• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.85-95
• /
• 1996

The purpose of this paper Is to propose a dubbed signal time-synchroniztion technique based on the SOLA(Synchronized Over-Lap and Add) method which has been widely used to modify the time scale of speech signal. In broadcasting audio recording environments, the high degree of background noise requires dubbing process. Since the time difference between the original and the dubbed signal ranges about 200mili seconds, process is required to make the dubbed signal synchronize to the corresponding image. The proposed method finds he starting point of the dubbing signal using the short-time energy of the two signals. Thereafter, LPC cepstrum analysis and DTW(Dynamic Time Warping) process are applied to synchronize phoneme positions of the two signals. After determining the matched point by the minimum mean square error between orignal and dubbed LPC cepstrums, the SOLA method is applied to the dubbed signal, to maintain the consistency of the corresponding phase. Effectiveness of proposed method is verified by comparing the waveforms and the spectrograms of the original and the time synchronized dubbing signal.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.60-67
• /
• 2007

In this paper, a simulation method of the internal winding fault is proposed to calculate winding current and electromagnetic force in a distribution power transformer by suing FEM program. The model of the transformer is a single phase, 60[Hz], 1[MVA], 22.9[kV]/220[V], cable-type winding. The short-circuit current and electromagnetic force are calculated by FEM(Finite Element Method) program(Flux2D) and the results we verified with theoretical formula and PSPICE program. The simulation results are fairly good agreement with the other verified methods within 5[%] error rate. The turn-to-turn short-circuit current is 500 times of the rated current and the electromagnetic force is about $20{\sim}200times$. The method presented in this study may serve as one of the useful tools in the electromagnetic force analysis of the transformer winding behavior under the short circuit condition for design of the structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2381-2387
• /
• 2013

This paper deals with an optimal angle error reduction method of magnetic hall sensor using hall effect elements with yoke. The magnetic position sensor is required to generate ideal sine and cosine waveforms from its hall effect elements according to rotation angle for precise angle information. However, the output signals are easy to include harmonics due to uneven magnetic field distribution from disturbance in the vicinity of hall effect elements. Thus, The paper studies a way which makes sine and cosine waveforms robust in disturbance and reduces harmonics by installing a yoke around Hall effect elements. The angle detection simulation for the magnetic hall sensor is performed by 3 dimensional finite element method and Taguchi method, one of the design of experiments. For the Taguchi method, three design parameters related to position of hall effect elements and shape of hall effect element yoke are selected.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.41-50
• /
• 1993

This paper describes an effort to develop a microcomputer-based parameter identification system for three phase and two phase brushless DC motor. Back EMF equation is derived from back EMF waveform of three phase and two phase brushless DC motor. In this paper, a new identification algorithm for the brushless DC motor parameters by Pasek's technique is developed. It is found that Pasek's equation is valid for the brushless DC motor, too. The results obtained clearly shows that it is possible to implement the identification system for the determination of the brushless DC motor parameters. To minimize errors due to the ripple component in the measured armature current, digital averaging firis employed. The whole identification process of signal generation, measuring, parameter determination is fully automated. The use of the propod method in the parameter identifition system shows that the averaged current curve is in excellent agreement with the estimated current curve. Therefore, this close agreement confirms the validity of this technique.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.57-57
• /
• 2011

