• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.27-38
• /
• 2004

In this study, the reliability design method developed by Shimosako and Takahashi in 1999 for calculation of the expected sliding distance of the caisson of a vertical breakwater is extended to take into account the variability in wave direction such as directional spreading of waves, obliquity of the deep-water design principal wave direction from the shore-normal direction, and its variation about the design value. To calculate the transformation of random directional waves, the model developed by Kweon et al. in 1997 is used instead of Goda's model, which was developed in 1975 for unidirectional random waves normally incident to a straight coast with parallel depth contours and has been used by Shimosako and Takahashi. The effects of directional spreading and the variation of deep-water principal wave directions were minor compared with those of the obliquity of the deep-water design principal wave direction from the shore-normal direction, which tends to reduce the expected sliding distance as it increases. Especially when we used the field data in a part of east coast of Korea, considering the variability in wave directions reduced the expected sliding distance to about one third of that not considering the directional variability. Reducing the significant wave height calculated at the design site by 6％ to correct the effect of wave refraction neglected in using Goda's model was found to be proper when the deep-water design principal wave direction is about 20 degrees. When it is smaller than 20 degrees, a value smaller than 6％ should be used, or vice versa. When we designed the caisson with the expected sliding distance to be 30㎝, in the area of water depth of 25 m or smaller, we could reduce the caisson width by about 30％ at the maximum compared with the deterministic design, even if we did not consider the variability in wave directions. When we used the field data in a part of east coast of Korea, considering the variability in wave directions reduced the necessary caisson width by about 10% at the maximum compared with that not considering the directional variability, and is needed a caisson width smaller than that of the deterministic design in the whole range of water depth considered (10∼30 m).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.219-225
• /
• 2004

Following a preceding study if Shin et al.(2004), wave fields for a month if September if 2003 are simulated based on the modified WAM cycle 4 model that enables the precise wave hindcasting with fine spatial meshes, and characteristics of extreme waves at the south roast if Koreo are analyzed The accuracy if applied wave model is verified by comparing computed wave parameters and corresponding ones measured at Ieodo ocean research station. The wave hindasting if typhoon 'Maemi' with an hour time interval reveals the extreme wave characteristics at 4 primary locations if south coast of Korea as follows: 1) At the front sea of Chaguido in the south of Jeju-do, the maximum significant wave height, moon wave period and mean wave direction appear to be 7.41m, 13.65s and $6.4^{\circ}$, respectively at 16:00 KST if Sep. 12, 2003. 2) At the entrance of Masan Bay, 12.50m, 13.65s and $1.2^{\circ}$ at 21:00 KST if Sep. 12. 3) At the front sea of Suyoung Bay, 13.85m, 13.81s and $0.2^{\circ}$ at 22;00 KST if Sep. 12. 4) At the front sea of Ulsan port, 11.00m, 13.25s and $28^{\circ}$ at 23:00 KST if Sep.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.745-751
• /
• 2004

Following a preceding study of Shin et al.(2004), wave fields for a month of September of 2003 are simulated based on the modified WAM cycle 4 model that enables the precise wave hindcasting with fine spatial meshes, and characteristics of extreme waves at the south coast of Korea are analyzed The accuracy of applied wave model is verified by comparing computed wave parameters and corresponding ones measured at Ieodo ocean research station. The wave hindcasting of typhoon 'Maemi' with an hour time interval reveals the extreme wave characteristics at 4 primary locations of south coast of Korea as follows: 1) At the front sea of Chaguido in the south of Jeju-do, the maximum significant wave height, mean wave period and mean wave direction appear to be 7.41m, 13.65s and $6.4^{\circ}$ respectively at 16:00 KST of Sep. 12, 2003. 2) At the entrance of Masan Bay, 12.50m, 13.65s and $1.2^{\circ}$ at 21:00 KST of Sep. 12. 3) At the front sea of Suyoung Bay, 13.85m, 13.81s and $0.2^{\circ}$ at 22;00 KST of Sep. 12. 4) At the front sea of Ulsan port, l1.00m, 13.25s and $2.8^{\circ}$ at 23:00 KST of Sep. 12.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2009.10a
• /
• pp.81-84
• /
• 2009

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.161-169
• /
• 2020

Physical experiments have been performed in a wave basin to investigate change of the wave loading on the crown wall under obliquely incident wave conditions. The measurement was carried out with wave incidence angle of 0, 15, 30 and 45°. The pressure transducers were placed on the front and bottom face of the crown wall to obtain horizontal and uplift force as well. It was found that both the horizontal and vertical force decreases with the incidence angle. Based on the analysis of the experimental data, a formula was suggested to estimate the reduction rate of horizontal and vertical forces under obliquely incident waves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.1
• /
• pp.55-59
• /
• 2005

