre-calibrated libraries. The proposed peak detection algorithm was utilized to construct libraries of standard isotopes with two peaks and to identify the unknown isotope with the constructed libraries. We tested the software by using GammaPro1410 detector developed by NuCare Medical Systems. The results showed that NIM performed 200K counts per seconds and the most isotopes tested were correctly recognized within 1% error range when only a single unknown isotope was used for detection test. The software is expected to be used for radiation monitoring in various applications such as hospitals, power plants, and research facilities etc.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.699-704
• /
• 2010

Rapeseed oil was stored under different conditions such as in the dark, with UV treatment, and with prooxidantscytochrome C and copper ion. The rapeseed oils stored at different temperatures were analyzed by a mass spectrometrybased electronic nose and discriminant function analysis (DFA). Volatile components in the rapeseed oil increased with storage time, and the discriminant function first score (DF1) moved from a positive position to a negative position as storage time increased. Changes in DF1 were higher under UV treatment than under the dark condition (DF1: $r^2$=0.9481, F=307.03). The different DF1 values (F1) under the dark condition were 0.099, 0.187, and 0.278 as storage temperature increased. The different values under UV treatment were 0.554, 0.588, and 0.542, as storage temperature increased from 4 to $26^{\circ}C$. As concentrations of prooxidants copper ion and cytochrome C increased, amounts of volatile components also increased. These were confirmed by DFA. Furthermore, changes in responses at each ion fragment agreed with reported results for GC/MS, which formed after rancidity of the oil, including pentane, pentanal, 1-pentanol, hexanal, n-octane, 2-hexenal, heptanal, 2-heptenal, decane, 2-octenal, undecane, and dodecane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.380-388
• /
• 2005

This paper presents analysis results of the effects of RF filter characteristics on the system performance of impulse radio. The impulse radio system transmits modulated pulses having very short time duration and information can be extracted in receiver side based on cross-correlation between received and transmitted pulses. Accordingly, the pulse distortion due to in-band group delay variation can cause serious system performance degradation. In general, RF bandpass filters inevitably cause group delay difference to the signal passing through the filter which is proportional to its skirt characteristic due to its resonance phenomenon. For time as well as frequency domain analysis, small signal scattering parameter $S_{21}$ and its Fourier transform are used to characterize output pulse waveform under the condition that the input and output ports are matched. The output pulse waveform of the filter is predicted based on convolution integral between input pulse and filter transfer function, and resulting BER performances in the BPM and PPM based impulse radio system are calculated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.57-65
• /
• 2010

In this paper, we present a universal steganalysis scheme. The proposed method extract features of two types. First feature set is extracted from histogram characteristic of the wavelet subbands. Second feature set is determined by statistical moments of wavelet characteristic functions. 3-level wavelet decomposition is performed for stego image and cover image using the Haar wavelet basis. We extract one features from 9 high frequency subbands of 12 subbands. The number of second features is 39. We use total 48 features for steganalysis. Multi layer perceptron(MLP) is applied as classifier to distinguish between cover images and stego images. To evaluate the proposed steganalysis method, we use the CorelDraw image database. We test the performance of our proposed steganalysis method over LSB method, spread spectrum data hiding method, blind spread spectrum data hiding method and F5 data hiding method. The proposed method outperforms the previous methods in sensitivity, specificity, error rate and area under ROC curve, etc.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.596-602
• /
• 2011

The objective of this study was to analyze the pattern recognition of volatile compounds from different types of milk under LED (Light Emitting Dioxide) irradiation for 6 d. Yellow, red, blue, dark, and fluorescent light were produced using LED equipment. A mass spectrometry-based electronic nose and DFA (discriminant function analysis) were used to determine the change in volatiles from different types of milk under LED irradiation. As the LED exposure time was increased, DF1 of whole milk changed considerably under blue light, while that of skim milk changed significantly under red and yellow light irradiation. Among the types of milk tested, the most light-induced oxidation sample was LTLT milk under blue light. The volatile compounds that were shown to increase due to LED treatment in the electronic nose analysis, which was based on MS, were mainly acetaldehyde, propanal, pentanal, hexanal, heptanal, nonanal, 3-methyl butanal, 2-methyl propanal, 2-butanone, 2-pentanone, 2-hexanone, and 2-heptanaone and 2-nonanone.

