• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.223-234
• /
• 1991

In this paper, the harbor tranquility problem is analysed by an improved boundary integral equation method. The effect of the diffracted wave transformation induced by the breakwater and structures located at a harbor mouth is considered. Partial reflection concept is also used to consider energy dissipation effects. The present model is verified by comparing the results of the model for rectangular and semi-circular harbors with the analytic solutions. they show a reasonable agreement. Also the wave height distribution of the HUPO harbor computed using the present model agree well to those from the previous hydraulic model tests. It also shows a good agreement with the results from the time-dependent mild slope equation model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.382-388
• /
• 2017

This study performed an OpenFOAM-based numerical modeling for simulating performance of wave reduction by a floating vertical plate. Based on the Waves2FOAM library, an internal wave generation and energy dissipation with sponge layers schemes were further implemented. The performance of wave generation and dissipation was first tested with a simple two-dimensional analysis. Then, numerical simulation was carried out with the experimental data of Briggs et al. (2001) for the two regular wave cases. In general, the modeling results agreed well with the experimental data, showing better agreement than the numerical analysis by WAMIT that is included in Briggs et al. (2001).

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.805-814
• /
• 2000

A numerical model based on the boundary element method is employed to describe diffraction of monochromatic water waves due to varying topographies. The model is firstly verified by comparing obtained reflection and transmission coefficients of waves over a trench to those of the eigenfunction expansion method. The model is then used to investigate the Bragg reflection of waves over sinusoidally varying topographies. Calculated reflection coefficients are compared to available laboratory measurements and semi-theoretical results. A reasonably good agreement is observed.served.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.103-103
• /
• 2021

실험실에서의 파랑생성에 흔히 사용되는 피스톤형 조파장치는 수심에 따라 유속이 동일하게 생성된다는 제약이 있어 주로 천해파의 생성에 적합한 것으로 알려져 있다. 본 연구에서는 이러한 제약조건 없이 다양한 유속분포의 파형을 생성하는 수직 다열화된 조파장치가 개발되었다. 우선, 수심방향으로 이산화된 각 패들(paddle)의 스트로크에 대해 선형해석해가 유도되었다. 개발된 해석해는 패들의 수 및 유속분포에 따라 기존의 피스톤형 혹은 플랩형 조파장치 해석해로 근사함이 밝혀짐으로써 포괄적으로 활용될 수 있음이 확인되었다. 즉 개발된 해석해를 활용하면 선택적으로 피스톤형 및 플랩형 조파성능이 구현될 수 있다. 더불어 개발된 해석해는 다상유체의 내부파 생성에도 확정되어 적용가능함이 확인되었다. 다음으로, 개발된 조파장치를 수치적으로 구현하였다. 오픈소스 3차원 수치모형인 OpenFOAM 중, 두 개 이상의 불연속 및 비압축 유체에 대한 Navier-Stokes 방정식을 해결하는 수치 모듈을 사용하여 제안된 수직다열화된 조파장치의 성능이 평가되었다. 이때 동적격자모델(olaDyMFlow)을 결합함으로써 개발된 조파장치 움직임이 물리적 조파장치와 흡사하도록 수치적으로 구현하였다. 모의결과, 여러 개의 다열화된 패들이 층류 흐름 조건에서 심해파를 효율적으로 생성시키고, 중간수심 파랑조건에서는 제안된 조파장치가 상대적으로 덜 유리함을 확인할 수 있었다. 마지막으로 공기, 기름 및 물 등 3상의 흐름조건에서 단 두 개의 패들을 활용하여 각각 내부파 및 표면파를 생성하되었으며, 모의 결과는 해석해과 비교됨으로써 개발된 조파장치의 성능이 검증되었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.429-438
• /
• 2008

The present study is to predict the multidiretional random wave height at the front face and concave corner of a refracted breakwater which is not straight. The numerical simulation on wave height at the front face of an insular breakwater is performed by using the boundary element method, and obtained results have been compared with those of exact- and analytical solutions of the eigenfunction presented by Goda et al. (1971) and the other existing numerical solution. Also, the results of wave-height distribution due to the refracted breakwater have been validated through comparisons with previous results of analytical solution. Based on the validation through these comparisons, several wave-height distributions at the interested region have been illustrated for various conditions related with concave corner angles and the wave incidence, and then the prediction of wave height are simulated at the front face and concave corner of a refracted breakwater under construction currently. Excellent agreements have been obtained in all cases, and this study can effectively be utilized for predicting random waves for various breakwater system.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.435-440
• /
• 2010

