• Title/Summary/Keyword: 파장 분할 다중화

Search Result 111, Processing Time 0.033 seconds

Ultra high speed and high capacity optical transmission techniques (초고속 대용량 광전송 기술)

  • Kim Geun-Young;Lee Yong-Gi;Song Kil-Ho
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2002.08a
    • /
    • pp.127-129
    • /
    • 2002
  • ADSL, Metro Ethernet등 가입자에게 넓은 대역폭을 할당하는 기술이 서비스 영역에 적용되고 있음에 따라 이를 원활히 수용할 수 있는 초고속 대용량 기간망 구축기술이 필요하다. 현재 사용되는 기술로는 2.5Gbps 또는 10Gbps의 전송속도를 갖는 수 십 채널을 각각 파장이 다른 광반송파(optical carrier)에 실어 광학적으로 다중화한 뒤 한 가닥의 광섬유를 통해 전송시키는 파장분할 다중화(Wavelength Division Multiplexing: WDM) 기술이 있다. 본 논문에서는 채널 당 전송 속도를 40Gbps로 증가시키거나, 증폭기 이득 대역폭을 확장시켜 채널 수를 증가시켜 수 THz의 전송용량을 수 천 km 전송시키는데 필요한 라만 광증폭기 기술, FEC 기술, 변조포맷, 분산관리(Dispersion management)기술 등의 핵심기술을 소개한다.

  • PDF

Structure optimization of a L-band erbium-doped fiber amplifier for 64 optical signal channels of 50 GHz channel spacing (50 GHz 채널 간격의 64 채널 광신호 전송을 위한 L-band EDFA의 구조 최적화)

  • Choi, Bo-Hun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.26 no.11
    • /
    • pp.1666-1671
    • /
    • 2022
  • The structure of a high-power gain-flattened long wavelength band (L-band) optical amplifier was optimized, which was implemented for 64-channel wavelength division multiplexed optical signals with a channel spacing of 50 GHz. The output characteristics of this L-band amplifier were measured and analyzed. The amplifier of the optimized two-stage amplification configuration had a flattened gain of 20 dB within 1 dB deviation between 1570 and 1600 nm for -2 dBm input power condition. The noise figure under this condition was minimized to within 6 dB in the amplification bandwidth. The gain flattening was realized by considering only the characteristics of gain medium in the amplifier without using additional optical or electrical devices. The proposed amplifier consisted of two stages of amplification stages, each of which was based on the erbium-doped fiber amplifier (EDFA) structure. The erbium-doped fiber length and pumping structures in each stage of the amplifier were optimized through experiments.

Gain Flattening Filter using Long Period Fiber Grating based on Microbends (미세구부림 방식의 장주기 광섬유 격자를 이용한 이득 평탄화 필터)

  • 이상훈;박희수;송광용;황인각;김병윤
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.80-81
    • /
    • 2000
  • 최근 통신 서비스의 증가에 따라 대용량의 전송 용량이 요구되고 있으며, 이에 대한 해결책으로 파장분할다중(WDM) 방식의 광전송에 관한 많은 연구가 수행되었다. EDFA는 1550 nm 근처에서 이득 영역을 가지고 있기 때문에 장거리 광통신 시스템에 주된 광증폭기로 사용되고 있으나 파장에 따른 이득이 서로 다르게 나타나기 때문에, WDM 시스템에 이용하기 위해서는 EDFA의 이득 평탄화가 필요하며, 이에 대한 다양한 연구가 이루어지고 있다. (중략)

  • PDF

Crosstalk analysis of laser-diode array modules for wavelength division multiplexing (파장 분할 다중화 방식을 위한 고속 레이저 다이오드 배열 모듈의 혼신해석)

  • 김성일;이해영
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.7
    • /
    • pp.71-78
    • /
    • 1997
  • In this paper, we analyzed the crosstalk characteristics of LD array modules for WDM and improved the crosstalk levels using a screening line between access lines. From the calculation resutls, we have found that inductive crosstalk of access lines is dominant for the low impedance LD arrays with short bondwire interconnections. The proposed array interconnecton with the screening line and ouble bondwires, rduces the crosstalk level about 10dB compared to conventional interconnections using simple access lines and a single bondwire. This proposed structure also can be easily imlemented with transmission reliability.