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.291-302
• /
• 2011

The effects of roasting condition and storage time on rancidity of rapeseed oil were studied. Rapeseed oil from rapeseed roasted under different conditions were stored in the dark at $17^{\circ}C$. Volatile compounds of rapeseed oil were analyzed with an electronic nose (E-nose) and gas chromatography-mass spectrometry (GC-MS). The data from the E-nose were analyzed using discriminant function analysis (DFA). As roasting temperature increased from 150 to $240^{\circ}C$ over 20 min, the first discriminant function score (DF1) moved from positive to negative. DF1 decreased with storage time and changes in DF1 were higher between 0 and 2 days and between 20 and 24 days. Twenty-four compounds were identified in rapeseed oil, and hydrocarbons, furans, ketones, acids, benzene, and aldehydes were detected by GC-MS. The number of formed volatile compounds increased as storage time increased, but no increase in these compounds was detected by GC-MS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.173-181
• /
• 2007

A three-dimensional ecological model (EMT-3D) was applied to Tokyo Bay for the simulation of PFOA. EMT-3D was calibrated with seawater analysis data obtained from the study area in 2004. The simulated results of dissolved PFOA were in good agreement with the observed values, with a correlation coefficient(R) of 0.7115${\sim}$0.8759 and a coefficient of determination $(R^2)$ of 0.5062${\sim}$0.7672. The results of sensitivity analysis showed that partition rate, adsorption rate and settling rate were important factors for PFOA in particulate organic matter. In the case of PFOA in phytoplankton, bioconcentration factor, uptake rate and partition rate were important factors. Therefore, the parameters must be carefully considered in the modeling. In the case of 50% and 80% total loads reduction, concentration of dissolved PFOA was shown to be lower than 20ng/L and 10ng/L, respectively. In the case of reduction of loads from rivers in each prefecture, Tokyo prefecture was found to have the most influence on the change of dissolved PFOA in surface water while Chiba prefecture was found to have the most influnce on the change of dissolved PFOA in bottom water.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.87-96
• /
• 2009

In conventional method, flight model is discribed to differential equation by linealization of nonlinear object motion equation. As state equation from differential equation of moving object, the controller is designed by transfer functions of each module under discrimination of stability criteria. But this conventional method is designed under limitation of nonlinearity from object's shape and speed. In other word, The greater part of guidance/navigation system was satisfied with the result of good performance for normal figure of flight object, not sudden changed flight condition, not high speed. But it is not able to give full play to its ability on flight object which has abnormal figure, sudden changeable motion, high speed. Therefore, in this paper was presented performance analysis of load control model for navigation/guidance system on flying object being uncertainty, non-linear like abnormal figure, sudden changeable motion, high speed and is presented method of trajectory control(controllability) ahead of controllability and stability to achieve flight mission. In other word, this paper shows the first step of Min-design method and flight control model.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.222-235
• /
• 1997

On the basis of the seven species of fish caught by fishing boats with one crewmen belonging to the Iwawada Fisheries Cooperative of Chiba Prefecture, the fishing boats were classified by species with high market values, and the results obtained were reclassified by discriminant function. As a result, the fishing boats were classified into six groups. These six groups are : G1 featuring the main catches of yellowtails ; G2 flounders ; G3 skipjack tunas, G4 squids ; G5 demersal fish, and G6 other miscellaneous species. Furthermore, principal component analysis were carried out on fish catches of the seven species in terms of the value obtained from a catch from the scores of the first, second, third and fourth principal components. The results of analysis show that fishing boats with one crewman can be broadly classified into three groups ; i.e., Groups G1/G2, Groups G3/G4/G5 and Group G6.