• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.71-74
• /
• 2005

본 논문에서는 폐목재의 재활용을 위한 1차 파쇄기의 다음 공정인 2차 파쇄기에 대해 경계조건과 하중조건을 적응하여 유한요소법에 의한 ANSYS로 구조해석과 모달해석을 수행하여 응력(stress), 변형률(strain)을 구하고 구조적 타당성을 검토하였다. 이는 안전성을 고려한 설계의 기초 자료가 되며 고유진동수(natural frequency)를 구하여 모터의 회전을 제어함으로서 공진(resonance) 현상을 피하는데 있다.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.19-27
• /
• 2010

The purpose of this research was to see thermal and breaking type characteristics of waste wood for construction materials using high temperature and pressure equipment. In TG/DTA graph weight of waste wood was steeply decreased at $250^{\circ}C$, it has to be treated below $250^{\circ}C$ for construction materials. In popping test the needle-leaved tree was more broken in texture than the broad-leaved tree, especially, Chamaecyparis obtusa(W-7) was the best. The optimum result was obtained at temp. $200^{\circ}C$, pressure 3MPa among the experimental condition.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.80-82
• /
• 2004

본 논문에서는 폐목재의 재활용을 위한 파쇄기의 경계조건과 하중조건을 적용하여 유한요소법에 의한 ANSYS로 구조해석과 모달해석을 수행하여 변위(displacement), 응력(stress), 변형률(strain)을 구하고 구조적 타당성을 검토하였다. 이는 안전성을 고려한 설계의 기초자료가 되며 고유진동수(natural frequency)를 구하여 모터의 회전을 제어함으로서 공진(resonance) 현상을 피하는데 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.355-360
• /
• 2005

The objective of this study is design and structural analysis of 2nd crusher for useless wood. Structural analysis and modal analysis were effected in ANSYS and the structural safety was examined in search of displacement, stress, strain. There are avoid to resonance phenomenon by motor control.

• Proceedings of the Korea Forestry Energy Research Society Conference
• /
• 2011.02a
• /
• pp.81-83
• /
• 2011

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.29-36
• /
• 2009

Recycling of wood wastes or residues is a good solution for a shortage of wood resources and a rise in the price. Shipbuilding wood wastes were almost used to produce the boards by milling. However, considering the economic value and insufficient resource, recycling with milling is dissatisfied method. This study has been carried out to investigate the recycling possibility of shipbuilding wood waste. There are two kinds of shipbuilding wastes: plywood waste and solid waste. From the results of this study, the following conclusions have been made: 1. Bending properties of plywood and laminated plywood lumber were tested by Korean Standard. 2. The main fracture mode of plywood waste and laminated plywood lumber is that of simple tension. 3. The recommended application for the recycling of shipbuilding wood waste are outdoor wood furnishings, indoor wood furnishings and some wooden building construction materials: interior raw material, wooden pallet, siding, paneling, flooring. picnic table, deck components, porch swing, landscaping timbers, residential fencing, patios, and boardwalks etc.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.84-90
• /
• 2012

Patents in Korea, Japan and the U.S. were searched at the Korea Intellectual Property Rights Information Service (KIPRIS) of Korea Institute of Patent Information using related keywords in order to analyze the trend of patents on the usage of waste wood. Materials on a total of 77 patents in Korea, 317 patents in Japan, and 316 patents in the U.S. that had been registered as patents as of Dec. 31, 2011 were collected. Among the collected materials, the patents rejected, expired, annulled, withdrawn and waived as well as those which had little relationship with waste wood were excluded and the 71 patents in Korea, 227 patents in Japan and 216 patents in the U.S. were finally selected for analysis. In addition, the properties of the mortar which used waste wood as an alternative for a part of the fine aggregate were tested as a basic study for the usage of waste wood as a lightweight aggregate for concrete. For the test, the waste wood of the pine tree was crushed, sifted through No. 8(2.4 mm) sieve, and then dried for 24 hours at $100{\pm}5^{\circ}C$. As it is known that some kinds of tree prevent the hardening of cement when the wood is mixed with cement, the crushed waste wood in this study was dipped in the water of $20^{\circ}C$, $50^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$ and then dried up before testing the properties of the mortar to examine the effect of the preliminary treatment of crushed waste wood.

• Horticultural Science & Technology
• /
• v.18 no.1
• /
• pp.33-38
• /
• 2000

This study was conducted in an effort to meet the need for domestic production of hydroponic media and for medium development using recycled hydroponic rockwool slabs. Two experiments were conducted to evaluate the growth of plug seedlings of petunia 'Romeo' in various mixtures including particles of used rockwool slabs (rockwool particles) and wood chips. In the first experiment, seedlings were grown in plugs filled with mixtures of steam- sterilized rockwool particles and chestnut wood chips, which had been weathered for six months and screened through either 2.8 mm or 5.6 mm sieve, at the mixing ratio of 100:0, 75:25, 50:50, 25:75, or 0:100 (v/v). In the second experiment, seedlings were grown in plugs filled with twenty different mixtures of steam-sterilized particles of used hydroponic rockwool slabs with 4 mm chestnut or pine wood chips, coir, peatmoss, or perlite. In the first experiment seedling growth was not affected by particle size of chestnut wood chips, was superior in the control (commercial plug medium) and in 100% rockwool particles, but was suppressed as mixing ratio of chestnut wood chips increased. In the second experiment, leaf length, and shoot fresh and dry weights were the greatest in rockwool particles+peatmoss+coir treatment, followed by rockwool particles+peatmoss treatment. Leaf length was suppressed as ratio of wood chips increased, especially of chestnut wood chips. Root development was the greatest in rockwool particles+peatmoss+perlite treatment, followed by the control, and rockwool particles+peatmoss+coir treatment. The growth was suppressed as the mixing ratio of rockwool particles, peatmoss, or coir decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.210-214
• /
• 2005

The objective of this study is design and structural analysis of crusher for useless wood. Structural analysis and modal analysis were effected in ANSYS and the structural safety was examined in search of displacement, stress, strain. There are avoid to resonance phenomenon by motor control.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.230-238
• /
• 2015

This study was analyzed the operational cost of logging and chipping operations in order to develop the efficient logging operation system for the utilization of forest-biomass. Analysis of the operational cost of logging operation systems, the operation system D which include chain saw, tower-yarder, mini-forwarder and truck was calculated the lowest cost to be $68,498Won/m^3$. In the utilization of forest-biomass, the operation system E which include chipping by mini-chipper at the site, forwarding of chips by mini-forwarder, transportation of chips by truck was estimated to be 90,770 Won/Ton. Thus, These results are determined as an effective operating system for logging operation and the utilization of forest-biomass.