• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.332-345
• /
• 2013

In this paper, recently, it is described to the piezoelectric transformer technology develops, because it was have to favorable characteristics such as electromagnetic-noise free, compact size, higher efficiency, and superior power density, flux linkage, noiseless, etc. its resonance frequency was used to output waveform of a sine wave. A rotor speed identification method of induction motor based on the theory of flux model reference adaptive system(FMRAS). The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the model are introduced to perform accurate rotor speed estimation. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM techniuqe and DC-DC converter. High speed calculation and processing for vector control is carried out by digital signal one chip microprocessor. Validity of the proposed control method is verified through simulation and experimental results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.2
• /
• pp.131-139
• /
• 2012

In this study, the numerical analysis has been conducted in order to check behavior characteristics of liner plate made of corrugated steel from urban small sized tunnel excavation. The analysis was conducted with five kinds of conditions like 5 m, 10 m, 15 m, 20 m and 25 m to examine the behavior characteristics of liner plate according to the depth of cover. Analysis results showed that the maximum axial stress and the maximum displacement occurs in the lower end of the member, and the maximum shear stress occurs in the upper part of the member. Also, change of displacement, stress shearing stress of liner plate based on various depth of cover are existed, but the difference is slight, and by increasing depth of cover, structural stability is gradually ensured.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2008

This paper deals with a millimeter wave source which is utilizing sub-harmonic injection-synchronization technique. A 8.7GHz oscillator with MES-FET is fabricated, and is driven as a harmonic output oscillator at 17.4GHz by means of sub-harmonic injection-synchronization. The oscillator operates as a multiplier as well as oscillator in this system. Adopting this technique, we can obtain a high stable, high frequency millimeter wave source even though self-oscillating frequency of an oscillator is relatively low. In the experiments, the range of injection-synchronization is about 26MHz and is proportional to the input sub-harmonic power. From the spectrum analysis of the 2nd harmonic output. we blow that the phase noise of the harmonic oscillator is remarkably decreased.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.667-673
• /
• 2010

Copper filling into TSV (through-silicon-via) and reduction of the filling time for the three dimensional chip stacking were investigated in this study. A Si wafer with straight vias - $30\;{\mu}m$ in diameter and $60\;{\mu}m$ in depth with $200\;{\mu}m$ pitch - where the vias were drilled by DRIE (Deep Reactive Ion Etching) process, was prepared as a substrate. $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to reduce the time required complete the Cu filling into the TSV, the PPR (periodic pulse reverse) wave current was applied to the cathode of a Si chip during electroplating, and the PR (pulse-reverse) wave current was also applied for a comparison. The experimental results showed 100% filling rate into the TSV in one hour was achieved by the PPR electroplating process. At the interface between the Cu filling and Ti/ Au functional layers, no defect, such as a void, was found. Meanwhile, the electroplating by the PR current showed maximum 43% filling ratio into the TSV in an hour. The applied PPR wave form was confirmed to be effective to fill the TSV in a short time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.31-31
• /
• 2016

