• Water for future
• /
• v.22 no.2
• /
• pp.223-231
• /
• 1989

A dynamic levee breach model is demonstrated which can be applied to various types of breach such as overtopping, breaking, and piping. Through a hypothetical simulation the sensitivity of brach width and duration in the result are discussed. the breach width has more important effect than the failure duration upon a side discharge owing to levee breach.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.689-696
• /
• 2008

In this study, seepage characteristics of breakwater in dredging ground evaluated for the piping stability estimation by scale model tests. For this, to estimated the seepage characteristics through the model tests and numerical analyses, the engineering stability on piping of breakwater evaluated based on scale model tests and numerical analyses results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1249-1253
• /
• 2007

제방은 제내지에 거주하는 인간의 재산과 삶을 방어하고, 홍수를 제어하는 가장 기본적인 수공구조물이다. 제방파괴 원인은 월류, 활동, 침식, 그리고 침투 등으로 분류되어 질 수 있다. 특히 간극수압에 의해 발생하는 침투는 제방 내부침식(internal erosion) 및 파이핑(piping) 등을 야기함으로서 제방파괴를 유도한다. 침투에 의한 제방파괴는 월류나 침식에 의한 제방파괴 유형보다 상대적으로 적으나, 다른 제방파괴 원인을 더욱 활성화 시키는 인자로 작용한다. 도시하천의 경우 높은 치수안전도를 적용하여 제방을 축조함에 따라 월류에 의한 붕괴보다 강우와 하천수의 복합요인에 의한 침투파괴가 중요한 문제로 대두되고 있다. 본 연구에서는 침투와 활동에 대한 안전성을 확보할 수 있는 침투보강기법인 단면확대기법에 대한 적용성 및 유의사항을 수치모의를 통해 검토하였다. 제방 비탈면 경사를 1:2 확대할 경우, 침투유속이 70 %정도 감소되는 것을 확인하였다. 그러나 단면확대기법은 홍수시 통수능과 제내지의 부지 확보 문제 등을 고려하여 적용하여야 하며, 도시하천에서 단면확대기법을 적용하는 데는 일정부분 한계를 가질 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.231-243
• /
• 2016

This study presents the applicability of two-dimensional (2D) flood inundation model by applying to real irrigation reservoir failure with limited available data. The study area is Sandae Reservoir placed in Gyeongju and downstream area of it and the reservoir was failured by piping in 2013. The breach hydrograph was estimated from one-dimensional (1D) hydrodynamic model and the discharge was employed for upstream boundary of 2D flood inundation model. Topography of study area was generated by integrating digital contour map and satellite data, and Cartesian grids with 3m resolution to consider geometry of building, road and public stadium were used for 2D flood inundation analysis. The model validation was carried out by comparing predictions with field survey data including reservoir breach outflow, flood extent, flood height and arrival time, and identifying rational ranges with allowed error. In addition, the applicability of 2D model is examined using different simulation conditions involving grid size, building and roughness coefficient. This study is expected to contributed to analysis of irrigation reservoirs were at risk of a failure and setting up Emergency Action Plan (EAP) against irrigation reservoir failure.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.73-82
• /
• 2017

Recently, offshore bucket cut-off walls were developed to solve several problems in conventional offshore cut-off walls. In this study, a numerical analysis was carried out to investigate the seepage stability of offshore bucket cut-off walls. The ground was assumed as uniform homogeneous sand and steady state flow conditions were applied. The flow condition was compared among 2-dimensional flow (2-D), 2-dimensional concentrated flow (2-DC), and axisymmetric flow. The analysis results showed that the seepage velocities in axisymmetric flow were about 1.5 and 2 times larger than those of 2-DC and 2-D flow conditions, respectively. Thereafter, the axisymmetric flow condition was applied because the seepage flow was concentrated toward the center of the circular-shaped wall. A parametric study was performed varying bucket radius, penetration depth, total head difference between in and outside of the wall. The exit gradient, which used for the calculation of piping stability, decreased with increase of the penetration depth and bucket radius. Design charts were proposed to estimate the factor of safety and the exit gradient at various analysis conditions. Finally, the design equation was proposed to calculate the exit gradient for the preliminary design of the bucket cut-off wall.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1243-1256
• /
• 1997

Object modeling has been cinsidered as an efficient technique for eleciting user requirements and communicat-ing between developers and customers. But model itself is not easy to understand what recult will be after coding and whether it will be meet with the requirements of customers. In this paper, we developed the envuroment for visualization of object model for validating with rewuirnent at the early stage. Therefore, we defined correct and complete rules which can transform the object model.the delierables of Shler/Mellor's method, into a for-mal specification language of VDM(Vienna Development Methods) with a mathematical basis. This basis provides the means of proving that a specification is realizable and proving properties of a system.Therefore.the completeness, preciceness of object model can be verified by proving the transformed VDM specification and prototyping by constructing a visualization supporting enviroment.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.450-457
• /
• 2018

