• Journal of Korean Society of Steel Construction
• /
• v.27 no.5
• /
• pp.455-470
• /
• 2015

This research suggest method to calculate more accurate shearing and bending force on corrugated steel plate that it is produced domestically. This research analyze limitation of former formula on domestic design standard and existing research. In addition The strength calculation formula on corrugated steel plate was proposed according to result of the experiment and FEM analysis. In this study, the result that compare experiment with analysis using the proposed shear buckling coefficient and limit width to thickness ratio indicate similar behavior. As the result of the research, It is judged that the structural member design and performance evaluation of the corrugated steel plate was conveniently applied.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.79-87
• /
• 2011

Deep corrugated steel plate structure has more compressive force and flexibility in bending behavior than short span structure. Asymmetric earth pressure distribution has occurred during construction. Ultimate strength and moment in domestic area, having superior ability at bending strain has been examined in this study. Based on the result of the study preceded, performance of Deep corrugated steel plate specimen has been evaluated by comparing increase of strength according to the increase of reinforcement content in bolt connections and failure mode of specimen.

• Journal of the Korean Magnetics Society
• /
• v.22 no.1
• /
• pp.27-31
• /
• 2012

Two radially arterial pulses of both hands using the prototype of a clamping clip pulsimeter equipped with permanent magnet and Hall device are compared and analyzed. The phase difference of two pulse wave signals is dominantly presented from the simultaneous measuring clinical pulse wave signals for twenty two male participants at their 20's. It is possible to analyze that the fast and slow pulse wave for right hand and left hand depend on the muscle property of arms rather than the total length of blood vessel due to cardiovascular circulatory system.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.845-852
• /
• 1995

We investigate the concurrent solution of differential equations by the waveform relaxation (WR) method, an iterative method for analyzing linear and nonlinear dynamical systems in the time do-main. The method, at each iteration, decomposes the dynamical system into several subsystems, each of which is analyzed for the entire given time interval. The method, when efficiently implemented, results in algorithms with a highly parallelizable concurrent fraction. In this paper, the waveform relaxation method is introduced and applied to two types of reactor dynamics problems. It is concluded that the U method can be applied to reactor dynamics equations, but that its parallel performance on the KMRR dynamics is only modest.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.90-96
• /
• 2014

The magnetic field variation by the permanent magnet fluctuation positioned on a "Chwan" of wrist according to the movement of radial artery was generated. The clip-type pulsimeter equipped with a Hall device sensing magnetic field pulse movement analyzed the characteristics of pulse wave as output signals. The magnetic field curve and pulse waveform simulated by the finite element method were compared and analyzed with each other. Also, the variation of magnetic field distribution one permanent magnet investigated by the fabrication of clip-type pulsimeter simulator. This result suggests that the clip-type pulsimeter can be used the reproducible and efficacious oriental diagnostic medical instrument.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.69-74
• /
• 1991

전력용 MOSFET를 사용한 새로운 PAM-PWM 인버터를 제안한다. 제안된 PAM-PWM 인버터의 출력파형을 이론과 실험적으로 연구했다. 선간전압파형은 기본파성분과 캐리아 주파수의 사이트벤드로 집중되어 저차 고주파는 출력파형에 포함되지 않았다. 각 인버터 아암은 2/3주기 동안 동작하지 않음으로 소자의 발열도 줄어든다. 그러므로 방열판의 감소에 의하여 인버터 시스템의 크기도 작아진다.

• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.138-145
• /
• 2000

고체재료의 열확산계수나 열전도계수와 같은 열물성을 비접촉식 방법으로 측정하기 위하여 광열변위법에 대한 이론적인 해석을 수행하였다. 가열빔의 파형을 코사인파, 삼각파 그리고 사각파로 가정하여 2차원 열전도 방정식과 열탄성 방정식의 엄밀해를 구하였고, 이를 가열빔으로부터 직접 구한 실제파의 결과와 비교하였다. 코사인파의 결과가 다른 파형에 비하여 실제파와 가장 유사한 것으로 보아 비교적 해석이 복잡한 실제파를 코사인파로 가정하여도 무방하다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.680_681
• /
• 2009

본 논문에서는 인버터 시스템에서 발생하는 소자 단락을 막기 위해 필수적인 시간 지연 요소인 데드타임 보상을 통하여 인버터시스템의 출력전류 파형 개선과 고조파 저감을 위한 방법을 제안하였다. 제안된 방법을 3KW 급 인버터에 적용하여 실험을 통하여 파형 개선과 고조파 함유율이 현저히 감소함을 확인하고 본 논문에서 제안한 데드타임 보상 방법의 유효성과 우수성을 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.159-162
• /
• 1998

불발 음원에 따른 음원 배열의 빔 패턴 변화와 남극탐사자료에서 원거리장 파형 변화를 분석하였다. 원거리장 파형의 주신호 진폭은 전체 건 부피의 약 40%에 해당하는 음원들이 불발을 일으킬 경우, 탐사성능이 33% 정도 떨어지는 것으로 확인되었다. 같은 간격의 음원들이 불발 시에는 배열형태와 관계없이 길이 및 폭배열의 빔 폭이 동일하게 나타난다. 불발 음원의 부피가 증가됨에 따라 상대적으로 음파 에너지가 작아 지지만 빔 폭이 40$^{\circ}$ - 34$^{\circ}$로 좁아지는 경향을 나타낸다. 따라서 탄성파 탐사에서 필요로 하는 좁은 파형이 생성됨으로써 천부 지층탐사에 적합한 것으로 확인되었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.4
• /
• pp.1-7
• /
• 1969

A Series Inverter circuit is analyzed and Fourier analysis is applied to its output waveform. It is proved that under the optimum condition the Output is nearly sinusoidal wave which contains only odd harmonic Components and the relative amplitude of the hramonic components are expressed with very simple formula which contain only "Q" of the circuit as a parameter.parameter.