국내 해안선을 따라 발생되는 침식 및 퇴적현상으로 인하여 해안구조물의 안정성과 같은 안전 문제가 발생되고 있다. 이러한 자연현상을 대비하여 연안지역 특성에 맞는 침식 저감 대책 마련에 대한 연구가 되고 있다. 침식현상은 다양한 외력조건과 지리적 특성을 함께 고려해야 한다. 고립파로 인한 침식 발생 현상에 대한 국외 연구들이 다수 수행되어 왔으며, 국내에는 이와 관련된 연구가 상대적으로 부족하다. 고립파는 파고의 특성에 따라 파형이 결정되는 특징을 가지고 있어, 침식현상과 지진해일의 실험적 연구에 있어 입사파로 주로 활용되고 있다. 기존의 방법과 동일하게 sluice gate를 순간적으로 개방하여 고립파를 재현하는 방식으로 파랑을 재현하였다. 본 연구에서는 폭 0.80 m, 높이 0.75 m, 수로연장 12.00 m의 강화유리로 설계된 직사각형 단면 수로에서 실험을 수행하였다. 측면에 두 대의 카메라(Model No. : Sony, HDR-XR550)를 고정설치하여 경사면 하상변화를 촬영하였고, 영상분석을 통하여 하상변동을 측정하였다. 유사특성에 따른 하상변동을 연구하기 위하여 경사면에 포설된 유사로는 주문진 표준사($d_{50}=0.6268mm$, $c_u=1.68$)와 안트라사이트($d_{50}=1.547mm$, $c_u=1.387$)를 동일한 실험조건에서 함께 사용하였다. 경사면에서 고립파의 처오름, 처내림을 추적하여 그 경향을 분석하였다. 하상의 침식 및 퇴적구간 길이, 침식, 퇴적의 높이 및 깊이와 같은 형상분석을 통한 영향인자를 함께 무차원화 하여 실험결과를 제시하였다. 본 연구의 결과를 바탕으로 Sluice gate를 이용한 고립파 수리실험으로 경사면 하상의 침식 및 퇴적 현상에 관한 기초적인 실험자료로 활용될 것이다.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.791-801
• /
• 2019

The serial arc is one of factors causing electrical fires. Over past decades, various researches have been carried out to detect arc occurrences. Even though frequency analysis, wavelet and statistical features have been used, arc detection performance is degraded due to diverse arc waveforms. Therefore, there is a need to develop a method that could increase the feature dimension, thereby improving the detection performance. In this paper, we use variational mode decomposition (VMD) to obtain multiple decomposed signals and then extract statistical features from them. The features from VMD outperform those from no-VMD in terms of detection performance. Further, artificial neural network is employed as an arc classifier. Experiments validated that the use of VMD improves the classification accuracy by up to 4 percent, based on 14,000 training data.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.549-557
• /
• 2019

The acoustical scattering characteristics of a target are influenced by the material properties and structural characteristics of the target, which are critical information for acoustic detection and identification of underwater target. In particular, for thin elastic target, unique scattered signals are generated around the target by the Lamb wave. In this paper, the results of scattered signal measurement of aluminum spherical shell in the water tank using the stepped frequency sweep sine signal are presented. In particular, the scattering of the water-filled aluminum spherical shell is compared with that of the air-filled one both theoretically and experimentally. The difference of the scattered signals are analyzed using the pseudo Wigner-Ville distribution in terms of average frequency, frequency distribution, and energy of the scattered signal. The result shows that all observed parameters increased when the aluminum sphere was water-filled, and it is well matched to the theoretical expectation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.32-39
• /
• 2005

The effectiveness of the pogo suppression device (PSD) on the response of the piping system simulating the fuel (or oxidizer) supply lines of the rocket engines was investigated. The system response defined as the ratio of the flow rate to the pressure in the main tube was obtained for various PSD gas volumes $((0\~2)\times10^{-3}m^3)$ and three different baffle hole diameters (5, 50, 115mm). Existence of a gas volume in the PSD reduced the system resonance frequency. With a larger gas volume, the resonance frequency became lower, but only slightly, while the fluctuations of the main tube pressure and the flow rate damped down considerably. The resonance frequency decreased with the increase of the PSD inlet restriction (or the decrease of the baffle hole diameter), though slightly. However, with a larger inlet restriction, the PSD pressure wave showed a delayed response with the smaller amplitude compared to the pressure variation in the main tube.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.8-16
• /
• 2019

Customized sleep care service needs to be provided differently for individuals since individual has different degree of sleep disorder. Because the brainwave data shows unique waveform characteristics for each person, this characteristic can be used to identify individuals. Personal identification provides an important role in enabling customized services. When you blink, you can obtain brain wave characteristics by measuring the area of the frontal lobe. Therefore, a real-time personal identification algorithm based on blinking EOG for customized sleep care service is proposed in this paper. For evaluation, 10 individuals were tested for personal identification accuracy. The results of the experiment confirmed that a maximum accuracy of 93% were taken. Algorithms can be developed by reflecting characteristics such as changes in the external environment in the future.