A numerical model, which can compute deformation of rubble mound structures composed with various size materials, was proposed. In the numerical model, wave field into the mound structures was computed by CADMAS-SURF and the deformations of mound structures were computed by DEM. Interaction between wave field and sectional deformation of structure was considered and to present the variation of behaviors caused by various properties of materials, computation was carried out with random coefficients by Monte Carlo simulation method for contact stiffness and friction angle. The experiments were carried out with rubbles and glass balls with radius of 2.9cm, 2.6cm and 1.5cm. And the deformation characteristics of rubble mounds composed with various size materials were clarified. Furthermore the validity and the applicability of the model were discussed by comparing with the experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.248-257
• /
• 2011

In the present study, we proposed a new numerical wave tank model to analyze the vertical tension-leg circular floating bodies, using a 2-D Navier-Stokes solver. An IBM(Immersed Boundary Method) capable of handling interactions between waves and moving structures with complex geometry on a standard regular Cartesian grid system is coupled to the VOF(Volume of Fluid) method for tracking the free surface. Present numerical results for the motions of the floating body were compared with existing experimental data as well as numerical results based on FAVOR(Fractional Area Volume Obstacle Representation) algorithm. For detailed examinations of the present model, the additional hydraulic experiments for floating motions and free surface transformations were conducted. Further, the versatility of the proposed numerical model was verified via the numerical and physical experiments for the general rectangular floating bodies. Numerical results were compared with experiments and good agreement was archived.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.21-29
• /
• 2024

In order to respond to environmental changes and various events in the nearby sea area due to the operation of an offshore wind substantiation farm in the Southwest Sea, X-band radar has been installed and operated on a fixed platform since 2018. The X-band radar's monitoring system produces wave and current data through Rutter's Ocean WaveS wave and current (Sigma S6 WaMoS II). In this study, to verify the reliability of the produced data, the accuracy of current and wave data was evaluated by analyzing the correlation with the results obtained by an acoustic doppler current profiler (ADCP). The selected analysis period was a total of 30 days from November 29 to December 28, 2021, the period during which the ADCP survey was conducted. As a result of comparative verification, the current, wave height and peak wave period (H_s > 0.69 m) data observed from the X-band radar showed a high correlation with the results investigated from ADCP. In the future, current and wave data produced by X-band radar are expected to be used as basic data to analyze environmental changes in sea areas and provide information on various events.

• Proceedings of the Korea Society of Costume Conference
• /
• 2003.05a
• /
• pp.40-40
• /
• 2003

본 연구의 목적은 재킷, 와이셔츠, 넥타이 색과 지각자의 성별에 따른 남성 정장착용자의 이미지 지각의 차이를 밝히고, 성별 및 연령에 따른 남성 의복의 색 선호도의 차이를 조사하는 데 있었다. 연구방법은 준실험방법이며, 피험자간(between-subjects) 실험설계를 사용하였다. 2$\times$2$\times$2$\times$2의 요인설계로서 지각자의 성별(2), 재킷 색(2), 와이셔츠 색(2), 넥타이 색(2)을 독립변인으로 사용하였다. 재킷 색은 진남색과 회색을 택하였고, 와이셔츠 색은 흰색과 파란색이었으며 넥타이 색은 빨강과 파랑이었다. 이미지 지각을 측정하는 문항은 6개 차원의 7점 양극 형용사 쌍으로 구성된 의미미분척도였으며, 그 차원은 능력, 품위, 활동성, 선호평가, 남성성, 현시성이었다. 피험자는 서울 시내에 거주하는 20, 30대 남녀 각각 132명씩 총 264명이었다. 자료분석은 SPSS 프로그램을 사용하였으며, 통계 분석방법은 Cronbach의 $\alpha$-신뢰도 계수 산출, t-검증, 사원변량분석, 이원변량분석, 일원변량분석과 Duncan의 다중범위검증을 실시하였다.