  • PDF

Routing with Maximum Edge Disjoint Paths and Wavelength Assignment with Path Conflict Graph (최대 EDP를 이용한 경로설정 및 경로 충돌 그래프를 이용한 파장할당 문제 해결 방안)

  • Kim Duk Hun;Chung Min Young;Lee Tae-Jin;Choo Hyunseung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.7B
    • /
    • pp.417-426
    • /
    • 2005
  • Routing and wavelength assignment problem is one of the most important issues in optical transport networks based on wavelength division multiplexing(WDM) technique. In this paper, we propose a novel approach using path conflict graphs and an algorithm for finding all edge disjoint paths. And then we compare the performance of the proposed algorithm with that of bounded greedy approach for EDP(BGAforEDP). The proposed one outperforms up to about 20$\%$ in the fixed traditional topology(NSFNET) and about 32$\%$ in random topologies over the BGA for EDP algorithm.

Wavelength and Repetition-Rate Tunable Optical Pulse Generation for Ultrafast OTDM/WDM (초고속 OTDM/WDM을 위한 파장 및 반복율 가변 광 펄스 발생)

  • Choi, Kyoung-Sun;Han, Chong-Min;Seo, Dong-Sun;Jhon, Young-Min;Lee, Seok
    • Journal of IKEEE
    • /
    • v.5 no.2 s.9
    • /
    • pp.201-210
    • /
    • 2001
  • Wavelength and repetition-rate tunable optical pulse-trains for ultrafast optical time- and wavelength division multiplexing are generated from a semiconductor fiber ring laser by optical injection mode-locking. The pulse trains show the pulse with of ${\sim}10$ ps and the wavelength tuning of wider than 30 nm at various repetition-rates of 10 GHz, 20 GHz, 30 GHz and 40 GHz, respectively.

  • PDF

Flat-band path filters based on one-dimensional photonic crystals (일차원 광자결정을 이용한 평탄밴드 투과 필터)

  • Nam, Gi-Yeon;Lee, Eun-Sun;Im, Woo-Sick;Kim, Jun-Hyong;Cho, Sung-June;Lee, Hyun-Yong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.526-528
    • /
    • 2005
  • 파장 분할 다중화 방식 (WDM)의 광통신은 중앙 기지국에서 각 가입자에게 서로 다른 파장을 할당하여 동시에 데이터를 전송하는 방식으로서 각 가입자는 할당된 파장을 이용하여 항상 데이터를 송/수신할 수 있고 각 가입자에게 대용량의 데이터를 전송할 수 있을 뿐만 아니라 통신의 보안성이 뛰어나고 성능 향상이 용이하다 따라서 상, 하향(양방향, bidirectional) 3 파장 WDM-필터 소자(Flat band-path filter)는 광 가입자망 구축에서 통신 방송을 융합한 양방향 고화질 멀티미디어 서비스 사업에 반드시 필요로 하는 원천 부품이다. 본 연구에서는 1차원 광자결정을 이용한 저 손실 양방향 3 파장 WDM-필터를 얻을 수 있는 이론적 모델을 설계하고 그에 따라 2-cavity $Ta_2O_5/SiO_2$ 1차원 광자결정체를 제작하고 그 특성을 고찰 하였다. 파장에 따른 투과도 측정 결과 1550nm파장에서 투과되고 1310nm 및 1490nm파장에 대한 차단이 이론값과 일치하였다. 1550nm 파장 대에서 손실이 매우 낮은 flat-투과 밴드가 생성되었다. 특히 입사각도에 따라 flat-band 중심 파장의 변화를 이용하므로 새로운 개념의 WDM 소자로의 응용이 가능하다.