The present data concerns the wave height distribution around the Ieodo underwater rocks and it was obtained from a 3D hydraulic model experiment which was performed in 1999 by Konkuk University and Korea Ocean Research and Development Institute. The experiment was separately undertaken for 4 different wave directions (NNW, SE, S, NNW) under which wave heights were measured at every 1m interval within the preset grid area, 16m×18m. It was observed that the wave breaking occurred on the top of the Ieodo model for all wave directions. This data may be effectively used for improving or verifying the performance of numerical wave propagation models in the area with the local breaking wave zones.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.38-48
• /
• 2002

Theoretical development to generate the directional extreme waves in model basin is established based on wave focusing method. The effects of associated parameters, such as the directional range, frequency width, and center frequency, are investigated in terms of wave focusing efficiency. The two different spectral models of constant wave amplitude and constant wave slope are applied to control the wave characteristics. The wave packets simulated by theory are compared with numerical results based on Boussinesq equation and FEM. Both controls of direction and frequency spectrum are essential to focus directional waves effectively. It is noticed that wave focusing ability depends on the frequency bandwidth of spectrum rather than center frequency, and both spectral models with same parameters result in the equivalent efficiency of wave focusing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2109-2112
• /
• 2007

독도는 울릉도에서도 동남쪽으로 약 87.4km 떨어져 외해의 영향을 많이 받고 있는 지역이지만 방파제 등 외곽시설이 전무하여 평상파랑에도 접안이 어려운 경우가 많아서 독도 관광자원 활용도 및 편의시설 제공면에서 많은 어려움이 있다. 이에 본 연구에서는 독도 접안시설의 전면에 최근 국내에 본격적으로 도입되고 있는 부방파제(floating breakwater)를 설치할 경우 고정식 방파제 설치에 따른 문제점을 충분히 개선할 수 있다고 판단하여, 부방파제 설치에 따른 기술적인 타당성과 부두 이용률 개선효과 등을 연구 하였다. 독도의 접안시설은 해역이 동도와 서도에 의해 북쪽은 일부 차폐되고 남쪽은 직접 노출되어 있는 지리적 특성이 있어 주 파향인 남쪽계열의 8개 파향(SE, SSE, S, SW, SSW, WSW, W, WNW)의 평상파 제어가 가능하도록 방파제를 배치하였고, 이에 따른 부두 이용률 검토결과 부방파제를 설치할 경우 남쪽계열 파랑에 대하여 현상태에 비하여 부두 이용률이 대략 2배정도 증가되는 것으로 나타났으며, 부방파제 계류시스템의 안정에 대해서도 부체에 영향을 주는 외력에 대하여 계류체인의 길이와 Anchor Block 자중의 규모를 적당히 조정하면 충분히 안정한 것으로 검토되었다.

• Journal of Korea Water Resources Association
• /
• v.56 no.8
• /
• pp.521-528
• /
• 2023

An approach for producing a rip current risk index using the rip current likelihood distribution obtained through the FUNWAVE simulations was applied to a rip current forecast system. The approach originally developed for an observation-based real-time rip current warning system was utilized with wave forecast data instead of observations for the rip current forecast system. The availability of the present approach was checked by comparing the observation-based rip current risk index and the wave forecast-based rip current risk index of the Haeundae Beach in 2021.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.69-83
• /
• 2006

A Level 3 reliability analysis has been performed for wave run-up and overtopping on a sloping seawall. A Monte-Carlo simulation was performed considering the uncertainties of various variables affecting the wave overtopping event. The wave overtopping probability was evaluated from the individual wave run-up by using the wave-by-wave method, while the mean overtopping rate was calculated directly from the significant wave height. Using the calculated overtopping probability and mean overtopping rate, the maximum overtopping volume was also calculated on the assumption of two-parameter Weibull distribution of individual wave overtopping volume. In addition, by changing wave directions, depths, and structure slopes, their effects on wave overtopping were analyzed. It was found that, when the variability of wave directions is considered or the water depth decreases toward shore, wave height become smaller due to wave refraction, which yields smaller mean overtopping rate, overtopping probability and maximum overtopping volume. For the same mean overtopping rate, the expected overtopping probability increases and the expected maximum overtopping volume decreases as approaching toward shore inside surfzone.