Purpose: The evaluation of seismic performance of critical structures has been emerging a key issue in Korea, since a magnitude 5.8 earthquake, the worst in Koran history, struck Gyeongju, southern area in Korea on september 12th, 2016. In particular, the catastrophic failure of nonstructural components such as sprinkler piping systems can cause significant economic loss or loss of life during and after an earthquake. The nonstructural components can be more fragile than structural components in seismic behavior. Method: This study presents the seismic performance evaluation of fire protection piping system, using coupled building-piping system installed with Triple Friction Pendulum Bearings (TPBs). Kobe (Japan), Kocaeli (Turkey), and GyeongJu (Korea) were selected to consider the uncertainty of ground motions in this study. Result: In the simulation results, it was observed that the reduction of maximum displacements of the piping system with the TPBs' system was significant: Kobe, Kocaeli, and Gyeongju cases were 49%, 14.4% and 21.5%, respectively. Conclusion: Therefore, using seismically isolated system in a building-piping system can be more effective to reduce the seismic risk than a normally installed building-piping systems without TPBs in strong earthquakes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.392-395
• /
• 2009

응답면 기법을 활용하여 댐구조물과 같은 사회간접자본 시설물의 파괴확률을 구할 수 있다. 본 위험성 평가과정에서 응답면기법으로 구성한 한계상태 방정식을 유전자알고리즘의 적합도 방정식으로 사용하면, 핵심타입이나 지반종류, 지반다짐정도 등의 입력설계변수의 최적화 과정 속도를 더욱 신속화 시킬 수 있다. 제안된 응답면 기법과 유전자알고리즘의 복합해석기법은 신뢰성기반 최적화프로그램으로 기존의 유전자알고리즘의 수렴속도를 더욱 빠르게 하여주고, 특히 입력변수의 상하한계가 불확실한 경우에도 만족스러운 수렴성을 보장하여준다. 한계상태 방정식의 목표신뢰도 지수를 변화시켜면 해당하는 입력변수의 최적값을 출력하여주므로, 입력변수의 제약조건에 가격함수와 같은 가중치를 벌칙함수로 부여하면 가격최적화 프로그램으로 작용하게 되며, 시설물 운영자에게는 목표신뢰도에 대한 유지관리 기법과 정도를 의사결정 할 수 있도록 하여주는 기능을 가지게 된다. 조사된 많은 댐구조물의 파괴모드가 시간에 독립적으로 시공중 또는 시공완료 후 5년이내에 다수 발생하는바, 파괴모드를 조사하고 중요한 파괴모드인 파이핑 현상에 대해서 파괴확률을 계산하고 최적유지관리를 위한 개선된 유전자알고리즘 최적화 연산을 수행하였다. 기존 댐구조물과 같이 설계변수와 하중의 변동성을 알기가 어려운 경우에 유지관리비용 최소화를 위해서 본 제안 프로그램의 확장된 버젼은 중요한 기준을 제시하여줄 것으로 기대한다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.1
• /
• pp.15-24
• /
• 2001

흙필터는 일반적으로 침식이나 파이핑으로부터 지반 구조물을 보호하기 위하여 사용된다. 세립자들이 유동하여 필터에 퇴적하는 폐색현상이 발생하는 경우, 간극수압이 증가하고 이로 인해 지반구조물의 불안정을 유발시키게 된다. 미세입자의 유동에 의한 폐색현상은 옹벽의 뒤채움재에 설치한 필터, 흙댐의 저부에 설치된 필터, 그리고 터널의 라이닝 뒤에 설치한 필터 등에서 발생할 수 있다. 폐색현상은 필터의 투수능을 저하시켜 배수능력에 상당한 위험을 초래할 수 있다. 본 연구에서는 필터의 폐색으로 인한 투수능 저하 정도를 실험을 통해 관찰하고 이론적인 모델을 통해 정량화 시키고자 하였다. 일정한 농도의 현탁액이 필터로 유입되는 분리형 실험과 현장상태를 모사하는 흙-필터 시스템의 결합형 실험을 통해 투수능의 저하현상이 압력 제어조건과 유량 제어조건에서 관찰되었고, 서로 비교 분석되었다. 미세입자가 통과하는 필터의 간극을 모세관으로 가정한 후 모세관에서 유체의 흐름 원리를 이용하여 물리적인 폐색에 의해 발생하는 투수능 저하현상을 이론적인 모델로 구성하였다. 일반적으로 투수능은 1/10 수준으로 감소되었으며, 분리형 실험에 의한 결과와 이론적인 모델의 결과는 잘 일치하였다. 또한, 결합형 실험결과와 분리형 실험결과가 비교적 잘 일치하여 투수능 저하예측은 분리형 실험이나 이론적 모델에 의하여 가능하리라 판단되었다.

• Land and Housing Review
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2017

In this study, triggering mechanism of ground sinking was analyzed through groundwater flow analysis on the basis of a case of the ground sinking occurred in Yongsan in 2015. The results of geotechnical investigation performed before and after the ground sinking were analyzed for the accurate understanding of geological features in the study area. The numerical groundwater flow analysis was performed to evaluate the influence of the flow behavior from the surrounding area toward the excavated site using software of Visual MODFLOW. As a result, it was found from the geotechnical analysis that the strata of sedimentary layer along the sunken area in the vertical direction was mixed significantly after the ground sinking compared with the status of the soil condition before the ground sinking. Piping was occurred at the toe of cut-off wall in the sandy gravel layer, and this phenomenon was predicted by the numerical flow analysis. Sequential ground displacement scenario of the ground sinking was derived from the geotechnical in situ test and numerical flow analysis performed in this study.