지진해일은 진행속도가 빠르고 파장이 길며 파형의 변화 없이 먼 거리를 진행 할 수 있어 주변지역은 물론 멀리 떨어진 지역에도 심한 범람피해를 야기시킨다. 지진해일의 일반적인 특징으로 장파와 단파가 합성되어 있고 먼 거리를 전파할 경우 분산효과의 역할이 중요하게 된다. 특히 우리나라의 동해안에 영향을 주는 지진해일은 단주기파 성분이 강하고 파장에 비해 먼 거리를 전파하기에 분산을 고려하는 선형 Boussinesq 방정식을 지배방정식으로 사용하는 것이 바람직하다. 하지만 지금까지의 지진해일 전파모의를 위한 모형은 선형 Boussinesq 방정식의 복잡한 계산과 계산시간이 길다는 단점 때문에 선형 천수방정식을 지배방정식으로 사용하고 분산효과는 수치분산을 이용하여 고려해왔다. 지진해일 해석 시 일반적으로 사용되어 오던 기존의 leap-frog 유한차분 모형(Imamura et al., 1988; 조용식, 1996)은 지배방정식으로 선형 천수방정식을 사용하고 파의 분산효과는 수치분산을 이용하여 고려하므로 정해진 시간 간격에 대해 수심에 따라 격자 간격을 적절히 선택해야 하는데 수심이 복잡하게 변하는 경우 격자간격 조정이 불가능하여 분산효과를 정도 높게 고려할 수 없다. 이 문제점을 해결하기 위하여 윤성범 등(2004)은 파동방정식의 인위적인 분산항을 이용하여 Boussinesq 방정식의 분산효과를 고려할 수 있는 능동적인 분산보정기법을 제안하였고 Cho et al.(2007)는 일정한 수심에서 수치적인 분산오차가 Boussinesq 방정식의 물리적인 분산항을 대체하도록 수심, 격자 간격 및 계산 시간 간격 사이의 관계식을 유도하고 Boussinesq 방정식의 분산항과 일치하는 수치분산을 이용하여 실용적인 분산보정기법을 개발하였다. 이에 Ahn(2010)은 현재 컴퓨터의 계산 능력이 향상되어 선형 Boussinesq 방정식을 직접 차분하여 계산하는데 무리가 없다고 판단하여 선형 Boussinesq 방정식을 직접 차분한 모형을 개발하였다. 본 연구에서는 기존의 원해 지진해일 전파모의에 이용되어왔던 선형 천수방정식에 수치분산을 고려한 모형 대신 선형 Boussinesq 방정식의 유한차분 모형을 제안하였으며 기존의 선형 Boussinesq 방정식 모형의 격자와 수심간의 제약을 없애기 위해 차분 기법을 달리 한 2차 정확도의 유한차분 모형을 제안하였다. 검증을 위하여 선형 Boussinesq 방정식의 해석해(Carrier, 1991)와 비교하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.113-121
• /
• 2005

In this paper, a constant output power supply system for ozonizer is proposed to remove the noise of ozonizer and control the output of ozonizer using feedback control. The proposed system is based on the rouble control loop such as the outer voltage control loop and inner current control loop. In the proposed system overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.254-260
• /
• 2013

This paper deals with electromagnetic characteristics of IPMSM (Interior Permanent Magnet Synchronous motor) caused by field weakening current control. In order to extend operation speed, field weakening current control is generally used in IPMSM operation. During field weakening, distorted linkage fluxes are resulted by saturation of core material. Therefore, distorted input voltage waveform is required for sinusoidal current input. As the current vector angle increases for field weakening, distortion of linkage flux and back-emf becomes significant. This situation is analyzed by 2-dimensional finite element analysis and verified by experiment. With the results, it is concluded that motor parameters, such as linkage flux by permanent magnet, phase resistance, d-q axis inductance, are insufficient for estimating required voltage for given speed especially in field weakening and additional considerations for increased harmonics of voltage are required.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.59-68
• /
• 1999

The timing characteristics of an ASIC are analyzed based on the propagation delays of each gate and interconnect wire. The gate delay can be modeled using the two-dimensional delay table whose index variables are the input transition time and the output load capacitance. The AWE technique can be adopted as an algorithm to compute the interconnect delay. Since these delays are affected by the interaction to the two-dimensional delay table and the AWE technique. A method to model this effect has been proposed through the effective capacitance and the gate driver model under the assumption of single driving gate. This paper presents a new technique to handle the multiple CMOS gates driving interconnect wire by extending previous approach. This technique has been implemented in C language and applied to several interconnect circuits driven by multiple CMOS gates. In most cases, we found a few tens of speed-up and only a few percents of errors in computing both of gate and interconnect delays, compared to SPICE.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.89-93
• /
• 1995

To reduce the redundancy within samples that resulted from uniform sampling method, nonuniform sampling or nonredundant-sample coding methods can be considered. However, it is well known that when conventional nonuniform sampling methods are applied directly to speech signal, the required amount of data is comparable to or mure than that by uniform sampling method like PCM. To overcome this problem, a new nonuniform sampling method is proposed, in which nonuniform sampling is applied to the low-pass filtered speech signal and higher band is compensated by 8 colored Gaussian random noise with various noise levels. By this method, speech signal waveform can be encoded by 1.8 times larger compression ratio than the conventional nonuniform sampling method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.261-269
• /
• 2013

In this paper, the evoked potential(EP) was represented by additive delay model to comply with the variational noisy response of stimulus-event synchronization. The hybrid method of delay compensated-Wiener filtered-ensemble averaging(DWEA) was proposed to enhance the EP signal distortion occurred during averaging procedure due to synchronization timing mismatch. The performance of DWEA has been tested by surrogated simulation, which is composed of synthesized arbitrary delay and arbitrary level of added noise. The performance of DWEA is better than those of Wiener filtered-ensemble averaging and of conventional ensemble averaging. DWEA is endurable up to added noise gain of 7 for 10 % mean square error limit. Throughout the experimentation observation, it has been demonstrated that DWEA can be applied to enhance the evoked potential having the synchronization mismatch with added noise.