  • PDF

Tunable laser source using a self-seeding FP-LD (Self-seeding FP-LD을 이용한 파장 가변 레이저 광원)

  • Kim, Jung-Min;Lee, Hyuek-Jae
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.22 no.3
    • /
    • pp.104-109
    • /
    • 2021
  • In this paper, we experimentally demonstrate a self-seeding FP-LD (Fabry Perot Laser Diode) to verify the possibility of a new tunable light source that can be used in WDM-PON (Wavelength Division Multiplexing - Passive Optical Network) system. The conventional implementation of WDM-PON using a tunable light source has a disadvantage that the center wavelength of the AWG (Arrayed Waveguide Grating) device and the tunable light source must be precisely aligned. However, the proposed tunable light source has the advantage that the tunable wavelength is automatically aligned with the center wavelength of the AWG as well as simple structure. The implemented tunable light source had a tunable band of about 14 nm or more, and the maximum RIN (Relative Intensity Noise) of about -124 dB/Hz, which showed the possibility of modulating 10 Gb/s signal by an external modulator.

Measurement of Optical Wavelength Using a $LiNbO_3$ Mach-Zehnder Modulator ($LiNbO_3$ 마하젠더 광변조기를 이용한 광파장 측정)

  • 정형기;오현호;정윤철;신상영
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.08a
    • /
    • pp.148-149
    • /
    • 2000
  • 파장분할다중(WDM) 광통신시스템에서 광원의 파장을 정확하게 측정하는 것은 매우 중요하다. 지금까지 광파장측정기는 격자나 Fabry-Perot 에탈론을 사용한 광대역 필터(optical bandpass filter) 및 파장에 따라 삽입손실이 다른 파장판별기(wavelength discriminator)등으로 구현되었지만 빛의 간섭 현상을 이용한 마이켈슨 간섭계가 가장 많이 사용되었다. 특히 푸리에 변환 마이켈슨 간섭계 파장측정기$^{(1)}$ 는 동시에 각각 다른 파장의 광원들이 입사되더라도 각각의 파장을 측정할 수 있는 장점이 있다. 즉 마이켈슨 간섭계에서 주기적인 간섭무늬에 의한 광검출기의 출력은 입력된 광파장에 따라 다른 주기를 가진다. 따라서 서로 다른 파장을 가진 빛이 입사했을 때 검출되는 각각의 광전력의 합을 표본화(sampling)한 뒤 FFT를 거치면 광파장과 광검출기로 수신한 신호의 중심 주파수의 관계를 알 수 있으므로, 서로 다른 파장을 가진 빛이 입사하더라도 각각의 파장을 측정할 수 있는 것이다. 본 논문에서는 푸리에 변환을 이용하되 마이켈슨 간섭계 대신 마하젠더 간섭계형 광변조기를 이용하여 광파장을 측정에 관한 실험적 구현과 개선 방안에 대해 제시한다. (중략)

  • PDF

Cain Control Method and Controller Design in Erbium-Doped fiber Amplifier (광섬유 증폭기에서의 이득제어 방법과 제어기 설계)

  • 염진수;이정찬;류광열;허창우
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.6 no.3
    • /
    • pp.434-439
    • /
    • 2002
  • 본 연구는 파장 분할 다중화(WDM:Wavelength Division Multiplexing) 방식 전송 시스템 (Transmission System)에 사용되는 어븀 첨가 광섬유 증폭기(EDFA : Erbium-Doped Fiber Amplifier)의 이득 제어(Gain Control) 방법에 관한 것으로 어븀 첨가 광섬유에서 상호 이득 포화(Cross Gain Saturation) 현상, 이득 비동질 (Gain In-homogeneity) 특성, 그리고 어븀 이온의 밀도 반전(Population Inversion)의 변화 에 의해 출력되는 다 파장 광 신호들의 광 세기가 각기 다르게 출력되는 현상을 고출력을 내도록 구성된 어븀 첨가 광섬유 증폭기와 고속 제어기를 구성하여 위 현상들을 억제하며 이득을 제어하기 위한 레이저 다이오드(Laser Diode : LD)의 제어전압 조사하고, 얻어진 결과들을 토대로 이득 제어에 적합한 방법을 제시하고 제어기를 설계한다.